含钛的钴铬合金用来制作这个支架。
A cobalt chromium alloy with titanium was used for the fabrication of the framework.
硅锰铬合金、炉料矿石、富锰渣的生产销售。
Guimeng chromium alloy, furnace charge ores, manganese residue rich production sales.
它们身体两侧看起来就像压扁铬合金和钢铁；
目的研制用于研抛钴铬合金铸件的超声波研抛仪。
Objective To develop the dental ultrasonic polishing instrument used in polishing chromium cobalt castings.
所有抛光金属表面，像铬合金、铝、黄铜、不锈钢等。
All finished metal surfaces, such as chrome, aluminum, brass, stainless, etc.
介绍了铜铬合金的性能、应用及该材料现有的制备方法。
This paper introduces the performance, applications and existing producing methods of Cu- Cr alloy.
本研究为钴铬合金的回收再利用提供了可靠的理论依据。
Our study provide valuable basis of the theory for recovering and using Co-Cr alloy.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
目的：探讨空气环境对多次铸造的钴铬合金机械性能的影响。
Objective: To investigate the effect of recasting on physical properties of a cobalt-chromium alloy in air environment.
Chrominium：产生带光辉和火花的铬合金logo。
铬合金：用一块蘸有伏特加的软抹布擦洗，然后它就会再现光芒。
目的：研究钴铬合金铸造卡环的弹性形变限度及其相应卡抱力。
Objective: the aim of this study was to investigate the elastic deformation limit and relevant enclasp force of cobalt-chromium alloy cast clasps.
由于高铬合金任性较差，在没有锤架支撑的情况下容易发生断裂。
Because of high chromium alloy willfulness is poorer, in no hammer under the condition of skid support to happening ruptures.
目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。
Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.
本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions.
本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions.
目的比较不同包埋材料和包埋方法对铸造钴铬合金全冠收缩的影响。
Objective To compare the influence of different investment materials and methods on the cast shrinkage of full crowns made of Co-Cr alloys.
该打火机是高度磨光铬合金抛光的，或者是白色的带有铬合金喷嘴。
The lighters are finished in high-polish chrome or white with a chrome nozzle.
制造：工业硅、金属镁、电石、高碳铬铁、硅铬合金、中低微碳铬铁。
Manufacturing: industrial silicon, metal magnesium, calcium carbide, high - carbon ferrochrome, silicon chromium alloys, low carbon ferrochrome China.
制造：工业硅、金属镁、电石、高碳铬铁、硅铬合金、中低微碳铬铁。
Manufacturing: industrial silicon, metal magnesium, calcium carbide, high-carbon ferrochrome, silicon chromium alloys, low carbon ferrochrome China.
本文对钴铬合金铸后在金相组织、硬度、抗腐蚀性能等方面进行研究。
We studied the metal tissue, hardness, resistance of Co-Cr alloy after casting.
本文介绍了使用硅铁代替硅铬合金作还原剂，冶炼低碳铬铁的工艺方法。
The process of smelting low carbon ferrochromium using ferrosilicon as reducer instead of silicochromium alloy is introduced.
结论：在所有烤瓷程序结束后，应将钴铬合金支架进行彻底打磨、抛光。
Objective:To investigate the effect of porcelain bake cycles on oxide layer formed on cobalt-chromium alloy surface.
文中讨论了这种现象的原因以及硫化层分层对铁铬合金硫化行为的影响。
The reasons for this phenomenon and the influence of the sulfide scale demixing on the sulfidation process of Fe-Cr alloys have been discussed.
与稀土高铬镍氮相比，成本降低60%，与钨铬合金相比，成本降低70%。
Compared to rare earth high Cr-Ni-N, cost falls 60%; Compared to W-Cr alloy, cost falls 70%.
发动机湾一尘不染和抛光铬合金和光线，所以你需要太阳镜时，着眼于细节。
The engine bay is spotless and the polished alloy and chrome shines so much that you need sunglasses when looking at the detail.
该存储衣柜组合包括架服装架，2铬合金3点锁定系统，全铰链焊接钢结构。
Storage-Wardrobe combination cabinets consists of shelves garment bar, 2 chrome handles with 3 point locking system, and all welded steel construction with concealed hinges.
目的：评价牙周植骨术联合夹板式钴铬合金烤瓷联冠保留末端松动牙的临床疗效。
Objective: to evaluate the effects of bone graft combined porcelain fused to Co-Cr metal crowns splint treatment for conserving liven abutment.
目的：测试激光焊接铁铬钼软磁合金与钴铬合金的机械性能，为临床应用提供参考。
Objective: to explore the mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy so as to give reference for clinical work.
通过净化合金液，细化基体晶粒，细化碳化物可使铬合金白口铸铁的冲击韧性提高。
By purifying the alloy melt, refining matrix grain and carbide, it is possible to increase the impact toughness of the Cr-alloyed white cast iron.
应用推荐