In this paper studies are done on stress analysis of rubber material using two different FEA methods: penalty FEA and mixed interpolation FEA.
本文研究了橡胶材料有限元应力分析的两种途径；罚有限单元法及混合插值有限单元法。
Rubber is a very unique material, proper analysis of rubber components require handling the problems of geometric nonlinearity, nonlinear boundary conditions, and material nonlinearity.
橡胶是一种特殊的材料，要实施橡胶制品的有限元分析，就要能综合处理几何非线性、材料非线性以及边界非线性问题。
Using the Simple High order Shear Deformation Laminate Theory and large deformation theory, the geometric nonlinear analysis of rubber rectangular composite laminate plate is presented.
文中应用简单高阶剪切层合理论和大变形理论对各向异性纤维增强的矩形橡胶复合材料层合板进行了几何非线性分析。
Based on the analysis of rubber blank preshrinking mechanism, six factors influencing preshrinking effect are further analyzed. A meaningful investigation on shrink-proof of fabric is conducted.
在分析橡毯预缩原理的基础上，进一步分析了影响预缩效果的六个要素，对织物防缩课题进行了有益的探索。
Be responsible for mass production of rubber, plastic parts and non-ferrous meta analysis and solving quality problem.
负责批量生产过程中橡胶、塑料件及其非金属零件的质量问题的分析、解决。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
The debugging and perfection process of the rubber ball cleaning system was introduced and the result is satisfactory, using the method of combining theoretical analysis and actual testing.
介绍了胶球清洗系统调试和完善的过程，通过理论分析和实际试验相结合的方法，取得了令人满意的效果。
The notable effect of temperature on permeability measure of liquid in rubber and the necessity of keeping the test ambient temperature constant were proved by the theory analysis and typical tests.
通过理论分析和典型试验，证明了温度对液体在橡胶中透过性测量的显著影响和保持试验环境温度恒定的必要性。
This paper presents theoretical calculation method for lateral stability of beam body on rubber seat, based on the analysis of lateral stability of concrete simple-supported beam.
本文在混凝土简支梁横向稳定性分析的基础上，提出了橡胶支座上梁体横向稳定性的理论计算方法。
Based on systematic analysis of integrated disease management system of rubber powdery mildew, a control decision model was established by using computer simulation.
根据综合治理系统的系统分析，用电算模拟的方法建立了橡胶白粉病防治决策模拟模型。
The pyrolysis dynamics of nature rubber, isoprene rubber and butadiene rubber was investigated by thermogravimetry analysis (TG) and differential thermogravimetry analysis (DTG).
利用热重分析(TG)和微商热重分析(DTG)研究了天然橡胶、异戊二烯橡胶和顺丁二烯橡胶的热解动力学。
This paper discussed the characters of rubber dam on the reservoir spillway. From analysis and discussion of the management experience and application, some practical measures were put forward.
阐述了水库溢洪道上橡胶坝的特点，通过对水库溢洪道上橡胶坝应用管理经验的分析，提出了橡胶坝的应用管理措施。
The water Absorption and swelling and physical properties of NBR water swellable rubber was researched by the method of regression analysis.
用回归分析法对NBR制备吸水膨胀橡胶的吸水膨胀性和物理机械性能进行了研究。
The ride comfort of AD250 articulated dump truck is improved through analysis and optimization of the stiffness of laminated rubber spring in balanced suspension.
为了提高AD 250铰接式自卸车的平顺性，对其平衡悬架夹层橡胶弹簧的刚度进行了分析和优化。
The compressive modulus of Elasticity of the butanone rubber gasket are given, based on the compressive test Value of this type gasket, with the analysis and inference method by the authors.
笔者以垫片的压缩试验数据为基础，用分析推理的方法，确定出了丁腈橡胶垫片的压缩弹性模量。
Through the analysis of the transfer function and correlation for rubber vibration absorber, the properties of vibration-absorbing are discussed.
文中对碾轮橡胶减振块的传递函数及相关函数作了研究，分析了其减振性能。
A mathematics model of simulating rubber nonlinear hysteresis characteristics is advanced based on the analysis and disposal of cars' rubber supporting vibration test data.
基于轿车橡胶支承振动试验数据分析和处理，提出了模拟橡胶非线性迟滞特性的数学模型。
The variation of tearing energy with crack size was calculated for the bonded crack of simple shear rubber using non-linear finite element analysis.
通过有限元分析方法模拟简单剪切橡胶件粘结处裂纹扩展时撕裂能与裂纹尺寸的关系。
The Green-Lagrange strain at the critical location determined from the finite element analysis was used for evaluating the fatigue damage parameter of the rubber components.
使用有限元分析测定的关键部位格林-拉格兰奇应变评价橡胶部件的疲劳破坏参数。
Through the technological analysis of the trimming process for the isobutylene-isoprene rubber plugs, the structure of the trimming die has been determined.
通过对丁基橡胶瓶塞切边工艺分析，确定了丁基橡胶瓶塞的切边模具结构。
The pyrolysis mechanism of nature rubber, isoprene rubber and butadiene rubber was analysis by pyrolysis production.
并通过对裂解产物的分析研究了天然橡胶、异戊二烯橡胶和顺丁二烯橡胶的裂解机理。
In this paper, based on the simplified analysis and dynamic tests, the problems related to the stability of laminated rubber bearing in the design of seismic-isolated buildings are discussed.
文章基于简化分析和动力实验，讨论了在隔震建筑设计中与叠层橡胶支座稳定性相关的问题。
Based on simple hypotheses, the Mooney function of rubber elasticity can be obtained by means of pure mathematical analysis, which is more suitable for rubber elasticity in large elastic deformation.
通过简单的假定，由纯粹的数学论证推导出橡胶高弹性的储能函数公式，在橡胶大形变时，公式比统计理论的更能反映客观实际。
The analysis and calculation indicates that the power loss induced by the elastic deformation of rubber hose can not be ignored.
通过分析及计算表明：软管的弹性变形所消耗的能量是不容忽视的。
The characteristic of rubber sealing X-ring change section was concluded. Finite element analysis was made for rubber sealing X-ring change section by using finite element theory and ANSYS software.
总结了X形变截面橡胶密封圈的特点，基于有限元分析理论，借助软件ANSYS对X形变截面橡胶密封圈进行有限元分析。
Based on an analysis of the problems existed in DC voltage withstand test for rubber plastic cable, some methods currently suitable for testing rubber plastic cables are compared.
在分析橡塑电缆直流耐压试验存在问题的基础上，对目前适合的橡塑电缆试验的几种方法进行比较。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
应用推荐