The adhesion platelets of PLGA coating were more, and some platelets deformed and the parapodium stretched out.
聚丙交酯乙交酯涂层表面黏附血小板较多，个别血小板变形伸出伪足。
When this glass coating contact with sea water, it releases copper ions which inhibit adhesion of sea creatures.
当此玻璃涂层与海水接触时，释放出的铜离子阻止海洋生物附着在涂层上。
Regardless of color coating, paint, silver bottom paint, should use good quality, in order to increase the adhesion, gloss.
不论喷涂、纯色烤漆、银底烤漆，应该运用质量杰出，以增加附着性、光泽度。
The abrasion, impact and adhesion test was conducted with nylon 1010 coating.
对尼龙1010涂层做了磨耗、冲击和附着力试验。
RESULTS Hydroxypropyl cellulose is extensively used in tablets, capsules, mucous membrane adhesion preparation, sustained or controlled release preparation, and film coating, etc.
结果羟丙基纤维素在片剂、胶囊剂、黏膜黏附制剂、缓控释制剂等多种制剂以及薄膜包衣方面均有良好应用。
Copper plating, improve electricity with: render coating adhesion ability, and corrosion ability.
镀铜：打底用，增进电镀层附着能力，及抗蚀能力。
A type of coating applied to the substrate surface to improve adhesion of a subsequent topcoat. To improve corrosion resistance, hiding power, surface smoothness.
一种用于涂装基材表面改进顶涂附着力的涂层，改进耐腐蚀性能，遮盖力，表面平整度。
In addition, the solder mask coating on printed circuit board, with the plasma treatment, can also obtain certain roughness and high active surface, thus improving the solder coating adhesion.
另外，在阻焊膜涂覆前，用等离子体对印制电路板面处理一下，还可获得一定的粗糙度和高活性的表面，从而提高阻焊膜层的附着力。
The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.
在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。
Test used to check for adhesion of a coating to the surface usually following a mechanical test.
通过一个机械试验检查表面涂层的附着力。
Adjustment in preheated control, die-to-roll distance, and roll pressure can be made to modify substrate adhesion. Coating weight is usually controlled by adjusting line speed.
预热控制的调整，模具到卷轴的距离，以及卷轴的压力都可以修改基层黏合。生产线的速度通常控制涂料的重量。
The commercial production and applications of diamond coating tools a re always restricted by the poor adhesion power between diamond coatings and cemented carbide substrates.
金刚石薄膜与硬质合金基体间的附着力较低一直制约着金刚石薄膜涂层工具的商业化生产和大规模应用。
Coating liquid capable of reducing fingerprint adhesion, manufacturing method thereof, and products coated with the coating liquid.
用于降低指纹粘附的涂料液体，其制造方法，以及涂有该涂料液体的制品。
Multi - coating availably solves the problem of matching between basic material and coating, but the technology of multi - coating seriously affects the adhesion.
复合涂层可有效地解决基膜的匹配性，但多层涂镀工艺对涂层间附着性等质量问题有重要影响。
Asphalt paint coating is used to transport gas pipeline. Preheating before painting can improve the adhesion of asphalt paint, accelerate drying.
沥青漆涂层是用于输送燃气的管道。喷漆前对管子进行预热可以提高沥青漆的附着力，加速干燥。
A integrated condition in interface between bioactive gradient coating and metal substrate and its influence for adhesion of coatings were explored in this experiment.
实验着重探讨了生物活性梯度涂层与金属基体的界面结合状态及其对涂层附着强度的影响。
They are not widely used on their own as they tend to severely affect coating and glue adhesion.
但由于严重地影响涂料和胶料的粘结作用，所以一般不单独使用。
B. characteristics: nylon coating, surface gloss good, adhesion, high abrasion resistance, resistant to moisture, corrosion resistance, ageing resistance.
特性：尼龙涂层，表面光泽度好，附着力强，耐磨，耐潮湿，耐锈蚀，耐老化。
Then the prescription is optimized by orthogonal method. Thus a sodium silicate composite coating with good water tolerance and strong adhesion is prepared.
然后利用正交法优选配方，制得耐水性良好、附着力强的水玻璃复合涂料。
It was found that incorporation of adhesion promoters will not influence the other properties of fluorocarbon resin coating, and will improve the water resistance and adhesion on various substrates.
试验结果表明：加入附着力促进树脂的氟涂料对其综合性能基本上无影响，但可改善涂膜的耐水性和提高其对多种底材的附着力。
Degreasing and pickling treatment will lead to the formation of good adhesion of the coating is not good, not on the zinc or zinc coating layer.
脱脂及酸洗处理欠好会形成镀层附着力欠好，镀不上锌或锌层掉落。
Humidity - humidity so high that the coating adhesion with the wall fell, resulting in coating blistering and blur, so the humidity is less than 10%.
湿度—湿度过高使涂膜与墙体附着力下降，造成涂膜起泡和发花，故湿度要求小于10%。
The different kinds of factors which affect the adhesion of the film in its coating are described and analyzed.
论述薄膜生长过程中影响薄膜附着力的各种因素，针对其相关因素作了具体的理论分析。
Our factory produce radiator set decoration, heating on a surface by the phosphate treatment using special plastic powder electrostatic spraying, coating adhesion, strong, bright color.
我厂生产的散热器集装饰、取暖于一身，表面经磷化处理后采用专用塑粉静电喷涂，涂层附着力强，色泽艳丽。
Bending method more tape law strictly, there are many occasions tape can't test method is the coating adhesion.
弯曲法比较胶带法严格，有很多场合胶带法是无法测试镀层的附着力。
These test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film.
这些试验方法覆盖了对金属涂层片附着力的评估。附着性通过在涂层切口处施加和去除透明压敏胶带来评估。
Moisture is an important factor influencing storage and ng's migration is related to the adhesion between coating and propellant.
而水分是影响其贮存的一个重要因素，NG迁移则和包覆层与推进剂的粘结具有密切关系。
The effects of resin, 3D stereo apparition agent, adhesion accelerator and anti-sediment agent on coating performance were discussed.
讨论了树脂、3D立体魔幻剂、附着力促进剂、防沉剂等对涂料性能的影响。
The bubbling, flaking, loss of wet adhesion and et al of the coating film occurred under the action of hot water, dissolved oxygen, corrosive chlorium and et al are introduced.
针对水箱中高湿热腐蚀环境，介绍了涂层在热水、溶解氧及腐蚀性氯离子等影响因素作用下发生的鼓泡、脱落、湿附着力丧失等现象。
The bubbling, flaking, loss of wet adhesion and et al of the coating film occurred under the action of hot water, dissolved oxygen, corrosive chlorium and et al are introduced.
针对水箱中高湿热腐蚀环境，介绍了涂层在热水、溶解氧及腐蚀性氯离子等影响因素作用下发生的鼓泡、脱落、湿附着力丧失等现象。
应用推荐