During the loan application submission, a loan agent provides the loan information such as loan number, loan amount, interest rate, duration, etc.
在贷款申请提交过程中，贷款代理人负责提供诸如贷款号、贷款数额、利率、期限等贷款信息。
The agent selects virtual Tours of available homes and sends them to the businessman's wearable computer at a slow bit rate.
这位代理商选择出对可供出售房子的虚拟旅程，然后以低比特速率传到这位商人的可穿戴电脑。
The results of core flooding experiment and the study of the propagation about the weak gel show that the agent has a high blocking rate and good selection which can modify the water profile well.
岩心流动实验和对弱凝胶在孔隙中运移行为的研究表明，该调驱剂封堵率高，具有良好的选择性，剖面改善效果好。
The rate of commission paid by an airline to an agent in respect of tickets sold or air waybills completed by that agent for carriage on scheduled services.
一家空运企业就代理人为定期航班的运输出售的客票或填开的货运单支付给代理人的代理手续费。
It must choose the sizing agent with high concentration, low viscosity and high fluidity, so can guarantee the constant sizing rate and suitable coverage and soakage.
必须选择高浓度、低粘度和高流动性的浆料组合，以保证恒定的上浆率和比例恰当的被覆与渗透。
The coating level and the amount of poremaking agent can alter the drugrelease rate.
通过调整衣层厚度和致孔剂的用量，可以改变药物的释放速率。
Results 40 cases IMS patients were given endotracheal intubation and mechanical ventilation with cholinesterase agent, 36 cases were rescued, 4 cases died, success rate was 90%.
结果40例IMS患者均给予气管插管行机械及胆碱酯酶复能剂通气治疗，抢救成功36例，死亡4例，抢救成功率90%。
Factors influencing the curing rate and stain resistance of anti-stain agent were discussed.
讨论了影响防污剂固化速度和防污性的诸种因素。
The effects of the agent system on the modification were investigated by testing melt-strength, melt viscosity, the changes of melt flow rate (MFR) and gel content.
通过熔体强度、熔体黏度测试和熔体流动速率(MFR)、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。
The mechanism of curl distortion influenced by polymerization rate and structure of the active diluting agent studied.
对翘曲变形受树脂光聚合速率以及活性稀释剂结构影响的实验结果进行了理论探讨；
In order to improve the aviation structure's damage identification accuracy and rate, a multi-agent decision fusion based on the mutual information classifier selection is proposed in this paper.
为了提高航空结构的损伤识别精度和速度，提出了一种基于互信息分类器选择的多主体决策融合方法。
The mesomeric reaction of L-cystine is greatly affected by the neutralizing temperature and rate as well as the basicity of neutral agent.
中和温度中和速率和中和剂的碱性强弱对L-胱氨酸的消旋化反应影响极大。
The rate of agitation and the amount of suspension stabilizer and crosslinking agent have great effects on the average diameter and water-absorbency.
产物的平均粒径，吸水率受搅拌速度、悬浮稳定剂用量、交联剂用量等因素的影响。
And some problems such as the oxidizing rate and the fully burning of carbon, the composition and shaping of carbonic reheating agent have been analyzed.
讨论分析了碳的氧化速度和完全燃烧，以及碳质发热剂的组成与成型等问题。
Experimental study shows that the damage rate of fracturing fluid to fracture surface is between 31. 84% and 36. 28%; the damage rate to propping agent layer is between 29. 27% and 30. 04%.
针对太2气层的实验研究表明，压裂液对裂缝壁面的伤害率平均在31.84%- 36.28%之间，压裂液对支撑剂层的伤害率平均在29.27%—30.04%之间。
By modifying belief functions and time discount rate, agent can adjust its pricing.
代理可以通过修改信念函数及时间贴现率来调整报价。
The influence of the amount of developing agent contained in developer on the nucleation rate and the dispersity of nucleus was investigated.
本文用受阻显影技术和电镜研究方法研究了显影剂量对显影液中银成核速度和核分散度的影响。
The results show that the elastomeric MMA copolymer R, which is partially compatible with PC, is a very efficient toughening agent and improves the melting flow rate(MFR) for PC.
它是PC非常有效的增韧剂，同时，可以改善PC的加工流动性，二者共混可望开发出有重要实际意义的塑料合金。
The experiment will confirm the quality rate of MA and amylum, the capability of cross-linking agent, the concentration of initiating agent and the effect of bentonite on high hydroscopicity resin.
通过实验确定MA与淀粉的质量比、交联剂的性能、引发剂的浓度以及膨润土对高吸水性树脂吸水性能的影响。
After the addition of combustion-supporting agent, the original microcosmic structure of coke is broken, thus not only increases the combustion rate, but also increases the burn-off rate of the coke.
加入了助燃剂后，焦炭原有的微观形态被破坏，这不仅提高了焦炭的燃烧速率，而且也增加了焦炭的燃尽率。
The polymer water shutoff agent HY was prepared using acrylamide as monomer, adding organosilicon crosslinking agent, sodium persulfate initiator, and reaction rate regulator.
以丙烯酰胺为单体，加入有机硅交联剂、引发剂过硫酸钠、反应速度调节剂，制得聚合物堵水剂hy。
The results showed that the rate of sidereaction was decreased and the product yield was significantly improved by adding a proper tardily releasing agent.
实验结果表明，缓释技术能够减缓连串副反应速率，大大提高产物二甲基乙醇胺的收率。
Furthermore, the quantity and feeding rate of the chlorination agent can be controlled easily.
氯化试剂的用量和进料速度都易于控制，可有效抑制环境污染。
Conclusion MTA should be considered as an ideal pulp-capping agent due to its highly success rate.
结论MTA盖髓治疗成功率高，是理想的盖髓剂。
There are a lot of factors that affect the quality, such as protective agent, freezing temperature, freezing rate, freeze - drying conditions.
影响冻干角膜效果的因素涉及方方面面，诸如保护剂系统，预冻温度，降温速率，冷冻干燥条件等。
Experimental results indicate that compare to single stabilizing agent, compound stabilizing agent has higher plating rate, better stability and lower porosity.
结果表明：复合稳定剂比单一稳定剂镀速高、稳定性好、孔隙率低。
Laboratory test shows that core plugging rate by using the agent is over 90%, recovered rate of permeability is over 85% after washing with water for a long period of time.
室内实验表明，该堵剂可使岩心堵塞率达到90%以上，用地层水长时间冲刷后，渗透率恢复值在85%以上。
When AN - 2 is used as air-floating agent, the air-floating recovery rate reaches 94.91%.
以AN-2为气浮剂，沉淀产物磷酸铵镁的气浮回收率可达到94.91%。
When AN - 2 is used as air-floating agent, the air-floating recovery rate reaches 94.91%.
以AN-2为气浮剂，沉淀产物磷酸铵镁的气浮回收率可达到94.91%。
应用推荐