Design a data collection module with serial port based on microcontroller. The thesis explains the circuit principle and program designing in detail.
设计了一个串口通讯的单片机数据采集模块，文中详细阐述了模块的电路原理和程序设计。
This paper puts forward a method of designing fluid logic circuit according to program characteristics and productive conditions.
本文提出从程序特征及生产条件出发选用流体逻辑回路设计方法。
A program based on the node analysis method which can be used to compute Sine AC-Circuit is described.
文章介绍一个用节点分析法计算正弦交流电路的程序。
Exponentially increasing of the state number of a system causes the combination exploring with the scale of program or circuit increasing.
随着程序或电路规模的增大，状态数目将呈指数增加而引起组合爆炸。
A simple equivalent circuit model of quantum well laser (QW LD) which is derived by QW rate equations and is accomplished in the circuit simulation program SPICE.
给出一个新的量子阱激光器等效电路模型，由量子阱激光器单模速率方程推导得到并在电路模拟程序SPICE中完成。
A set of programs that detects faults in a program or circuit under development.
一组用于检测正在研制中某程序或线路故障的程序。
The characteristics of a TM card and its reading-writing circuit and software program are discussed in detail, and a design of TM card watt-hour meter is introduced in brief.
详细讨论了TM卡的特点及其读写电路和软件程序，并简要介绍了一种TM卡收费电表的设计。
The host includes a start information generation program circuit for generating password generation start information which has not been used in the past.
主机包括开始信息产生程序电路，用来产生过去没有用过的口令产生开始信息。
The design contains the main circuit parameters of the rectifier, drive circuit, measuring circuit and other hardware, and a full software program.
本文设计了该整流器的主电路参数，驱动电路，测量电路等硬件，提出了软件实现的完整方案。
This paper introduces a circuit setting up and displaying the data of timer, counter and data register out of PLC. It gives the ladder-type Patterned program.
介绍了一种对定时器、计数器、数据寄存器的数据进行外部设定并显示的电路，并给出了相应的梯形图程序。
Then a program is developed on the theory of EMCM (equivalent magnetic circuit method) and it is used in the pre-design of the PMSG.
然后根据等效磁路法编制了电磁计算程序，据此进行了电机的初始设计。
On this basis, the realization of the analysis on a computer is given and the calculation program is a set of systematic and complete analytical program and has a powerful circuit applicability.
在此基础上，给出了改进状态变量法的计算机实现方法，其计算程序是一套系统完整的状态变量法分析程序，具有很强的电路适用性。
In this paper, we introduce a humidity controller using wireless data transmission system with multi-probe, and present the unit circuit and the program flow chart.
本文介绍了一种多探头输入利用无线数据进行传输的湿度控制仪，给出了单元电路图和程序流程图。
Through debugging the hardware circuit of the Phase Locked Loop and writing the Single-Chip Processor program, a good performance frequency source is realized.
通过对锁相环硬件电路的调试和编写相关单片机控制程序，实现了一个性能较好的频率源。
The paper introduces a program of high-accuracy digital tachometer based on AT89C52 SCM, and presents the diagram of applied circuit principle and software design.
本文介绍了一种基于AT 89 C52单片机的高精度数字转速计的实现方案。给出了硬件电路原理图和软件设计。
This paper introduces the application of HH204 stepping motor's driver on multi-rate register, presents a circuit and driver program.
介绍HH204步进电机驱动电路在复费率计度器上的应用，给出了硬件电路和驱动程序。
The SPICE2(simulation program with integrated circuit emphasis)polynomial controlled source can be used to realize a number of nonlinear mathematical functions.
利用SPICE（集成电路通用模拟程序）的多项式受控源可以实现多种复杂的非线性数学方程。
A method of judging whether the core is saturated and simulating the output performance of LTD is presented with the combination of PSPICE program and LTD equivalent circuit.
利用LTD等效电路与PSPICE程序相结合，计算了LTD性能，给出判断磁芯是否饱和的简便方法。
Hardware circuit design includes a central processing unit circuit, clock circuit, assembly language software to achieve, including the main program, subroutine, such as set-up time software modules.
硬件电路设计主要包括中央处理单元电路、时钟电路、软件用汇编语言来实现，主要包括主程序、时光设置子程序等软件模块。
In this paper, we introduce briefly a kind of UART COMS chip TL16C550C and provide the hardware circuit between TL16C550C and TMS320VC5402 and the way how to program it.
文中简单介绍了一种UART芯片TL 16c 550c，并给出了它与TMS320 VC 5402连接的硬件电路以及软件编程方法。
The paper introduces an approach of serial communication of PIC16F877 single chip computers with PC and provides a hardware interface circuit and a communication source program.
介绍了PIC16F877单片机与PC机实现串行通信的一种方法，并给出了硬件接口电路及通信源程序。
And its hardware circuit and software programming are simple and convenient, so it can economize program code space and CPU running time. It is a sort of standard of serial bus interface used widely.
其硬件电路及软件编程简单、方便，可节省程序代码空间和CPU运行时间，是一种使用广泛的串行总线接口标准。
The signal flow diagram for FFT, circuit blockdiagram, and program flow chart as well as the test results a…
文中给出了FFT信号流程图、硬件电路框图、程序流程图和试验结果。
So it can be used as a digital storage oscilloscope. The signal flow diagram for FFT, circuit blockdiagram, and program flow chart…
文中给出了FFT信号流程图、硬件电路框图、程序流程图和试验结果。
In order to simplify the periphery circuit and the program of TMS320LF2407A, some complicated tasks are given to MCS_51. The right communication is a guarantee of the system.
在电动机车的工程背景中，为了简化主控芯片TMS320LF2407A硬件上的外围电路以及软件上的程序编写，就把一些实时性要求较低的任务交给MCS_51去完成。
The paper introduces a framework of the signal exchange device, the circuit of CAN bus, the net of CAN bus, and the flow of CAN bus program.
本文介绍了信号转换装置的结构、CAN总线电路、组网，及CAN总线工作的程序流程。
A way of controlling the voice volume in a wide range with program-control amplifier, the hardware circuit and constructing method of software are given.
采用程控放大器对音量进行宽范围控制，提供了具体硬件电路并指出了软件构成方法。
Secondly, on the basis of previous analysis results, this paper makes a emulation program of electromagnetic mechanism dynamic characteristics, combining with the magnetic circuit method.
其次，以前步分析结果为基础，采用“场路混合法”对迎击式交流接触器电磁机构的动特性进行了仿真。
Based on two dimensional MHD mathematical model of nozzle arc, a CAD program is developed for SF6 circuit breaker design.
在建立的喷口电弧二维磁流体动力学数学模型的基础上，开发了SF_6断路器的CAD软件。
Based on two dimensional MHD mathematical model of nozzle arc, a CAD program is developed for SF6 circuit breaker design.
在建立的喷口电弧二维磁流体动力学数学模型的基础上，开发了SF_6断路器的CAD软件。
应用推荐