Comes with one 14 "abrasive cutting wheel."
带有一个14英寸切割砂轮。
Similar hardness and white fused alumina, white fused alumina than in the high toughness, abrasive cutting edge sharp edges and corners to keep good, high durability.
与棕，白刚玉相比硬度高，韧性大，呈单颗粒球状晶体，具有良好的多棱切削刃，抗破碎较强。
Hardness than corundum, abrasive easily broken, sharp edges and corners, good cutting, grinding heat and small.
硬度高于棕刚玉，磨粒易破碎，棱角锋利，切削性能好，磨削热量小等。
With the increase of cutting depth, under the impact of abrasive particles with a large Angle, an oblique stripe deformation of the grinding zone are formed.
随切深的增加，材料在磨料粒子大角度冲击下形成斜条纹状的变形磨削区。
Good effect of cutting brittle materials such as concrete by premixed abrasive water jet shows that this clod cutting technology has a unique advantage in the schoolwork under urgent conditions.
前混合磨料水射流对混凝土等建筑脆性材料具有良好的切割效果，在易燃易爆等应急场合进行切割作业具有独特优势。
They are used for abrasive grinding, cutting, polishing.
它们可用于研磨、切割、抛光。
This paper elaborates on the Artificial Neural Network application to the abrasive water jet cutting technology.
主要叙述了人工神经网络理论在磨料水射流切割技术中的应用。
The hydraulics and abrasive parameters of premixing jet has great effect on casing cutting efficiency.
水力参数和磨料参数对前混式磨料射流切割套管的效率有着极重要的影响。
First, resin grinding tablets, cutting tablets from carborundum abrasive resin from chemical processing of raw materials.
树脂打磨片、切割片由金刚砂磨料树脂化工等原料加工而成。
Cup wheel is investigated in this paper which includes cutting model of abrasive particle, computer model of face grinding and optimization of technological parameters etc.
本文包括杯形砂轮的磨粒切削模型、计算机模型，以及工艺参数的优化研究等内容。
An experimental research was performed on the abrasive mixed with high pressure water efflux and the choice of parameters in the cutting process.
对高压射流中混入的磨料参数的选择进行了试验研究。
The product structure gradually perfect: ultra-thin cutting piece, stainless steel mill slice, stone grinding slice, big slice, Angle abrasive disc quality obtained the customer common affirmation.
产品结构逐步完善：超薄切割片、不锈钢磨片、石材磨片、大切片、角磨片的质量得到了客户的普遍肯定。
This paper proposed the criteria to select qualified abrasives for imported granite—cutting machines on the bases of abrasive wear mechanisms and the working principle and conditions of the machines.
本文在分析进口锯石机工作原理和工况条件的基础上，根据磨料磨损机理，提出了适于进口锯石机的新型石材锯切砂的选材依据；
Aimed at the bottleneck problem in the spread and application of the abrasive suspension jet technology from abroad, a new technical equipment of abrasive suspension jet cutting was developed.
针对国外磨料浆体射流切割技术在我国推广和应用的瓶颈问题，研制出一种新型的磨料浆体射流切割工艺设备。
Experiment study has been made on abrasive water jet (AWJ) cutting mechanism according to the demand of industrial cutting.
根据工业性切割的需要，对磨料水射流(awj)切割机制进行实验研究。
The high abrasive ability of the titanium carbide was caused by the cutting power of the particles, while that of artificial diamond resulted from a high hardness of the particles.
而碳化钛的高研磨能力是由颗粒的强切削力所致，人造金刚石则由颗粒的高硬度所致。
The abrasive water-jet cutting technology is mainly summarized on the aspects of the characteristic, cutting mechanism, crucial technology, and the influencing factor of cutting effect.
着重从磨料水射流切割技术的特点、切割机理、关键技术以及切割效果的影响因素做了综述。
To meet the occasion that has the requirement of explosion proof, the cold cutting technology of premixed abrasive water jet was proposed to use in the cut of brittle materials such as concretes.
提出在有防爆要求的场合下，利用前混合磨料水射流冷切割技术对混凝土等脆性材料进行切割。
On the basis of analyzing cutting mechanisms of cutters, a linear wearing speed model is established by researching the abrasive law of cutters.
定钻压、定转速条件下的单切削齿磨损速度试验结果表明，切削齿的线磨损模式是正确的。
The technique of abrasive jet cutting in oil well are developed to be used in increasing oil production by abrasive two-phase jet theory.
磨料射流油井割缝增产技术是利用磨料两相射流机理开发出来的用于油田提高油井采收率的一项技术。
Theresult proved, abrasive water jet metal-cutting don't exit heat effect.
试验结果表明，磨料水射流切割无热影响区。
In water jet cutting(WJC) devices, the cutting medium are many kinds of abrasives. There are two types of abrasive mixing methods widely used in present WJC devices: post-mixing and pre-mixing.
前言：在磨料水射流切割设备中，磨料其主要工作介质，磨料与水的混合方式主要有前混合和后混合两种。
Fixed abrasive wire saw is recognized as one of the best methods in cutting large size semiconductor chip and function crystal because of its incomparable advantages.
在大尺寸半导体基片和功能晶体的切割中。固结磨料线锯以无可比拟的优点被认为是最好的切割方法之一。
Exhibit: sand belt, sand paper and abrasive product, diamond sand wheel, Pitch cutting, Black lead cloth, etc.
展品：砂带、纸及及其异型产品，石墨布、脂、瓷砂轮、脂切割片、刚石砂轮等。
The results show that the abrasive wear loss is mainly controlled by micro-cutting and microcracking. The wear resistance may be determined by the combination of strength and toughness.
结果表明，材料的磨料磨损主要由显微切削和显微裂纹两个因素控制，材料的耐磨性由其强度与韧性的配合所决定。
The results show that the abrasive wear loss is mainly controlled by micro-cutting and microcracking. The wear resistance may be determined by the combination of strength and toughness.
结果表明，材料的磨料磨损主要由显微切削和显微裂纹两个因素控制，材料的耐磨性由其强度与韧性的配合所决定。
应用推荐