In order to successfully accomplish this the liquid adhesive, or ink should be able to wet the surface of the material.
为了成功地做到这一点的液体粘合剂，墨水或应该能够潮湿的表面材料。
For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.
为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。
Suitable for firming mirror, decoration, self adhesive electrical channel. The foam material can offset the irregular surface of material.
适用于固定镜子，装饰物，自粘固定电管道等，泡棉材料可以弥补材料表面的不规整。
The reason of the failure of epoxy bonded joint in water was that the epoxy adhesive on the metal surface was substituted for water.
环氧胶接接头在水中破坏失效的原因主要是渗入到胶接层的水分子取代了胶粘剂分子在金属表面的粘附。
With this artistically printed adhesive tape you can make a golden frame around any chosen surface.
你用这条经艺术处理的自粘带可以为任何表面做个极好的框框。
There should be no adhesive tape or plastic belt on the wall surface to avoid the formation of joint seepage.
朝墙面不得有粘胶带或塑料带的存在，避免形成结合部缝隙渗水。
Gloss Surface, adhesive performance is good. Customizable volume installed and single stick to use.
表面光泽度，胶粘性能良好。可定制卷装机贴或单张使用。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
Not surprising. You have no safety mat or adhesive stickers to allow for purchase on surface with a low coefficient of static friction.
你既没有防滑护垫也没有不干胶贴纸导致浴缸表层静摩擦系数低，因此摔倒也不足为奇。
Surface decoration of small coloured components-such as stone, glass, tile, or shell-closely set into an adhesive ground.
用各种颜色的小块材料如石块、玻璃、瓷片、贝壳等紧密地拼集成各种图案的装饰工艺。
If required, rub with fine abrasive paper or lightly blast with suitable grit all the surface to which adhesive will be applied.
如果需要，使用细砂纸打磨或用适当的砂粒轻度喷吹所有的拟敷胶表面。
The method and adhesive process for Sodium-Naphthalene solution activating Polytetrafluorethylene (PTFE) surface were described, and the properties of adhesive were tested.
叙述了钠—萘溶液活化聚四氟乙烯表面的方法和粘接工艺，并测试了粘接件的主要性能。
A is a surface protective film with low adhesive, which is mainly made of special olefin polymerization processed by our independently developed multi-layer coextrusion technology.
是低粘表面保护膜，主要是特殊烯烃类聚合物采用自主开发的多层共挤技术制造而成。
The prepared ink has good solution viscosity, surface force, solvent resistance and adhesive capacity.
墨水溶液粘度、表面张力及耐溶剂性能、粘附性能均较佳。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
Material to be bonded after the initial setting, with bamboo and other materials scrape off excess adhesive, then brush the surface of the gap repair.
待粘接料初凝后，用竹片等将多余的粘接料刮去，再用毛刷修理缝隙表面。
The soil adhesive strength is mainly composed of capillary pressure and viscous resistance of the water film, which are affected by the nature of solid surface.
土壤粘附强度主要由毛细管作用力和界面水膜粘滞力构成，固体表面性质对其产生影响。
The mixture of titanium powder and adhesive was smeared on the surface of the major branches of L4 and L5 nerves, lumbosacral trunk, femoral nerves and obturator nerves.
显露l4、L5神经前支、腰骶干和骶髂关节前方，将钛粉和粘合剂的混合物均匀涂抹在L 4、L5神经前支、腰骶干、股神经神经以及闭孔主干表面。
The former refers to exist in a non solid form in the construction of synthetic materials, such as adhesive, surface spray materials;
前者是指在合成材料的施工在非固体的形式存在，如胶粘剂、表面喷涂材料；
Flexible linear LED modules consist of surface-mounted LEDs on long, thin, flexible circuit boards that usually have self-adhesive packings and are packaged in reels.
灵活的线性LED模组是将LED安装在狭长的柔性线路板上，该线路板背面通常都是自粘式的，并且打包成卷状。
Second, it will be dipped into a nickel solution to improve the adhesive qualities of the surface.
第二步，它会被浸到镍溶液中以加强表面的附着性。
When an adhesive is bonded on an item or surface numerous physical, mechanical and chemical forces come into play, which any have an effect on each other.
当粘合剂粘接到一个物体上或者表面上时，就会出现许多物理的、机械的和化学的力，它们彼此之间会相互影响。
Said first surface (24) of said object (22) is positioned on said adhesive layer (12), so that a first part (26) of said adhesive layer (12) contacts said first surface (24).
所述物体(22)的所述第一表面(24)被设置在所述粘合剂层(12)上，使得所述粘合剂层(12)的第一部分(26)与所述第一表面(24)接触。
Dielectric barrier discharge (DBD) can be applied to modify polymer surface to improve its wettability and adhesive strength.
介质阻挡放电(DBD)处理聚合物表面可有效提高其亲水性和结合强度。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
Thirdly, apply the mixed adhesive with a short brush, on dried joints surface.
用短毛刷将配合后的粘合剂分两次均匀涂刷在干燥的接头表面。
Classified according to characteristics of surface materials, adhesive materials into paper, film adhesive materials and special adhesive materials.
按面材特性分类，分为纸张不干胶材料，薄膜不干胶材料和特种不干胶材料。
It is analyzed of the residual stress generating procedure in adhesive coating layer on the surface of port crane parts for the purpose of surface protection or repairing.
分析了用于港机部件表面保护和修复的涂层中通常存在的内应力的产生过程，认为它是导致涂层早期破坏的主要原因之一。
It is analyzed of the residual stress generating procedure in adhesive coating layer on the surface of port crane parts for the purpose of surface protection or repairing.
分析了用于港机部件表面保护和修复的涂层中通常存在的内应力的产生过程，认为它是导致涂层早期破坏的主要原因之一。
应用推荐