A fixed-bed adsorption model was proposed to simulate the adsorption dynamic processes.
固定床吸附模型模拟了吸附动态过程。
In this paper, we proposed a practical adsorption model called effective adsorption space filling model.
本文提出了一个称为“有效吸附空间充填模型”的实用吸附模型。
Adsorption model, dynamic mechanism and adsorption thermodynamic property of the version zeolite are discussed.
对改型沸石除氟过程的吸附模式、动力学机制和吸附热力学性质进行了研究。
The single phase flow rule of coalbed gas in coal and cleats may be studied by use of non equilibrium adsorption model.
采用非平衡态吸附模型，研究单相煤层气在煤体和割理中的流动规律。
Embeding model and adsorption model were presented in this paper to explain the behaviors of dyes in surface active agents.
提出染料在表面活性剂胶束中的嵌入和吸附模型，对染料在胶束中的行为进行了解释。
For the method of dry impregnation, an imbibition-adsorption model is proposed and its numerical solution has been obtained.
建立了制备载体催化剂干法浸渍步骤的过程模型，给出了该模型的数值解法，并用实验对模型加以检验。
Most prior research used a linear adsorption model which cannot consider monolayer saturation and non ideal surfactant interactions.
前人的研究工作大多采用线性吸附模型，没有考虑液滴与表面活性剂之间单饱和与非理想的相互影响。
The dynamic multicomponent competitive adsorption model was developed in activated carbon bed, and it was solved by using numerical technique.
建立了活性炭床多组分竞争吸附动态模型，并利用数值方法求解。
There are lots of particles adsorbed on wafer surface after CMP. Preference adsorption model was established according to the adsorption state.
CMP后大量颗粒吸附在芯片表面，根据颗粒在芯片表面的吸附状态，确立优先吸附模型。
Supposing adsorption belt moves at a suppositional rate, the adsorption model equation in fixed bed can be set up through material calculation.
将吸附带以某一虚拟速度运动，通过物料衡算可以建立固定床吸附操作模型方程。
The dynamic adsorption model that described the characteristics of small amount of water from tetrahydrofuran on 4a molecular sieve was developed.
建立了合适的吸附动态模型，用于分析四氢呋喃中的微量水在4a分子筛上动态吸附特性。
Adsorption model, the thermodynamics parameters, sticking probability and activation energy of fluor hydronium on modified coke powders were investigated.
考察了改性焦粉对氟离子吸附模型、热力学参数、粘附几率和活化能，初步探讨了吸附机理。
Five-selection simple cubic lattice, self-avoiding walk, and nearest interaction model were used to construct the homopolymer adsorption model on the solid-liquid interface.
模拟中采用五选择简单立方格子上的自回避行走和最近邻相互作用模型；
Based on consideration of stress sensitivity of coal seam permeability, the single-phase flow rule of coal-bed gas in coal and cleats is studied by using non-equilibrium adsorption model.
在考虑煤层渗透率应力敏感性的基础上，采用非平衡态吸附模型，研究单相煤层气在煤体和割理中的流动规律。
While below the dew point pressure, the gas-liquid mixed adsorption model is adopted if the retrograde condensate oil saturation higher than the critical flow saturation of condensate oil;
当压力低于露点压力时，若反凝析油饱和度小于凝析油的临界流动饱和度，采用气液混合吸附模型来进行计算；
Adsorption model for TP mass transfer with XDA-1 resins was set up and the height of mass transfer zone and total mass transfer coefficient in different operation conditions were calculated.
建立了XDA - 1树脂柱吸附茶多酚过程的传质模型，并根据该模型分别计算了不同操作条件下相应的物质总传质系数及传质区长度。
Copper speciation in water and copper adsorption quantity on fish gill surface were calculated by a Biotic Ligand Model.
用生物配位模型计算了铜在水相的形态分布和在鱼鳃表面的吸附量。
By this model, the effects of adsorption time, concentration of chloroform in drinking water and film thickness on the adsorption efficiency were discussed.
应用此模型研究了萃取时间、水样中氯仿的本底质量浓度和高效有机吸附膜厚度等对萃取效率的影响。
The results showed a good agreement between the isotherm determined by frontal analysis and inverse method, and the adsorption data which confirmed the validation of the model selected.
实验结果表明：采用前沿分析法和逆向法确定的吸附等温线与吸附数据吻合很好，验证了所选模型的合理性。
Model by adsorption theory is very practical and supplies a new methods to study sulfur-fixation theory.
经过理论分析及实例验证，说明用吸附理论来研究固硫反应动力学的方法是可行的。
Up to now, study on the DST and dynamic adsorption is in the process of accumulating the experimental data and bringing forward theory model.
目前对动态表面张力和动态吸附的研究，基本上还处于积累实验数据，提出理论假设和模型的阶段。
In this paper, we review the progress in the investigation of asphaltene AD - sorption from the aspects of adsorption mechanism, theoretical model and study methods.
从沥青质吸附机理、理论模型、研究方法等方面对沥青质吸附问题的研究进展加以综述。
The surface diffusion model were established to simulate the adsorption process of sisomicin on the exchange resin D113. The model was solved by orthogonal collocation method.
在动力学研究中，建立了西索米星在D113（皖）树脂上的吸附表面有效扩散模型，利用正交配置法求解动力学模型。
In this paper, the author has proposed a mathematical model to describe the process of adsorption and charge neutralization by hydrolyzed aluminum species on the basis of coagulation mechanism.
通过对凝聚机理和铝盐在水中水解过程的分析，提出了铝盐水解物吸附引起胶体电中和的数学模式。
The adsorption bed structure filling sorbent in tube and flowing heat transfer media out of tube was designed and the corresponding mathematical model was established.
设计了管内填充吸附剂，管外走传热介质的新型吸附床结构，建立了相应的数学模型。
A mathematical model for groundwater pollution in a leaky aquifer system, which involves the adsorption of semipervious layer, is presented.
提出了一个越流含水层系统考虑弱透水层吸附作用的地下水污染数学模型。
Thermodynamic calculating model of adsorption bed in the adsorption solar refrigeration equipment was established.
建立了吸附式太阳能制冷装置的吸附床热力计算模型。
The pool positive phage clones after immune adsorption strongly recognized by the rabbit serum of the new model and the normal model, weakly recognized by the SEA immune rabbit serum.
在经SEA免疫兔血清吸附前，新模型兔血清来源的阳性噬菌体多克隆与SEA免疫兔血清呈阳性反应；
When the pressure is higher than the dew point, the system of condensate gas is gas phase, so the theory model of cavern solution should be use to compute gas adsorption.
当体系压力在露点压力以上时，凝析气体系为气态，应采用空穴溶液理论模型计算气体吸附。
When the pressure is higher than the dew point, the system of condensate gas is gas phase, so the theory model of cavern solution should be use to compute gas adsorption.
当体系压力在露点压力以上时，凝析气体系为气态，应采用空穴溶液理论模型计算气体吸附。
应用推荐