阳极氧化层的硬度越大，复合膜摩擦学性能越好。
The hardness of anodic oxidation layer is higher, the tribological property of composite coating is better.
阳极氧化层的多孔的属性，使产品能够染上任何必要的颜色。
The porous nature of the anodized layer allows the product to be dyed any color that is required.
阳极氧化是一种浓缩的天然氧化层形成的过程，对铝表面。
Anodizing is a process of thickening the natural oxide layer that forms on the surface of aluminum.
介绍了铝上阳极形成的多（微）孔氧化膜的新用途及从铝基底上分离这层膜的技术。
The new applications of porous anodic oxide film on aluminum are reviewed and technology of separating the film from aluminum substrate is described.
研究了在铝合金瓷质阳极氧化膜层表面进行染色、封闭一步处理的新工艺。
This paper studied a new technique for gathering coloration and occlusion to one step on the surface of porcelain anodic oxidation of aluminium alloy.
探讨了影响铸铝阳极氧化染色质量的因素，据此优化工艺，找出得到最佳膜层的方法。
Make an approach to the factors that effect the quality of cast aluminium positive pole oxidized colouring, based on this optimum technology, find out the way of getting the optimum membrane layer.
采用热分解方法制备了混合金属氧化物(MO)层钛阳极。
Mixed metal oxide (MMO) coated titanium anode was prepared by thermal decomposition process.
给出了扩孔处理过程中阳极氧化膜横断面的显微结构变化示意图，并给出了“阻挡层调整”实现多色化的工艺参数。
The sketch map of change on microstructure of anodic oxidation film during the reaming process and the process parameters for obtaining the multi-coloring by blocking layer adjusting were presented.
经x射线衍射分析，纯钛表面经阳极氧化处理后，其表面生成了一层非晶态的氧化钛薄膜，并且钛晶体的各个表面沿不同结晶方向的腐蚀速率不相同。
XRD results indicate that amorphous titanium oxide film is formed on the surface after anodic oxidation, and corrosion rates of titanium crystal vary along different crystalline orientation.
采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池s OF C阳极层。
Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper.
微弧氧化陶瓷层的耐蚀性优于阳极氧化和铬化处理膜层的耐蚀性。
The corrosion resistance of micro arc oxidation ceramic coating is better than the corrosion resistance of chromate and anode coating.
研究了铝阳极氧化多孔膜层界面电性能与溶液介质组分的关系。
The relationship between the electrolytic composition and the interfacial electric characteristics of the porous membrane of anodized aluminum was investigated.
阳极氧化加复合的较高温度的热氧化将得到粗糙、并分布着许多凹坑的转化膜层。
Anodizing with thermal oxidizing at higher temperature will get rough films with a many hollow.
结果表明，在抑制阳极发生弧光放电的状态下，镁合金表面可以沉积一层致密的氧化厚膜层，该膜层具有较高的硬度和优良的耐蚀性能。
The results show that a compact oxidation film on surface of magnesium alloy can be deposited under micro-arc restrained, which is harder and more resistant to acid and alkali.
将超声波应用于铝的阳极氧化处理，研究了超声波对阳极氧化特性曲线、电解工艺参数和膜层形貌的影响。
The ultrasonic technics was applied to anode oxidation of aluminum. The influences of ultrasonic on anode oxidation curves, electrolytic process parameters and oxide film's morphology were studied.
一种属于材料技术领域的具有厚阻挡层的阳极氧化铝薄膜的制备方法。
A preparation method of anodic aluminum oxide film with thick barrier layer is provided, which belongs to the field of material technology.
结果表明：阳极氧化膜因内外表面受到电解液的腐蚀程度不同而表现为氧化膜的硬度自膜层表面到基体逐渐升高。
The results showed that the hardness of oxide films increased from the surface to the substrate, because electrolyte corrosion between the internal and external surfaces was different.
固溶工艺的改变对阳极氧化膜的厚度均匀性无显著影响，氧化膜自身的成分结构决定了其膜层厚度的均匀性。
The change of heat treatment had no obvious effect on the uniformity of thickness, which was detected by the composition structure of the films.
固溶工艺的改变对阳极氧化膜的厚度均匀性无显著影响，氧化膜自身的成分结构决定了其膜层厚度的均匀性。
The change of heat treatment had no obvious effect on the uniformity of thickness, which was detected by the composition structure of the films.
应用推荐