It can improve the accuracy of machining and get a better thermal performance.
此种方式可以提高设备的精确性从而得到更好的热量循环。
An instrument to measuring location accuracy of machining center, planar grid encoder, is introduced in this paper.
介绍一种测量加工中心位置精度的仪器——平面正交光栅。
With the improvement of product performance and accuracy of machining, LS-WEDM has increasingly played an important role in the field of mechanical machining.
随着对产品性能和加工精度要求的不断提高，低速走丝电火花线切割加工在机械加工领域中的地位日益突出。
It is shown that when the jig is designed on probabilistic theory, the requirement of accuracy for the jig can be reduced or accuracy of machining can be raised.
结果表明，当夹具按概率理论设计时，可以降低夹具的精度要求或提高加工精度。
By use of suitable clamping apparatus, we could improve labor efficiency, raise the accuracy of machining, reduce the quantity of waste product and improve labor intensity.
利用合理夹具能提高生产效率，提高加工精度，减少废品，改善操作的劳动强度。
According to the structure of burner shells, the accuracy of machining burner shells is analysed in detail, and the chief factors which affect machining accuracy are found out.
根据燃烧器壳体的结构特点，对已加工好的燃烧器壳体就其在加工中所出现的精度问题进行了分析，找出了影响加工精度的主要因素。
The main objective of virtual machining process is to predict and improve machining accuracy.
虚拟加工的主要任务是预测和改进被加工件的加工精度。
The servo driver has been tested on the machining center, up to the accuracy of micron order.
该伺服驱动器在加工中心的实际应用中得到了微米级的加工精度。
Reform the structure of generator set, enhance machining accuracy, reduce noise made by electromagnetism and fans from design.
改善发电机结构，提高加工精度，从设计上减少发电机所产生的电磁及风扇噪音。
The machining experiments for turbine blade were developed to verify the design accuracy and reliability of this fixture.
通过叶片加工试验验证了所设计夹具的精度和可靠性。
On the one hand, the plane positioning is stable and reliable, on the other hand, it is easy to process holes on the machined surface, and can improve the machining accuracy of the hole.
一方面，平面定位稳定可靠，另一方面，在加工过的平面上加工孔比较容易，并能提高孔的加工精度。
Interelectrode clearance is one of the most important parameter of it, keeping minimal clearance while machining will improve the part's surface gloss and size accuracy.
极间间隙是对脉冲电化学光整加工具有重要影响的工艺参数，保持极小的极间间隙加工，可以提高工件的表面光泽度以及加工的尺寸精度。
The application of process of vane wheel profile forming can ensure the machining accuracy and improve the productive efficiency.
采用成形铣削加工叶轮型面，保证了加工精度，提高了生产效率。
The result shows that the changing velocity of the errors has influence on the machining accuracy of the gear and the choosing of the compensating methods.
结果表明，滚刀与工件间的相对偏差变化速度的快慢不仅影响到齿轮加工精度，还影响到误差补偿方法的选取。
Honing is one of the effective processes in the machining accuracy deep hole.
深孔精加工中，珩磨是一种行之有效的加工工艺。
The side gap and frontal gap between the cathode and anode were investigated, because they had significant influence upon the machining accuracy and localization of ECM.
针对微细电解加工的特点，阐述了底面间隙和侧面间隙之间的关系，并研究了它们对加工精度和定域性的影响。
The dimensional accuracy of electrical discharge machining(EDM) is greatly influenced by the overcut resulting from the discharge gap and electrode wear.
电火花加工工件的尺寸精度受过切量影响，而过切量的大小主要取决于放电间隙和电机损耗。
In this paper, the technology of machining accuracy prediction was deep researched.
本文对加工精度预测技术进行了深入研究。
The technique is helpful to the study of gear-messprocess formulation of accuracy standard and improvement of gear machining.
这种新技术对齿轮啮合过程的研究、精度标准的制订和齿轮加工技术的改进有深远的影响。
The tooth side slack of the gear influences the machining accuracy of NC machine tool directly, so, taking out the slack of feed drive gearing is an important item in the machine tool rebuilding.
齿轮的齿侧间隙直接影响数控机床的加工精度，因此，进给系统传动间隙的消除是机床数控改造的一项重要内容。
The testing results showed that the rise-temperature of spindle bearings can be reduced, the thermal stability of spindle axis and the machining accuracy of machine tool can also be improved.
试验结果表明，这种热管不但能降低主轴轴承的温升，而且可大大提高主轴轴线的热稳定性，从而提高机床的加工精度。
Structural dynamics optimal design is an effective approach to improve the machining accuracy of machine tools.
结构动力学优化设计是提高机床加工精度的有效途径。
The machining accuracy of microbit is worse for the vibration of grinding wheel spindle.
微型钻头磨床砂轮轴振动严重地影响了钻头加工精度。
And the static and dynamic systems of Servo system affect positioning speed, positioning accuracy and machining accuracy of numerical control machine tool directly.
而伺服系统的静态、动态性能直接关系数控机床的定位速度、定位精度和加工精度。
The conclusion condensed fron this paper will be helpful to the further study of theory about gear error and to keep the accuracy of gear machining stably on grade 7.
本文的结论对进一步深化齿轮误差理论的研究及进一步稳定7级齿轮加工精度是有益的。
Based on the actual situations of errors influencing machining accuracy for horizontal machining center, accuracy system for cube machining area of the machine is established.
根据卧式加工中心加工零件时影响加工精度的误差实情，建立起机床立方体工作区精度系统。
Based on the actual situations of errors influencing machining accuracy for horizontal machining center, accuracy system for cube machining area of the machine is established.
根据卧式加工中心加工零件时影响加工精度的误差实情，建立起机床立方体工作区精度系统。
应用推荐