The computer language of MATLAB has many merits on simulation and analysis of control system. In this article the method of the SIMULINK model on MATLAB is introduced.
MATLAB语言在控制系统仿真与分析方面具有众多优点，文章具体分析了基于MATLAB语言的SIMULINK模型的仿真求解方法。
In order to facilitate the analysis and design, mathematical models of control system are established.
为了便于分析与设计，文中建立了控制系统的数学模型。
Based on the qualitative analysis to inverse dynamics of delay system, through modifying conventional fuzzy controller, a new control method which is fit for delay system is presented.
该文在延迟系统逆动力学过程定性分析的基础上，对传统模糊控制器加以改造，提出一种新的适合于迟延系统的控制方法。
A system of measurement and analysis is developed to improve the accuracy and efficiency of measurement and to control the dynamic performance of gyro motor.
为了提高陀螺电机动态性能的测试精度和测试效率，进而控制该性能，开发了一套测试、分析系统。
The amalgamation of SRS technique and real-time signal analysis technique gives birth to advanced shock test real-time control system and this system replaces quickly the common method and technique.
冲击响应谱分析技术与实时信号分析技术的融合，先进的冲击试验实时控制系统技术也随之产生并迅速取代普通冲击试验分析方法与试验技术。
Through the analysis of the controller, and the test of the system hardware of the controller, the concrete parameters were determined, the satisfactory control effect was obtained.
通过对控制器设计的分析，结合系统硬件进一步对控制器进行测试，确定了具体参数，获得了满意的控制效果。
The package has the functions of modelling, system analysis, pole-placement control, optimal control, suboptimal control, LQG, selecting quadratic weighing matrices and system simulation etc.
该软件包具有模型变换、系统分析、极点配置控制、最优控制、次优控制、LQG、二次型权矩阵早优和系统仿真等功能。
In the development of biochemistry analysis instrument, one important constituent is to study the temperature control system.
在生化分析仪的开发研制中，一个重要的组成部分是温度控制系统的研制。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
The results show that this model well conforms to the actual operation and can be used for simulation system construction, system control strategy study and dynamic performance analysis of the system.
结果证明此模型能够与实际运行情况很好地吻合，可用于仿真系统的构建、系统控制策略的研究及系统动态性能的分析等。
To establish the hazard analysis critical control point (HACCP) system for the production of packed meal.
在盒饭生产过程中建立危害分析和关键控制点（HACCP）体系。
In host computer control system, mainly achieve choice of serial communication control, the collection of real-time data updating display and historical data charts analysis.
在上位机监控系统中，主要完成的是对通信设置的选择控制、现场采集数据的实时刷新显示等。
Based on an analysis of the composition of drilling rig, characteristics of drilling process, and human features, a reliability model of man-machine control system for drilling process is established.
在全面分析钻井机械的组成、钻进过程的特点和人的特性的基础上，建立钻机钻进过程人机系统可靠性模型。
This paper focuses on bottlenecks analysis algorithm of information processing for command and control system via stochastic event graphs.
本文研究能用随机事件图模拟的指挥控制系统信息处理瓶颈的分析算法。
On the situation of theory research of network control system gets behind the application, it has important guidance significance for analysis and design of token scheduled network control system.
这在目前网络控制系统理论研究落后于实际应用的情况下，对令牌传递网络控制系统的分析与设计有重要的指导意义。
The test and analysis shows that this type of control system is capable of lessening structural vibration response efficiently.
试验与分析表明，所提出和研制的半主动控制系统能够有效地减小结构的振动反应。
The design of programming part related to the mode of intelligent control system can realize the precision control to multi-points temperature by simulation analysis in computer.
第二部分软件设计，按智能控制系统的模式，实现计算机对多区温度的精确控制。
Solving the algebra equation with real-coefficients of nth degree is of great importance for analysis and synthesis of a control system.
求解高次实系数代数方程的根，对于控制系统的分析和综合设计有着重要意义。
In this paper, an introduction of its applications in power system transient stability analysis and control, planning of switching operation, and disturbance diagnosis is presented.
文中对多代理技术目前在电力系统暂态稳定分析与控制、倒闸计划和故障诊断等方面的应用做了概要介绍。
Based on the analysis of control strategy of the system, this paper used respectively voltage oriented and stator flux oriented vector control in grid side and rotor side of the converter.
在分析了该系统控制方法的基础上，建立了交直交变频器网侧电压定向以及转子侧定子磁场定向的矢量控制系统模型。
The problems of dynamic response analysis of closed loop control system based on probability for the random intelligent truss structures are studied.
针对随机压电智能桁架结构研究了基于概率的结构闭环控制系统动力响应分析模型与方法。
Analysis and design of canal system automatic control usually are conducted with mathematical model of canal operation control.
渠道运行控制数学模型是渠道系统自动控制分析和设计的基础。
A synchronous motor step motion system of current lagging - loop tracking control is designed under the foundation of mathematical analysis for synchronous motor step motion system.
在对同步电动机步进传动系统进行教学分析的基础上，设计组成了电流俗环跟踪控制的同步电动机步进传动系统。
A new stability analysis method of networked control system is provided, and the conditions of network time delay which can make system stable are derived.
提出了一种新的网络控制系统稳定性分析方法，得到了使系统稳定的各网络延时应满足的条件。
By the analysis of the system structure, the main control system and the electromagnetic vibration feeding control system are designed and implemented.
经过对系统结构的分析，设计并实现了系统的主控制系统和电磁振动给料控制系统。
The pneumatic servo valve can preferably be choose and used promoting the precision of control system through the analysis and mathematical modeling of pneumatic servo valve.
对气动伺服阀的分析和数学建模，可以更好的选择利用气动阀，提高控制系统的精度。
The control system testing and analysis software based on DCS is designed to meet the needs of the control system testing and debugging.
根据控制系统试验与调试的需要，设计了一套基于DCS的控制系统试验与分析软件。
The control system testing and analysis software based on DCS is designed to meet the needs of the control system testing and debugging.
根据控制系统试验与调试的需要，设计了一套基于DCS的控制系统试验与分析软件。
应用推荐