The IEEE1394 is a serial bus standard. By providing a high bandwidth, easy to use and low price interface, it connects computer, PC peripherals and consumer multimedia products together.
IEEE1394是一种串行总线标准，它通过提供一个高带宽、易使用和低价格的接口，将电脑与电脑外部设备、各种家用电器连接起来。
Its bus, which became the S-100, was extensible enough that numerous vendors developed CARDS for the 18-slot system (such as serial CARDS and disk controllers), making it a useful computer.
其总线(变成了S- 100)扩展到足够大量供应商为18槽系统开发卡片(如串口卡和磁盘控制器)，并使其成为一台有用的计算机。
The simplest way of getting the data from the Arduino is with the unit connected directly to a host computer Universal Serial Bus (USB) interface, reading the data as if it were a serial connection.
从Arduino获得数据最简单的方式是让此单元直接连接到主机计算机的UniversalSerial Bus (USB)接口，像串行连接那样读取数据。
It boots from the microSD card with no flash memory and hosts new interfaces, including a DB-9 serial connector, integrated 4-port Universal serial Bus (USB) hub, and integrated Ethernet port.
它没有闪存从microsd卡引导，但是有很多新接口，包括一个DB - 9系列的连接器、集成4个端口的UniversalSerial Bus (usb)总线、以及集成的Ethernet端口。
This allows for a mobile development platform where the compressed root file system fits on a standard Universal Serial Bus (USB) memory stick.
这样就有了一个可移动的开发平台，压缩后的根文件系统完全可以放在一个标准usb记忆棒中。
Users connect the glasses to a PC via a 10-foot-long universal serial bus 2.0 cable.
用户可以通过10英尺长的通用的串行总线2.0电缆把眼镜连接到PC机。
A BMC links to a main processor and other on-board elements using a simple serial bus.
BMC利用简单的串行总线与主处理器和板上其他部件相连。
Can bus is a kind of network of the asynchronous serial communication that can effectively support the distributed control and the Real_time and the multi-master control.
CAN总线是一种有效支持分布式控制和实时控制的、多主的异步串行通信网络。
A single microcontroller controls the entire stack of battery monitors via the SPI-compatible serial interface, and it also is the gateway to the main CAN bus.
单个微控制器通过spi兼容的串行接口控制整组电池监视器，该微控制器也是至主CAN总线的网关。
The operation principle of two-stage serial data bus for Shanghai GM Buick GL car was introduced in this paper, a special trouble diagnosis and shooting was also discussed.
介绍了上海通用别克GL型轿车二级串行数据总线的工作原理，论述了其一起数据传输特殊故障的诊断与排除。
The controller area network(CAN) is a high-speed serial bus system with real-time capabilities, widely used in several control systems.
CAN总线是一个具有实时性的高速串行总线系统，它被广泛应用于各种控制系统中。
ICS1523 is a high performance programmable line-lock clock generator with the I2C serial bus interface. User can use it to generate desired line-locked clock by programming it.
ICS1523是一种高性能可编程行同步信号发生器，它带有一个I2C串行总线接口，可以方便地对内部寄存器进行配置，能产生用户需要的同步信号。
USB(Universal Serial Bus) interface is a newly bus interface standard. It has flexible power supply mode, very high transfer rate and plug and play virtue.
接口是一种新兴的总线接口标准，它具有灵活的供电方式、较高的传输速率和即插即用等优点。
This paper gives a serial transmission method which bases on the I2C BUS and its division. Wehave effectively solved the data delay in high speed serial data transmission system.
本文提出了一种基于I2C总线及其分割技术的串行传输方法，可有效解决高速串行传输系统中的数据延迟问题。
It is a kind of cable bus which can process the communications between computer and peripheral equipments. USB is a general serial bus with PC standard.
它是一种可以同时处理计算机与具有USB接口的多种外设之间通信的电缆总线，USB已成为目前PC标准的通用串行总线。
The serial bus can carry multiple channels of data at the same time in a multiplexing signal.
数据的串行总线可以携带多个通道同时在一个多路复用信号。
USB (Universal Serial bus) is a mainstream bus standard of PC peripheral interface, which extends its applications to industrial automatic instruments.
通用串行总线(usb)是目前PC外设接口的主流总线标准，并迅速在工业自动化仪器仪表中得到应用。
Field bus is a kind of serial digital data communication chain way, it links up to basically control in production field and high levels control course in the automation's control equipment.
现场总线是一种串行的数字数据通信链路，它沟通了生产领域的基本控制过程之间以及与更高层次控制过程的自动化控制设备之间的联系。
CAN bus is a serial communication protocol and ADAPTS to bottom layer communication of distributed control system.
CAN总线是一种串行通讯协议，适用于分布式控制系统的底层网络通信。
A design was proposed, which drives PCI bus nic by adopting single chip microcomputer to realize the connection between serial communication equipments and Internet.
给出了一种采用单片机驱动pci总线网卡以实现串行设备与以太网连接的设计方案。
Besides, the paper also improves a serial communication protocol based on RS-485 data bus, and realizes the application.
此外，本文还改善了基于RS- 485总线的串口通信协议，并实现了这种协议的应用程序。
CAN used as the field bus is an opening network for supporting a multiple-master real-time and distributed controlling serial communication.
作为现场总线的CAN，是一种开放式互联网络，用以支持多主实时、分布式控制串行通信。
This paper mainly discuss a system of design of image collect based on universal serial bus 2.0.
本文讨论了一种外置的基于通用串行总线(usb2.0)的图像采集系统。
CAN bus is a serial data communication protocol. It is regarded highly because of its excellent performance, high reliability, flexible design and low price.
CAN总线是一种串行数据通信协议，由于其卓越的性能、极高的可靠性、独特灵活的设计和低廉的价格而越来越受到人们的重视。
Universal serial bus (USB) is a kind of the serial interface buses with high transfer speed. It has such advantages as Plug and Play, being prone to be expanded.
通用串行总线(usb)是一种高传输速率总线接口，它具有即插即用和易于扩展等特点。
Field-bus is a kind of serial link for data communication, or a kind of communication network for connecting intelligent field-bus equipments with automatic system.
现场总线是一种串行数据通信链路，是连接智能现场设备和自动化系统的一种通信网络。
And its hardware circuit and software programming are simple and convenient, so it can economize program code space and CPU running time. It is a sort of standard of serial bus interface used widely.
其硬件电路及软件编程简单、方便，可节省程序代码空间和CPU运行时间，是一种使用广泛的串行总线接口标准。
The board communicate with computer through the Universal Serial Bus(USB) by using CP2101, a highly-integrated USB-to-UART Bridfe Controller, which can realize Pcperpheral's plug & play.
采集卡利用一种高集成度的USB转UART桥接器CP2101芯片实现了通用串行总线（USB）接口方式，可实现计算机外设的即插即用特性。
The paper introduced a kind of trains impulse analyzer based on Universal Serial Bus (USB) where a practical solution was presented.
介绍了一种基于U SB总线的新型智能列车冲动检测仪的设计，提出了一种实用的解决方案。
The paper introduced a kind of trains impulse analyzer based on Universal Serial Bus (USB) where a practical solution was presented.
介绍了一种基于U SB总线的新型智能列车冲动检测仪的设计，提出了一种实用的解决方案。
应用推荐