The resulting steel appears to achieve a combination of strength and toughness that is comparable to that of modern steels that are very rich in alloy content and, therefore, very expensive.
由此产生的钢似乎达到了强度和韧性的结合，这与合金含量非常高因而非常昂贵的现代钢相当。
The abrasiveness of white cast iron with low alloy content was studied through abrasion test.
通过磨损试验研究了变形对低合金耐磨铸铁耐磨性的影响。
Here an overview of the influence of porosity and alloy content on the Jaminy hardenability of ferrous PM parts is presented.
这篇文章评述了人们不大注意的铁基粉末冶金零件整体淬火时，孔隙度与合金含量对其淬透性的影响。
With the alloy content in the composite fibers increased, the saturation magnetization increases, while the coercivity decreased.
随着复合纤维中合金含量的增加，饱和磁化强度增大，而矫顽力下降。
In particular, the dependence of preparing condition and the alloy content in the samples on their magnetic properties was studied in detail.
特别是详细研究了制备条件和合金含量对材料的磁学性质的影响。
The relative content of a particular element or constituent (i) within an alloy, usually expressed in weight percent or atom percent.
合金中某一元素或组分的相对含量，通常用质量百分数或原子百分数来表示。
The effects of metal base content and NiCr alloy addition on hardness, friction coefficient and wear rate of the composites were studied.
研究了金属基体及其中镍铬合金的含量对复合材料的硬度、摩擦系数和磨损率的影响。
Zinc and cobalt content in zinc cobalt alloy plating bath are determined by the combined method of titration with EDTA and spectrophotometry.
采用EDTA滴定和分光光度相结合的方法测定碱性锌钴合金镀液中的锌、钴含量。
The effects of RE (mixed light RE, 0—0.275%) content in commercial pure aluminium on the structure and characteristics of 7075 alloy are investigated in this paper.
本文研究工业纯铝中含RE（混合轻稀土，含量为0～0.275％）时对7075合金组织和性能的影响。
In this invention, the optimum alloy composition is designed. The influence of the oxygen content on electric property of alloy is revealed.
本研究除根据有关资料设计了最佳合金成分外，着重研究了氧含量对合金电性能的影响。
The results show that when the al content is 9.0%, the alloy has the optimal GFA.
结果表明：当铝的含量为9.0%时，合金具有最优的非晶形成能力。
A simple, selective chelatometric titration method to determine the high content of tin in tin bearing alloy and ore sample is proposed.
提出测定含锡合金和矿样中高含量锡的一种简易、选择性螯合滴定法。
Comparison with EAF dust at carbon and low alloy steel works, the EAF dust at stainless steel works contains more alloy elements but zinc content is lower.
与普碳钢或低合金钢厂电弧炉烟尘比较，不锈钢电弧炉烟尘含有更多的合金元素，但锌含量较低。
Analyze and discuss the standard of alloy tool steel on the basis of producing experience, analyze problems exsited in the new standard and also propose Suggestions and content.
据生产实践，对合金工具钢标准进行了分析和探讨，提出新标准中一些问题的同时，还提出些建议内容。
The hydrogen content and processing edge cracks was one of the important facts that effected the quality of 5005 aluminium alloy casting-rolling strips.
熔体质量和工艺裂边是影响5005合金铸轧产品质量的重要因素之一。
The effect of bath composition, operating conditions and additives on Sn content of electrodeposits during the process of Sn-Ni alloy electroplating in alkaline baths had been studied.
在研究碱性锡镍合金的电沉积过程中，讨论了镀液中各成分的含量、电镀工艺条件的改变及添加剂对锡镍合金镀层成分和外观的影响规律。
The adding rate shall be calculated in accordance with titanium content of alloy to be produced. It can be charged from launder through electric withdrawing or hand operation.
根据所生产合金需钛含量计算出加入速度，用电机牵引或人工均匀地从流槽中加入。
Zinc and cobalt content in zinc cobalt alloy plating bath should be maintained in a suitable range so that corrosion resistant zinc cobalt alloy deposit can be obtained.
为获得耐蚀性良好的锌钴合金镀层，必须维持镀液中的锌钴含量在工艺范围内。
It is found that, on the prerequisite of satisfying the alloy compositions, to increase Fe content as much as possible can improve the machining property of the alloy.
在保证合金成分要求的前提下，应尽可能地提高铁元素的含量，以提高合金的加工性能。
The notched Izod impact strength of alloy increases with the increasing of EMG content in the condition of keeping other mechanical properties.
而随着EM G含量的增加，材料的冲击强度显著提高，且其它的力学性能基本保持不变。
Using the argon gas as protective gas, the content of Sr in alloy was more than that of alloy made by the flux method.
用氩气保护，制备出的合金中锶实际含量高于熔剂法制备的合金。
The chemical Ni P plating mechanism in acid baths and the major aspects which influence the plating rate and P content of Ni P alloy coatings were discussed.
从镍磷化学镀的反应机理出发，讨论了反应中影响磷沉积速率和镀层中磷含量的主要因素，试验制备了含磷量较高且抗蚀性良好的镍磷镀层。
Regarding majority alloy, so long as in atomization time adopts reduced and the oxygen contact, can achieve reduces in the powdered alloy the oxygen content goal.
对于大多数合金，只要在雾化时采取减少与氧的接触，就能达到降低合金粉末中氧的含量的目的。
The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.
通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段，研究了共混（反应）时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。
This paper introduces the analysis method of silver-antimony alloy coating and antimony content.
介绍了银-锑合金镀层和镀液中锑含量的分析方法。
Structural steels, Carbon content. Low-alloy steels. Ferritic and martensitic stainless steels.
结构钢，碳钢，低合金钢，鉄素体和马氏体不锈钢。
The effect of bismuth sulfate content in plating bath and current density on current efficiency, bismuth content and morphology of obtained tin-bismuth alloy was studied.
研究了镀液中硫酸铋含量和电流密度对镀层铋含量、电流效率及镀层表面形貌的影响。
The effect of bismuth sulfate content in plating bath and current density on current efficiency, bismuth content and morphology of obtained tin-bismuth alloy was studied.
研究了镀液中硫酸铋含量和电流密度对镀层铋含量、电流效率及镀层表面形貌的影响。
应用推荐