A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
The profile of cavity photon flux along the flow direction and the total output power has a simplified analysis formula for COIL but no for NCl(a)-I AGIL due to its complexity.
AGIL的体系较为复杂，不能得到光子通量沿流动方向分布和输出功率的简化计算公式。
A simplified method for the dynamic analysis of the structure-foundation interaction of offshore platforms is presented in this paper.
本文提供了一个分析结构——基础耦合响应的简化方法。
A simplified approach of reliability analysis for seismic structures is provided. And an optimality criterion method is presented for the reliability-based optimization.
给出了适用于优化算法的抗震可靠度简化分析方法，提出了一种基于“等可靠度”准则的结构优化方法。
Simplified analysis on a single fiber fin in the duct flow demonstrates that the heat transfer can be enhanced with the increasing length-to-diameter ratio and thermal conductivity ratio.
对单根纤毛肋进行的简化理论分析表明纤毛长径比和肋材与流体的导热系数比越大其强化换热作用越好。
This article devotes a simplified stress analysis method to engineering designers for access to performing stress analysis of such structure steel.
该文提供了一种简化的应力分析方法，便于工程设计人员对此类结构的应力进行分析。
Based on the analysis of heat and mass transfer, a simplified mathematical model describing the falling film crystallization process is developed.
本文在对降膜结晶分离过程进行传热传质分析的基础上，建立了简化数学模型。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
The analysis method USES a simplified version of a mass spectrometer, a tool that can be used to separate and identify molecules in compounds.
这种方法运用简化的质谱仪来分析样本。质谱仪可用于分离和识别化合物中的分子。
A method of analysis of the effect of aeroelasticity on the stability of elastic vehicles by using a simplified mathematical model of unsteady aerodynamic forces is proposed.
而后就简化的非定常气动力数学模型提出了分析气动弹性对飞行器稳定性影响的方法。
A model for simplified second order analysis of the double resistance to lateral force system is built on the basis to transform second order effect into negative stiffness.
为简化双重抗侧力体系二阶分析，将结构的二阶效应转化为结构的负刚度，从而建立分析模型。
A simplified method for analysis of creep effects in steel-concrete simply supported composite beams is presented. The mathematical models of viscoelastic analysis are created.
提出了钢与混凝土简支组合梁的徐变效应简化分析方法，建立了粘弹性分析的数学模型。
Based on the simulation of the gyro attitude errors resulted from above mentioned, a simplified error equation is established and the analysis in complex domain is made.
对由此产生的陀螺姿态角误差进行了仿真分析，并在此基础上建立起与之相应的简化误差方程，对简化误差方程进行了复域分析。
The simplified SSL3 0 basic handshake protocol is analyzed by using a formal analysis method called the approach of the running-mode analysis.
主要使用运行模式法对简化的SSL30基本握手协议进行了形式化分析。
Resorting to a simplified mechanical model, this paper makes a theoretical analysis of the dynamic response of the gantry crane and loading bridge when their their trolleys collide with buffers.
本文用简化的力学模型对龙门起重机和装卸桥小车撞击缓冲器时的动力响应进行理论分析。
Based on the widely adopted simplified model, a new vibration absorption analysis model is established for correctly representing the interaction of suspended floors.
本文在普遍采用的简化模型的基础上，提出了反映悬挂楼层之间相互作用的多段多层悬挂结构减振分析模型。
A simplified analytical expression of maximum single frequency output is obtained by the analysis of a homogeneously broadened four-level system;
通过对四能级均匀加宽激光器单频功率的分析得到最大单频输出功率的简化解析结果；
The motion lag of struck ship has been evaluated by a simplified analytical method based on momentum transfer analysis and calibrated by dynamic fluid-structure coupling F.
本文以理论分析和数值仿真两种方法对该滞后现象进行了研究。
A simplified linear analysis of the helical instability of arc plasmas is given. Explicit analytic results are obtained.
给出了具有抛物形电导率分布的电弧螺旋不稳定性的一个简化线性分析，得到了显式解析解。
A generalized input and output inclusion principle is used to express the multiple redundant control systems so that the analysis and design procedure are simplified.
采用广义输入输出包含原理将多余度控制系统表示为多重包含系统，使之易于分析与设计。
The simplified practical example for homing control system is given. This paper derives a new method for analysis and design of exponential variable parameter control system.
并以自动导引控制系统为例讨论了应用问题，导出对指数变参数系统分析设计的新方法。
A simplified coupling analysis method for elastoplastic consolidation problem of clay under different stress paths is presented.
提出多路径条件下黏土的弹塑性固结问题的简化耦合分析方法。
In this paper, some algorithms for texture analysis of digital pictures are briefly described, and a simplified algorithm of them is presented.
本文简要介绍了对数字图象进行纹理分析的几种算法，并给出了其中一种简便算法。
Based on the analysis of the negative permeability properties of double split-ring-resonator array (SRRA), a simplified structure called single SRRA was proposed and demonstrated.
对双金属环阵列结构产生负磁导率的机理进行了分析，在此基础上，尝试采用单金属环阵列结构来构造负磁导率材料。
In agreement with the bearing deformation, approximate contact analysis is made with a simplified stiffness function formula obtained which is beneficial to computer programming.
与支座变形相一致，进行了接触问题的近似分析，得到了一个便于计算机编程的刚度函数算式。
Based on the analysis of the differential protection of the double winding transformer, the paper presents a simplified ratio restraint algorithms for the three phase, three winding transformer.
在分析双绕组变压器的差动保护算法的基础上，提出了适用于三相三绕组变压器的比率制动式算法，并对判据进行了简化。
The results showed that the simplified method is reasonable, safe, reliable, such as the structural strength analysis providing a numerical basis.
计算结果表明，该简化方法合理、安全、可靠，为该类结构的强度分析提供了数值依据。
Methods the simplified test of normal distribution (method a) and analysis of variance (method b) were adopted to judge if the two testing methods have variation.
方法用正态分布小样本容量的简化检验(A法)和方差检验(B法)来判定两种测定方法所得结果的异同。
Methods the simplified test of normal distribution (method a) and analysis of variance (method b) were adopted to judge if the two testing methods have variation.
方法用正态分布小样本容量的简化检验(A法)和方差检验(B法)来判定两种测定方法所得结果的异同。
应用推荐