The product is cubic antimony trioxide after heat treatment in vacuum.
经真空干燥处理后，产品为立方晶型的锑白。
High tension steel the 60kg class is produced after heat treatment process of quenching & tempering.
高张力钢60公斤类生产后的淬火科技回火热处理工艺。
Large area of spalling accured on the work layer of high-Crcentrifugal cast iron roll after heat treatment.
高铬离心复合铸铁轧辊辊身工作层在热处理后发生大面积剥落。
Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
It was revealed from results of XRD that the crystal structure of coating had not changed after heat treatment.
由XRD实验结果可知，热处理后镀层的晶体结构未发生改变。
But the microhardness of the weld bead after heat treatment reduces by 60 HV, compared with origin welded joint.
与原始接头显微硬度值相比，经历高温热处理后接头的显微硬度降低约60HV左右。
Study the influence to hardness value of coating before and after heat treatment with ultrasonic disperser craft.
研究了超声波分散工艺对镀层的镀态硬度及热处理硬度的影响。
Objective To measure the plate glass refractive indices and find its changeable regularities after heat treatment.
目的探索平板玻璃受热后折射率的变化规律。
Next, after heat treatment, the mechanical properties and damping capacity of above deformed alloy was investigated.
接下来，研究了上述变形态镁合金经热处理后的力学性能和阻尼性能。
After heat treatment, particles of the films uniformly refined and orderly, the surface of thin films become smooth.
热处理后薄膜的颗粒均匀细化，并呈现有序化，薄膜表面光滑。
The castings comes to the technique request of the foreign original package accessories completely after heat treatment.
铸件经热处理后完全达到了国外原装配件的技术要求。
The need for drilling to reduce the weight of the gear, should be arranged in borehole sequence after heat treatment for.
需钻孔减轻重量的齿轮，应将钻孔序安排在热处理后进行。
The corrosion resistance of ZE-1 zinc alloy after heat treatment was slightly decreased compared with that of extrusion state.
与挤压态相比，热处理态的ZE - 1锌合金的耐蚀性有所降低。
Its subject coverage includes: role of hydrogen, factors affecting embrittlement after heat treatment, and preventive measures.
它的主题涉及的范围包括：氢的作用、热处理后影响脆化的因素、预防措施。
The results show that after heat treatment, the distribution of nano-diamond particles is more uniform within the composite films.
结果表明，热处理后，纳米金刚石颗粒在复合膜中的分布更均匀；
A higher gear after heat treatment the hardness and strength, and the shaft can be replaced with bushings installed in the operation.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
The gas composition of the controlled atmosphere for the heat treatment affects greatly the surface contents of the steel after heat treatment.
控制气氛热处理的炉气成分对热处理后钢的表面成分有很大影响。
The tensile strength of welded joint is significantly improved after heat treatment and the failure occurred far away from the weld metal zone.
焊接接头抗拉强度大幅度提高，断裂均处在远离焊缝的母材上。
The change and its mechanism of the infrared emissivity of superalloy K424 with deposited Au film before and after heat treatment were investigated.
研究了表面镀金膜的K424合金在热处理前后红外发射率的变化和变化机制。
This is 6000 serial aluminum-magnesium-silicon alloy after Heat treatment with relatively high strength and corrosion reistance and good uniformity.
6000系列为铝、镁、硅合金，是一种热处理型的耐腐蚀性合金。强度和耐腐蚀性较高，均匀性皆较好。
The results showed that the contents of digestible starches went up apparently, and the resistant starches reduced significantly after heat treatment.
实验结果表明：经热作用的淀粉，其可消化淀粉含量大幅上升，抗消化淀粉含量显著减少。
This is 6000 serial aluminum - magnesium - silicon alloy after Heat treatment with relatively high strength and corrosion reistance and good uniformity .
6000系列为铝、镁、硅合金，是一种热处理型的耐腐蚀性合金。强度和耐腐蚀性较高，均匀性皆较好。
After heat treatment, the residual austenite is decreasing and carbides are increasing. The hardness of the surfacing layer is higher than that as welded.
经过热处理后，堆焊层中残余奥氏体的量明显减少，碳化物进一步析出，使得堆焊层的硬度比焊态下有了较大的提高。
Meanwhile, high surface hardness after heat treatment, the coating surface formed into the amorphous and crystalline mixture, the hardness is up to 1200hv.
同时表面硬度高，经热处理后，其镀层表面形成非晶态和晶态的混合物时，硬度可达1200 HV。
The microhardness of the weld bead reduces from the center of joint to base metal before and after heat treatment, and the microhardness of HAZ is minimum.
热处理前后焊缝截面显微硬度均自焊缝中心向热影响区逐渐降低，热影响区显微硬度低于母材。
The dynamic performance, corrosion rate and coking time of the mortar were tested under normal temperature and after heat treatment and corrosion individually.
并用该树脂与固化剂、惰性添料配制了胶泥，测试了其常温、热处理及腐蚀后的胶泥的力学性能、腐蚀率及焦化时间。
On the basis of analysis to microstructure and properties of weld of ERW pipe, types and features of heat treatment and the weld inspect after heat treatment are introduced.
在分析ERW钢管焊缝组成及性能特点的基础上，进而介绍了其在线热处理工艺种类、特点以及热处理后的焊缝检验。
The result of XPS experiment has proofed that the performance changed of the Fe-O, Fe-N-O films is because the composition and structure of film has changed after heat treatment.
XPS实验结果证明薄膜性能改变的原因是热处理后薄膜的成分与结构发生了明显的变化。
The results show that the microstructure before and after heat treatment of spring steels has an impact on their corrosion resistance, particularly in the early stages of corrosion.
结果表明：弹簧钢热处理前后的显微组织对其抗腐蚀性能有重要影响，尤其是钢的初期腐蚀行为。
The mechanisms of stability of the sols and film formations were discussed. The evolutions of the structure of films after heat treatment are discussed by means of TG DTA and IR analysis.
并讨论了溶胶稳定和成膜的机理，通过TG- DTA和IR分析探讨了固体薄膜在热处理过程中的结构变化。
应用推荐