From photo editing to 3-d imaging to complex data analysis, there are plenty of tasks that simply work better on a PC.
从照片编辑到3d图片再到复杂的数据分析，在PC上才能更好地运行的任务比比皆是。
Nonnatural amino acid 3 (4 thiazolyl) D, L alanine hydrochloride and its four intermediates were synthesized, their structures were detenmined by IR, NMR, elementary analysis and melting point.
合成了非天然氨基酸3- （4 -噻唑基） -D，L-丙氨酸盐酸盐以及三个中间体，其结构分别通过红外光谱、核磁共振、元素分析、熔点等测试手段得到确证。
This paper introduces basic principle about analysis system of surface image of 3 D braiding composite preform.
介绍了三维编织复合材料预制件表面图像检测与纹理分析的基本原理。
By using finite element CFD analysis software POLYFLOW, 3-d transient simulations have been made on the measurement of the five kinds of pin injection screws.
运用基于有限元的C FD分析软件POLYFLOW，对五种销钉注塑螺杆的计量段进行了三维瞬态模拟。
A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.
对官地混凝土重力坝进行了三维静动力线弹性和非线性有限元分析。
The 3-d finite element model of bolt is calculated by the method of contact analysis, and the fatigue strength of bolt is checked.
并采用接触分析法对螺栓的应力应变进行了三维有限元计算，对螺栓的疲劳强度进行了校核。
Then the calibration and depth calculation algorithm are proposed. Base on the analysis, a 3-D digitization system is introduced.
分析了系统中两相机的成像关系，提出了系统定标和深度测量的算法。
An analysis was made on the Zhougongzhai arch dam under basic load combination and overloading of hydraulic pressure by use of 3-d nonlinear finite element method.
用三维非线性有限单元法对周公宅拱坝进行了基本荷载组合下的非线性分析和水压超载分析。
In order to improve the precision, a new method predicting turbine performance by means of quasi 3-d flow analysis is presented.
为了提高涡轮性能预测的精确度，提出了一种应用涡轮叶轮准三元流动分析的预测方法。
Method: Gait initiation of normal subjects in level was observed with human motion analysis system based common CCD and 3-d force platforms.
方法：使用基于CCD和三维测力平台的人体运动分析系统，研究正常人水平地面起步过程的步态特征。
This paper studies 3-d sensitivity analysis in arch dam shape optimization based on FEM with the Improved Semianalytical Method (ISM).
本文针对基于有限元分析的拱坝体形优化，采用改进的半解析法进行三维敏度分析。
Based on the finite element analysis for 3-d electrostatic field in the fuse-contactor, the mathematical model of inverse problem is set up.
本文以真空组合电器三维静电场有限元分析为基础，建立三维静电场边问题的数学模型。
Theoretical analysis shows that near field 3-d range migration imaging technique can reduce computational complexity in much degree by contrast with back propagation algorithm.
理论分析表明：近场三维距离偏移算法与后向投影算法相比，能在较大程度上减少运算量。
The method of dynamic internal heat resource is adopted to deal with the latent heat during FEM analysis of 3-d temperature field of plastics thermoforming in this paper.
对塑料板材热成形过程的三维温度场进行有限元分析时采用动态内部热源的方法对潜热进行了处理。
Conclusions: the 3-d computer assistant measure system can accomplish the analysis and measurement to the tooth wear, and further research in clinical application is required.
结论：该系统能进行牙磨耗图像的三维分析计算，其临床广泛的推广应用还有待于进一步研究。
In this thesis, finite element analysis using software ANSYS was performed to calculate 3-d temperature field of the hot roller.
本文采用大型有限元分析软件A NSYS对热轧辊三维温度场进行分析计算。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model is established, and simulate analysis in all process is completed.
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, under the assumption of point source propagation of waves an approach of 3-d dynamic analysis of seismic response of embankment DAMS is proposed.
本文利用波的点源传播假定，建议了一种计算堤坝地震反应的三维动力分析方法。
A numerical method for the lower bound limit analysis of 3-d structures under multi-loading systems is presented.
本文提出了多组载荷作用下三维结构下限分析的数值方法。
Combined with the stroboscopic holography, the HFR method applied to the quantitative analysis of the 3-d vibration displacement fields of the bridge of violin.
与频闪全息法相结合，对小提琴桥马的三维振动位移场进行定量分析。
In reference to the describing method of the creeping of machine tools, a motion accuracy analysis of a 3-d coordinate measuring machine (CMM) is made.
参考机床爬行的描述方法，对三坐标测量机的运动精度进行了分析。
According to lifting hoist reel tube shell structure and work situation, a 3-d calculated model of tube shell has been established with finite element analysis method.
采用有限元分析方法，根据提升绞车卷筒筒壳的结构和工作情况建立了筒壳的三维计算模型。
According to the analysis of the structure and the loading status of the vehicle scale, the 3-d solid model of the vehicle scale is built.
通过分析汽车衡秤台的结构特性和受载状况，建立汽车衡秤台的三维实体模型。
Among all methods of 3-d profilometry with projecting grating, direct fringe displacement analysis has the fault of low resolution in vertical fringe direction.
在光栅投影三维轮廓术中，直接条纹位移分析法存在着垂直条纹方向分辨率低的缺点。
Spectrum analysis was performed to determine the micro-mechanism of damage evolution of C fiber 3-D braiding composite material.
通过声发射波形信号的频谱分析，研究了碳纤维三维编织复合材料拉伸损伤的细观机理。
By taking impedance locus as an example, an algorithm of generating 3-d vector data and other graphs of 3-d analysis modules for fault analysis in power system are given.
以阻抗轨迹为例给出了三维矢量数据的生成算法及其他多种电力故障分析算法的三维分析模块图例。
Method:A 3-D force platform for detecting the ground reaction forces and a special software for data acquisition, calculation and analysis were developed.
方法：设计三维测力台检测地面反力，开发数据采集、计算和分析的专用计算机软件。
CONCLUSION: at present, 3-d gait analysis system is an advanced system that can assess human gait objectively and quantificationally.
结论：三维步态分析系统是目前较为先进的，能够客观、定量地评定人体步行功能的步态分析系统。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model...
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model...
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
应用推荐