A finite element program designed for the stress analysis of ribbed shells is presented.
我们编制了用于肋壳结构分析的有限元程序。
SJ MEPLA is a finite element program specially developed to perform static and dynamic calculations of glass structures.
SJMEPLA是专门开发的执行玻璃结构的静态和动态计算的有限元程序。
A finite element program CCGC-1 is compiled to simulate the creep crack growth rate in materials working at elevated temperature.
编制了有限元程序CCGC - 1以模拟计算高温材料蠕变裂纹的扩展。
A finite element program of wall beam structure under elastoplasticity condition is compiled based on the plastic theory and used to test some practical samples.
并基于塑性理论，编制了“墙梁结构弹塑性有限元法计算程序”，对一些算例进行了验算，得到较好的结果。
A method is presented to analyze the behavior of concrete-filled steel tubular (CFST) arch, which considers the material and geometric nonlinear property, and a finite element program.
提出考虑材料与几何双重非线性的钢管混凝土肋拱面内受力的计算方法并编制了有限元程序。
A finite element program of wall beam structure under elastoplasticity condition is compiled based on the plastic theory and used to test some practical samples. The result is perfect.
并基于塑性理论，编制了“墙梁结构弹塑性有限元法计算程序”，对一些算例进行了验算，得到较好的结果。
A computer program is worked out for modification design of helical gears by using Finite Element Method (FEM).
提出了一套斜齿轮修形用的有限元计算程序。
This paper presents a method, based on the finite element, to compute the structural reliability of bias tunnel lining. Authors compile a practical program and give an example.
提出了基于有限单元法求解偏压隧道衬砌结构可靠度的方法，开发了实用计算机程序，并给出实际算例。
A computer program for this finite element algorithm is being developed for both temporal and spatial dependence.
关于这种既适用于时间域，也适用于空间域的有限元素算法的计算机程序，正在设计之中。
Program design: to work out a utility analysis Program is the absolutely necessarily tache of finite element analysis, and also is this discourse's finally aim.
程序编制：编制出实用的分析程序是有限元分析课题必不可少的环节，也是本文的最终目的。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
A simulative calculation was conducted of the natural frequencies of the frame towers using large-scale finite element program ANSYS, and the calculated value was compared with the test value.
利用大型有限单元程序ANSYS对框架塔的自振频率进行了模拟计算，并将计算值与试验值进行了对比。
The result of equivalent section method was less than the results from the finite element program, which demonstrates the former was a conservative approach.
在极限承载力计算中，将有限元法和等效截面法进行了对比，发现等效截面法计算出的结果偏小，说明这是一种较为保守的方法。
Taking a through bridge with rigid suspender and tie-arch for example, the space stability is analyzed by means of finite element program.
以某下承式刚性吊杆系杆拱桥为实例，利用空间有限元程序对其空间稳定性进行分析。
A computer program written by the finite element language is very like a finite element paper or textbook and very easy to understand, modify and maintain.
采用有限元语言编写计算机程序就象书写有限元论文或教科书那样方便和清晰，并很容易修改和维护。
Let this criterion be a subroutine of ABAQUS 'main program and kept the two in real time communication in finite element algorithm.
有限元计算时将断裂判据以子程序形式嵌入ABAQUS主程序并保持两者之间的实时通信。
A plane nonlinear program of damage module is compiled. The FEM program of damage module and conventional finite element module are used to calculate and analyze a mining slop.
编制了损伤模型的平面非线性有限元程序，并采用损伤模型和常规有限元模型的有限元程序对某矿山边坡进行对比计算分析。
A seepage finite element program was developed based on seepage FEM and imaginary elements fixed mesh method.
基于渗流有限元理论和虚单元固定网格法，编制了堤内压盖渗流有限元程序。
By using finite element analysis program, the models for computation of stiffness parameters of a specific structure with a fixed joint surface are developed.
对一个包含固定结合面的具体结构，利用有限元分析程序计算了结合面刚度参数和结合面位置对结构模态的影响。
An isoparametric finite element program of large elastic-plastic strain (LEPS) is used to analyse the necking of a cylindrical bar and a plate specimen under uniaxial tension.
本文用弹塑性大应变问题的等参数有限元分析程序(LEPS程序)，对平板和圆棒试件的颈缩作了较全面的分析。
The dynamics finite element program LS-DYNA3D is employed to simulate the high-explosive explosion experiment in granite, which has a crooked tunnel that is backfilled with concrete stemming.
采用显式动力学有限元程序LS-DYNA3D，对花岗岩介质中带拐弯坑道回填堵塞的化爆试验进行数值模拟。
A modification method based on the combined universal finite element program and mathematic software for finite element model of long span bridge is proposed.
提出一种通用有限元程序和数学软件相结合的大跨度桥梁有限元模型修正方法。
To solve this problem, the nonlinear finite element calculation in parallel with model tests are used to study the expansion water seal, and a modified program is identified accordingly.
为解决此工程难题，应用有限元对伸缩式水封进行非线性模拟计算，同时进行模型试验，研究确定了闸门采用伸缩式水封的改造方案。
To investigate the hysteresis behavior of composite steel frame with PR connection-reinforced concrete infill wall structural systems, a nonlinear finite element program SRCWNP was developed.
为了系统研究半刚接钢框架-RC剪力墙结构的滞回性能，编制了非线性有限元程序SRCWNP。
Based on the theoretical analysis, the finite element analysis program is developed and examined through the analysis of a fixed beam.
在理论分析的基础上，编制了有限元程序，并对固支梁进行了验算。
According to the finite element method for the plane curved members, a program of time-dependent analysis for prestressed concrete curved beam bridges is developed.
用平面曲杆有限元法编写、调试了预应力混凝土曲线架桥的时效分析程序。
Finite element method is used as numerical simulation means and a program used to calculate saturated unsaturated seepage due to surface infiltration is worked out.
采用有限元方法作为数值模拟手段，编制了考虑地表入渗的饱和非饱和渗流有限元计算程序。
Further more, this paper analyzed the wall's stress distributing state by the finite element program, it provides a reference for concept design in the practical engineering.
另外，本文借助有限元程序分析了墙体的应力分布状态，这为实际工程中的概念设计提供一定的参考。
MCSAP program was applied to the finite element analysis for the stress and deformation of a high-speed Gleason spiral bevel gear under centrifugal load.
使用修改移植的MCSAP有限元分析程序对某高速弧齿锥齿轮进行了离心载荷下的变形和应力的分析。
MCSAP program was applied to the finite element analysis for the stress and deformation of a high-speed Gleason spiral bevel gear under centrifugal load.
使用修改移植的MCSAP有限元分析程序对某高速弧齿锥齿轮进行了离心载荷下的变形和应力的分析。
应用推荐