A finite element model for rubber matrix composite structures is developed in this paper.
建立了一个橡胶复合材料结构有限元分析模型。
In this paper, a finite element method is applied to simulate resistivity imaging logging.
作者在本文中利用有限元方法模拟电阻率成象测井。
Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.
采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。
A finite element model of large combined tubular reactor with complicate structure and loads was built up.
对结构和所受载荷都非常复杂的某大型组合管式反应塔建立了有限元模型。
This paper describes a finite element method analysis of an acoustically transparent planar PVDF hydrophone.
本文介绍了一种透声面元PVDF水听器的有限元分析方法。
A finite element method for analyzing vibration mode and natural frequency of tire construction was provided.
提供了一种分析轮胎结构的固有振型和频率的有限元方法。
This paper presents a finite element method of analyzing the secondary forces of prestressed concrete bridge.
本文提出了预应力混凝土桥梁结构弹性工作阶段的有限元分析方法。
A finite element model for nonlinear dynamic analysis of reinforced concrete block shear wall is pointed out.
本文提出了配筋砼砌块剪力墙非线性动力分析有限元模型。
This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
A finite element method is presented for the calculating natural frequency of turbogenerator stator end windings.
本文提出一种计算汽轮发电机定子绕组端部振动固有频率的有限元方法。
A finite element computing model and a simplified computing model for practical engineering purpose are presented.
提出了夹板的有限元计算模型和一个适合工程应用的简化计算模型。
SJ MEPLA is a finite element program specially developed to perform static and dynamic calculations of glass structures.
SJMEPLA是专门开发的执行玻璃结构的静态和动态计算的有限元程序。
This paper presents a finite element model of local damage in creep and provides the threshold strain for damage elements.
建立了蠕变局部损伤法模型，并给出单元进入损伤态的判据和失效的临界拉伸应变条件。
A finite element numerical approximation scheme and an alternating direction finite element approximation scheme are established.
建立了其有限元和交替方向有限元的两种数值逼近格式。
A finite element modeling of SCSP was performed. The distribution of thermal stress of SCSP under temperature cycle was analyzed.
研究了温度循环载荷下叠层芯片封装元件(scsp)的热应力分布情况，建立了SCSP的有限元模型。
The paper describes a finite element simulation technique of the crack growth process in the homogeneous or inhomogeneous solids.
讨论了材料断裂过程的有限元模拟技术。
A finite element method with high accuracy is presented in this paper, which is used to form the finite element difference method.
给出了一种有限元高精度方法，即有限元差分法的一般构造原理。
Combine example on strength and deformation of the forklift, exploited a finite element analyze system of forklift steering bridge.
结合叉车上转向桥强度、变形的算例，开发了一个实用的叉车转向桥有限元分析系统。
Study Design. A finite element analysis-based bone remodeling study in human was conducted in the lumbar spine operated on with pedicle screws.
研究设计：在人体以有限元分析为基础的骨重建的研究已经被运用于椎弓根螺钉固定的腰椎手术。
Then a finite element method for quickly solving elastoplastic contact problems is presented by using quasi-elastic summation and double-iteration.
而后，利用拟弹性叠加、双重迭代给出一种快速解弹塑性接触问题的有限元算法。
A finite element model based U-bending benchmark of NUMISHEET '93 has been used to predict springback with contact evolution between the sheet and dies.
基于NUMISHEET93的U形弯曲标准考题，考虑板材与模具间的接触演变过程，建立了一个有限元模型来预测回弹。
The soil consolidation can be simulated by using a finite element numerical model of fluid-solid coupling of fluid seepage in a deformable porous medium.
针对饱和土固结问题，利用可变形多孔介质中流体渗流的流固耦合有限元数值模型，对该问题进行了数值模拟。
A computer program written by the finite element language is very like a finite element paper or textbook and very easy to understand, modify and maintain.
采用有限元语言编写计算机程序就象书写有限元论文或教科书那样方便和清晰，并很容易修改和维护。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
Air temperature distribution is analyzed with a finite element method. Linear distribution of refractive index is calculated for certain measurement positions.
该文利用有限元方法分析热轧车轮周围空气温度场，计算得到相应测位空气折射率的线形分布规律。
A finite element model of human mandible is developed from ct scan images by the technologies of three-dimensional reconstruction, image processing and meshing.
根据人体下颌骨的螺旋CT扫描图像，利用三维重建、图像处理和网格划分技术，建立了人体下颌骨的三维有限元模型。
A finite element program of wall beam structure under elastoplasticity condition is compiled based on the plastic theory and used to test some practical samples.
并基于塑性理论，编制了“墙梁结构弹塑性有限元法计算程序”，对一些算例进行了验算，得到较好的结果。
A finite element (fe) method for the prediction of the equivalent heat transfer parameters of the composite material with random multi-scale grains was presented.
针对预测多种尺度颗粒随机分布复合材料等效热传导参数的难点，提出了一种多尺度有限元方法。
应用推荐