The abrasive sheet includes an abrasive support layer with abrasive particles arranged thereon, thereby defining an abrasive surface.
所述磨料片包括设置其上的带磨粒的磨料支撑层，从而限定了磨料表面。
The abrasive mechanism of rolled white cast iron with various matrixes are studied by investigating the microstructure, abrasive surface and mechanical properties of specimens.
通过对不同基体组织轧制白口铁的金相组织、磨损表面和机械性能的分析，研究了具有不同基体组织轧制白口铁的磨损机理。
Authors suggest the linear relationship between the anti-abrasion parameters consisting of the amount and distribution of carbides, abrasive surface hardness and the abrasion resistance in this paper.
本文还提出了由碳化物数量、分布、磨损面硬度等因素构成的抗磨参数与相对耐磨性的线性关系。
In the late Middle Ages, it was customary to scrape away the surface of the parchment with an abrasive, which completely wiped out any writing that was there.
在中世纪后期，人们习惯用磨料刮去羊皮纸的表面，把纸上的所有文字都擦得干干净净。
Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
Aluminum Oxide Specific gravity 2.4 Moh hardness 3. More a filler than an abrasive. Tends to fade, but has good wear resistance. Will polish the opposing surface.
氢氧化铝比重2.4莫氏硬度3。比磨料加得更多的填充物。有衰退趋势，但耐磨性好。将抛光对偶。
In the low wearing area of the loose abrasive of tiny particle, wear mechanism is mainly the micro-cuts wearing mechanism, and the surface has obvious furrow and indentation.
在小颗粒松散磨料的低磨损区，磨损机理主要是微观切削磨损机理，表面有明显的犁沟或者印痕。
It is proved by experiments that under appropriate machining conditions, abrasive belt vibration grinding can not only reduce workpiece surface roughness but also improve work-piece form accuracy.
实验表明，在适当的加上条件下，砂带振动磨削不仅可以降低工件的表面粗糙度，而且可以提高工件的形状精度。
An analysis model which can predict grinding force and surface roughness of aluminum alloy with abrasive belt grinding by using artificial neural networks was established.
建立了采用人工神经网络方法预测砂带磨削铝合金时磨削力和磨削表面粗糙度的分析模型。
When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.
纳米级的磨粒冲击到工件表面，在以原子级去除的同时伴随着塑性变形的发生。
In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.
采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。
Ink rub: Smears of ink caused when the surface of an abrasive paper, often matt art, rubs against the ink film before it is completely dry.
油墨擦花：具研磨剂的纸，通常是无光粉纸，当它面上的油墨未干而与另一张纸磨擦所造成的擦拭花情况。
A substance containing chemical agents or abrasive particles and applied to smooth or shine a surface.
上光剂；擦亮剂含有化学媒质或粗糙微粒的一种物质，被用来打光或擦亮一个表面。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
If the stainless steel surface of the hair pattern processing, please follow the direction of abrasive cleaning.
若不锈钢表面有发纹加工时，请沿着研磨方向清洗。
The sleeve surface processing is discussed, choosing different abrasive, time and pressure will result in different surface shape and rough parameter.
讨论了套筒表面的喷砂处理，选择不同的磨料、时间及压力可得到套筒不同的表面形状及粗糙度。
The relation between the flow conditions and material surface abrasive erosion of the pump impeller has been studied.
研究了过流条件与泵轮叶片表面冲蚀磨损的关系。
Based on the theory of abrasive water jet, surface polishing using abrasive water jet techniques was studied in detail.
论文以磨料水射流理论为基础，对磨料水射流表面抛光技术进行了详细研究。
By make experiment of plunger case surface abrasion hardness, in the last, adopt high strength engineering plastic to act as anti-abrasive material, make the success, get great result.
通过对柱塞的表面耐磨层进行各种试验，最后采用了高强度工程塑料进行压注试验，取得了成功，效果显著。
The top grade silica abrasive, gently remove tooth surface dirt and tooth enamel surface doesn't hurt, often use, strong teeth, healthy mouth.
采用高档二氧化硅磨料，轻柔去除牙表面污垢的同时不伤害牙表面珐琅质，经常使用，强健牙齿，健康口腔。
The paper introduces image edge extraction technology in order to make a distinction between abrasive objectives and settings on the surface of abrasive image.
为了区分磨损表面图像中的磨损目标与背景，本文引入了图像边缘提取技术。
The results show that abrasive water jet polishing surface has a good effect and can improve the surface hardness, surface fatigue strength. The lower the surface hardness, more obvious the effect.
研究表明，微磨料水射流对工件表面具有良好的抛光作用，并能在抛光的同时提高工件表面硬度、表面的疲劳强度，且硬度低的工件表面效果较为明显。
Orthogonal experiment shows that the time is the main factor of removal rate and abrasive granularity is the crucial factor of surface roughness.
通过正交试验证明加工时间是影响去除量的主要因素，而磨料粒度对表面粗糙度影响较大。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
Repair or replace the electric brush; clean the commutator surface by abrasive paper and blow it clean.
修理或调换电刷，用木砂纸清理整流子表面，并吹净。
It was believed that the abrasive track on the surface of counterpart (steel 45) resulted by oxide particles was not severe on large load.
作者认为，在较大载荷下，颗粒氧化物对配偶件(45钢)的磨损影响不大。
Liquid-magnetic abrasive tool finishing is a kind of new technology on precise surface finishing.
液体磁性磨具光整加工技术是一种新型的精密表面光整加工技术。
Liquid-magnetic abrasive tool finishing is a kind of new technology on precise surface finishing.
液体磁性磨具光整加工技术是一种新型的精密表面光整加工技术。
应用推荐