The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化。
Recently, a new type of welding method (A-TIG welding) calls a great attention all over the world.
近年来,一种新型高效的焊接法——A-TIG焊正引起世界范围内的高度重视。
The application of A-TIG welding in all-position welding for the nuclear electricity pipes welding was studied in this paper.
研究了活性焊接法在核电管道全位置焊接中的应用。
The effect of active flux and arc shrinking in A-TIG welding is studied through detecting arc voltage with variant welding current.
在变动焊接电流下检测电弧电压,考察a - TIG焊电弧收缩及活性剂的影响。
Effects of welding parameters on the penetration of austenitic stainless steel A-TIG weld seam with the home-made active flux were carried out.
利用自制的活性剂,考察了焊接工艺参数对奥氏体不锈钢A-TIG焊焊缝熔深的影响。
The effect of activating fluxes with single component on weld forming during the A-TIG welding of AZ31 magnesium alloy is studied in this paper.
文摘针对AZ31镁合金,研究了在A-TIG焊中单一成分的活性剂和涂敷量对焊缝成形的影响。
The effect of welding parameters such as welding current, welding velocity and welding voltage on A-TIG weld's depth and width has been studied.
研究了焊接电流、焊接速度及焊接电压等焊接工艺参数对A - TIG焊焊缝熔深的影响规律。
The effect of active flux and arc shrinking in A-TIG welding is studied through detecting arc voltage with variant welding current in this paper.
在变动焊接电流下检测电弧电压,考察a - TIG焊电弧收缩及活性剂的影响。
TIG(tungsten inert-gas) welding processes and A-TIG(A activating) processes of TC4 titanium alloy with FT-01 activating flux made in BAMTRI were investigated.
采用北京航空制造工程研究所研制的FT-01钛合金活性焊剂进行了A-TIG焊及常规TIG焊焊接TC4钛合金工艺对比试验。
The experimental results show that the penetration can be significantly increased by activating flux coated wire welding, comparing to conventional TIG welding and A-TIG welding.
试验发现活性焊丝熔深增加效果明显,熔深远大于常规TIG焊和手工涂敷a - TIG焊。
The results show that whether the arc of A-TIG welding shrinks is related with active flux used. The surface active flux still has the effect on weld pool depth even when arc does not shrink.
结果表明,A-TIG焊电弧是否产生收缩与所使用的活性剂有关,即使在电弧未产生收缩情况下,表面活性剂仍然对焊接熔深的增加有较大的作用。
Some experiments, including weld deviation experiment, A-TIG welding experiment with DCSP mode and FBTIG welding experiment, are made to study the mechanism of activating flux improving penetration.
通过焊接偏移试验、直流正接A-TIG焊试验和FBTIG 焊试验研究了活性剂增加熔深的机理。
For AZ31 and AZ61 magnesium alloy, effects of activating fluxes with hybrid component on weld forming in the a - TIG butt joint welding of are studied.
对接实验针对AZ31和AZ61镁合金材料,研究了在A - TIG焊中混合成分的活性剂对焊缝成形的影响。
This paper introduced the design of a TIG welding machine, which is used for six PTP(point to point) assembling welding of the Hydraulic Torque Converter.
介绍了一种用于液力变矩器总成焊接的六点TIG焊专机控制系统。
According to the arc light features of pulsed TIG welding and its effects on vision measurements, a special method of image capturing and controlling is put forward.
根据脉冲tig焊接电弧的弧光特性及其对视觉检测的影响,提出了一种独特的图象采集和控制方法。
And it relates the design about a new high pressure pulse arc starter of TIG welding.
讲述了一种新型TIG焊高压脉冲引弧器的设计。
This article introduces a method of arc initiation and stabilization, which is used in low current DC TIG welding, it analyzes the controlling circuit that realizes these functions.
介绍一种小电流直流tig焊中的引弧及稳弧方法,并对实现此功能的控制电路进行了详细的分析。
The experimental results show that the power source meets the requirements presented by the pulse TIG welding. DC TIG welding and manual arc welding, and is a new many functions power source.
研究结果表明,所研制的焊机可以满足脉冲tig焊、直流tig焊、手工电弧焊三种方法的焊接要求,是一种新型多功能焊机。
A 150a DC TIG welding machine is developed, using specially designed thyristor rectifier and IC control circuit, which is simple, reliable and of high quality.
研制了一种150a直流tig焊机,采用特殊的晶闸管主电路和集成电路控制技术,具有简单、可靠和高性能的特点。
Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.
焊接设备包括自动等离子弧和TIG 表面硬化机械设备。在此只展示少数典型设备。
A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。
A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.
研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。
A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.
对运动电弧作用下脉冲tIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
The power supply of ac TIG welding can be used to weld aluminium and magnesium which surface has a firm oxide layer.
交流TIG焊接电源可用来焊接铝、镁等表面有致密氧化膜的金属。
A current mode zero-voltage and zero-current switching (ZVZCS) inverter TIG welding machine is developed in this paper, which realizes ZVS for the leading leg and ZCS for the lagging leg.
研制了电流模式零电压零电流开关TIG焊机,其超前臂实现了零电压开关,滞后臂实现了零电流开关。
With modular form of the software structure, the calculating problem is designed to simulate the 3-d transient TIG welding thermal process with a moving arc.
采用模块化结构设计,编写了一套适合于模拟运动电弧作用下三维瞬态tig焊接热过程的计算程序。
Based on the study on the analogously controlled and microcomputer controlled power source, a new 8098 single-chip microcomputer controlled welding machine is developed for the pulse TIG welding.
在模拟控制和微机控制技术研究的基础上,开展了8098单片机控制脉冲tig焊机的研制工作。
TIG welding experiments show that the predictions of the model have a good agreement with the experimental observation with respect to weld pool shape.
焊接工艺试验表明,根据该模型计算的焊缝成形与试验测试结果吻合程度良好。
A series of welding process testing showed that using recessed tube-tube sheet, high Cr-Ni welding materials and automatic TIG welding technology could improve the welding quality of tube-tube...
并通过一系列焊接工艺试验,确定采用管子内缩管板和高铬镍焊材及自动脉冲钨极氩弧焊方法,提高了管子管板的焊接质量和可靠性。
A series of welding process testing showed that using recessed tube-tube sheet, high Cr-Ni welding materials and automatic TIG welding technology could improve the welding quality of tube-tube...
并通过一系列焊接工艺试验,确定采用管子内缩管板和高铬镍焊材及自动脉冲钨极氩弧焊方法,提高了管子管板的焊接质量和可靠性。
应用推荐