Designe the hardware and software of grinding force adaptive control system based on MSP430.
设计了以MSP430单片机为核心的磨削力自适应控制器的硬件、软件部分。
A simple adaptive control system was designed for constant tension of double stand Revere cold rolling mill.
为保证双机架可逆冷轧机轧制中带钢恒张力，设计了恒张力简单自适应控制系统。
Then, applying adaptive control system based on improved fuzzy neural network, a TCBR controller is designed.
然后应用一种改进的模糊神经网络自适应控制系统，设计了TCBR的控制器。
This paper researches the adaptive control system of discrete time reference model of input saturation character.
就输入存在饱和特性的离散时间参考模型自适应控制系统进行了探讨。
This paper is concerned with a design of a model refenrence adaptive control system (MRACS)for a nonminimum phase system.
探讨了关于非最小相位系统的参考模型自适应控制系统（MRACS）的一种设计方法。
Based on Liapunov's stability theory, this paper puts forward a model reference adaptive control system with parameter compensation.
本文基于李亚普诺夫稳定性理论，提出了一种参数补偿的模型参考自适应控制系统。
This paper presents the design method of this type of nonlinear adaptive control system and its out loop trajectory tracking controller.
本文主要介绍这种非线性自适应控制系统及其外回路航迹跟踪控制器的设计问题。
The mathematic model for the computer adaptive control system of roller temperature of the leather rolling production line is established.
论述压延革生产线轧辊温度的微机自适应控制系统数学模型。
A constant force hybrid adaptive control system is designed for four rollers cold rolling mill to ensure that strap steel force is constant.
为了保证冷轧机轧制中带钢恒张这一特点，设计了四辊可逆冷轧机恒张力混合自适应控制系统。
In this paper, the coke oven is thought as a kind of hybrid systems, the coke oven heating intelligent adaptive control system is developed.
本文将焦炉作为一类混合系统，研究并开发了焦炉加热智能自适应控制系统。
A new design scheme for model reference adaptive control system is presented. This design scheme makes the system possess strong robustness.
提出了设计模型参考自适应控制系统的新方案，该方案使系统具有强的鲁棒性；
Based on Lyapunov stability theory, the sufficient condition for the global stability of the decentralized adaptive control system is proved.
根据李雅普·诺夫稳定性理论，文中证明了这种分散自适应控制系统全局稳定的充分条件。
In this paper, the optimization design for self-adaptive control system of feed-forward neural network is proposed based on chaotic variable.
基于混沌变量，提出一种神经网络自适应控制系统的优化设计方案。
Compared with the traditional PID electrode regulator system of EAF, the simulating results show the advantage of self-adaptive control system.
与传统的PID控制相比较，结果表明自适应控制系统优于PID控制系统。
In this paper, the problem of pre-trigger existing in dynamic spot welding self-adaptive control system is researched on the basis of experiments.
对动态电阻点焊自适应控制系统中存在的提前触发问题进行了实验研究。
The distributed PID function model can be widely used in sliding-mode control system, self-adaptive control system and internal-mode control system.
分散PID功能模型可以广泛应用于滑模控制系统、自适应控制系统和内模控制系统。
This work develops a design approach to nonlinear adaptive control system with unknown parameters and applies it to excitation control of power systems.
针对含有未知参数的励磁系统，提出了一种非线性自适应控制设计方法。
It is proved that all the signals in the adaptive control system are globally uniformly bounded, and the regulation error converges to zero asymptotically.
证明了自适应控制系统的所有信号全局一致有界，调节误差渐近收敛到零。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
The structural analysis method of the continuous rigid frame bridge and the theories of adaptive control system and method of control were discussed in this paper.
本文论述了连续刚构桥结构分析方法、自适应控制系统的理论和控制方法。
Finally, we use the oscilloscope to observe the test results table analysis. The results further verify the correctness of the adaptive control system theory is correct.
最后使用示波表对试验结果进行观察分析，正确的结果更进一步验证了本文自适应控制系统理论的正确性。
In order to overcome the nonlinearity and time-varying uncertainty of actual industrial processes, an adaptive control system based on linearization error model is proposed.
针对实际工业生产过程中的非线性、时变不确定性，提出了一种基于线性化误差模型的自适应控制系统。
The software simulation and hardware experimentation results show that self-adaptive control system can regulate the electric arc-furnace electrode efficiently and reliable.
软硬件仿真和实验都表明，自适应控制能够高效、可靠的对电炉电极进行调节和控制。
The mode of machining pattern recognition has been successfully used in the adaptive control system for milling process and the result has been an important basis for control.
该工况辨识模型已成功的用于铣削适应控制系统，辨识结果为控制提供了重要的依据。
Simulation analysis proves that the fuzzy adaptive control system is able to realize intelligent control of NC machining with higher identification as well as control precision.
结果表明所建立的模糊自适应控制系统能够以较高的辨识与控制精度实现数控加工的智能自适应控制。
The paper presents a new adaptive control system based on PID-like neural network, gives the learning algorithm of this new controller and analyses stability of the control system.
本文提出了一种新的基于PID型神经网络的自适应控制系统，给出了神经网络控制器的学习算法和控制系统的稳定性分析。
The paper presents a new adaptive control system based on PID-like neural network, gives the learning algorithm of this new controller and analyses stability of the control system.
本文提出了一种新的基于PID型神经网络的自适应控制系统，给出了神经网络控制器的学习算法和控制系统的稳定性分析。
应用推荐