合金钢的性质取决于其所含有的除碳以外的一种或多种元素,如镍、铬、锰、钼、钨、硅、钒和铜。
Alloy steel owe their properties to the presence of one or more elements other than carbon, namely nickel, chromium, manganese, molybdenum, tungsten, silicon, vanadium, and copper.
合金钢:指钢中含有铁,碳,以及镍、铬、钼等一种或多种其他的合金元素。
ALLOY steel: a steel containing iron and carbide plus one or more other metals such as nickel, chromium, or molybdenum.
硅和钼、钨、铬等分离,有进步抗腐蚀性和抗氧化的作用,可制造耐热钢。
Silicon and molybdenum, tungsten, chromium and other separation, has improved corrosion resistance and anti-oxidation effect, can produce heat-resistant steel.
钢最常用的添加元素有锰、镍,钼和铬。
The alloying elements used most often in steels are manganese, nickel, molybdenum, and chromium.
成功研制了中速磨磨辊新材料——锰钼复合高铬铸铁。
The new material for medium speed grinding roll-MnMo compound high chromium cast iron has been developed successfully.
介绍了应用DV - 4光电光谱仪,仅用一种测定条件,测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
硬化,精密研磨,在车头铬钼齿轮。
Hardened, precision ground, chrome molybdenum gears in headstock.
结果表明:碳含量较低时,仅形成钒的碳化物,铬、钼元素主要固溶于钒的碳化物中。
The results show that only vanadium carbides form at the low carbon content, and Cr and Mo element mainly dissolves into vanadium carbides.
采用人工合成高纯度的羟基磷灰石粉末,喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy.
目的对135例急性心肌梗死患者血清中的铬、钴、镍、钒、钼的含量检测并与对照组比较。
Objective To compare chromium, cobalt, nickel, vanadium and molybdenum contents in serum of 135 patients suffering from acute myocardial infarction with that of control group.
介绍了铬钼激冷铸铁在实际生产中的应用,对铬钼激冷铸铁和镍铬激冷铸铁性能进行了比较。
This paper introduced the application of chrom Mo cold cast iron at actual production and compared the function of chrom Mo cold cast iron with Ni chrom cold cast iron.
化学法测定胫骨钙和磷含量,原子吸收分光光度法测定铁、锌、镁、锰、铜、钴、铬和钼等微量元素的含量。
The contents of calcium and phosphate in tibias were determined by chemical analysis and the trace elements were detected by atom absorption spectrophotometer.
试验结果表明,使用该材料制作的牙板其使用寿命与高铬钼铸铁牙板相当,且生产成本低。
The result of industrial experiment had shown that jaw made of this material last equally with that of high Cr Mo cast iron, and this material is low_cost.
结果表明:铬和钼可提高钢的再结晶温度。
The results showed that the recrystallization temperature is increased by alloying chromium and molybdenum.
在粗轧阶段选用了合金半钢材料轧辊,在精轧阶段选用了铬钼无限冷硬铸铁材料的轧辊。
In the process of rough rolling, the alloy semisteel was chosen, and the unlimited chrome and molybdenum chilled iron roll material was used in the process of fine rolling.
这些元素是:镍、铬、钼。
在铬钼型催化剂上研究了甲苯加氢脱甲基反应动力学。
The kinetics of hydrodealkylation of toluene into benzene on CrMo catalyst was studied.
该舱区采用了4130铬钼(铬钼)焊接钢管架顶部大会。
The cabin area utilizes a 4130 chrome-moly (chromium-molybdenum) welded steel tube frame top assembly.
氧化膜中铬、镍、钼等主要元素氧化成离子的比例较高,铬尤为明显。
The oxide percentage of major metal elements such as Cr, Ni and Mo were higher, especially Cr.
研究结果表明:硼对铸态高铬铸铁力学性能有显著影响,而钼和铜对其性能影响不大。
The results showed that boron has a notable influence on the mechanical properties of high chromium cast iron at as-cast and molybdenum and copper has little influence on the mechanical properties.
高铬钼抗磨合金本质为亚共晶型高合金白口铸铁。
High chromium-Molybdonum wear-resistant alloys are hypoeutectic white cast iron.
新型模具钢材料SKD61钢是一种含硅、铬、钼和钒的中合金热作模具钢。
The new-style of SKD61 steel is a medium alloy hot-mold steel.
目的研究一种能同时用于烤瓷修复和可摘局部义齿铸造支架的新型钴铬钼合金。
Objective to investigate a kind of Co-Cr-Mo alloys used for both porcelain fused to metal (PFM) restorations and casting framework of removable partial dentures.
目的:测试激光焊接铁铬钼软磁合金与钴铬合金的机械性能,为临床应用提供参考。
Objective: to explore the mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy so as to give reference for clinical work.
提出用稀土铬锰硅合金代替昂贵的稀土钼铁合金生产高性能的柴油机缸体。
It is proposed rare earth chrome-manganese-silicon alloy can replace the costly rare earth ferro-molybdenum alloy to produce diesel engine cylinder with high property.
组成合金的元素有钼、钨、铬、硼和碳。
The alloying elements are molybdenum, tungsten, chromium, boron, and carbon.
通过快速模拟磨损试验发现铌铸铁油环耐磨性能比铬钼铜油环提高87.3%,并降低了油环的制造成本。
The results also find that wear resistance of niobium cast iron oil ring is 87.3% higher than that of CrMoCu alloy cast iron along with the cost reduction for niobium cast iron oil ring.
地下蕴藏铅、锌、冰晶石、铬、煤、钨、钼、铁、镍、铀和石油等资源,其中冰晶石已基本采完。
Underground deposits of lead, zinc, cryolite, chromium, coal, tungsten, molybdenum, iron, nickel, uranium and oil resources, which has basically taken cryolite end.
为此,研制了一种机械夹固式高铬钼抗磨铸铁组合导板。
Therefore, a kind of mechanically fixed assemble guiding plate made of hi-Cr-Mo wear resistant cast iron was developed.
为此,研制了一种机械夹固式高铬钼抗磨铸铁组合导板。
Therefore, a kind of mechanically fixed assemble guiding plate made of hi-Cr-Mo wear resistant cast iron was developed.
应用推荐