硬件上使用i- 7188eg型嵌入式通讯控制器。
本文介绍了LN82 5 30串行通讯控制器的主要功能，版图设计，制造工艺。
This paper introduces the main functions, layout design and technology of LN82530 Serial Communications Controller(SCC).
本文设计了一种新的基于以太网的异构数控系统联网方案，并且设计出用于联网通讯的通讯控制器。
A new networking project based on Ethernet for different numerical control systems and communication controller for network communication are designed in this paper.
该系统应用了MCS - 51系列的单片机，研制出通讯控制器和加油控制机，主机通过串行通信协议来对加油进行控制和监测。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
蓝牙规范包含了一个符合标准的接口定义(主机控制器接口)，它适用于蓝牙通讯模块的硬件部分。
The Bluetooth specification includes the definition of a standardised interface (the Host Controller interface) to the hardware of a Bluetooth communications module.
一种基站天线，有几个部分。长而垂直的是与手机通讯的部分，而圆的则是通过控制器与基站链接。
An antenna of a base station, it has some sectors. The vertical communicates with mobile phones, the round one connects the base station with a controller.
长而垂直的是与手机通讯的部分，而圆的则是通过控制器与基站链接。
The vertical communicates with mobile phones, the round one connects the base station with a controller.
本文介绍了以TMS320 LF 2407a为核心控制器的步进电机自动升降速控制系统与PC机的通讯及程序设计方法。
It's introduced that the controlling system in raising and reducing speed of stepper motor that is based on core controller, TMS320LF2407A, communicates with PC, as well as the method of programming.
阐述了控制网络的结构，系统的管理，所控制设备与控制器间的通讯及人机界面。
The topology of control network, system management, communication between control equipment and CPU, human machine interface (HMI) were clarified.
所有可编程控制器(plc)和处理器应采用植入目标链接(ole)的过程控制(opc)协议，以便与中央控制和数据处理系统的通讯。
All Programmable Logic Controllers (PLC) and Processors shall use Object Link Embedded (OLE) process control (OPC) protocol to facilitate communication to a central control and data processing system.
分别说明了系统的探测器、区域控制器和集中控制器的设计，还有系统的通讯方式，软件的设计思想以及系统的探测算法。
And discuss the detector, local controller and remote controller of the system, the communication mode of the system, the thinking of software design and the arithmetic of the detector in detail.
同时还进行了可编程序控制器扫描周期与通讯速率和稳定性的关联性研究。
Meanwhile, research about the relationship between scan circle of programmable logic controller and communication performance has been put up.
本文以主要的篇幅来介绍人机界面组态软件和控制器之间通讯的设计和开发过程。
What is mostly discussed in this paper is how the control system communicated with HMI configuration software.
主控机通过I/O控制等离子焊机，采用RS232与机器人控制器通讯。
Main controller adopted RS232 to communicate with robot controller through I/O regulate plasma quenching welder.
通过控制器、参数检测、通讯管理机的工作说明系统的工作原理。
The working principle of the system is described through the introduction of the controller, parameter detection and communication management computer.
介绍了现场CAN总线通讯以及在同步发电机励磁控制系统中的运用，并具体给出了利用AT 89 C52单片机和CAN控制器sJA 1000实现CAN接点通信的方法。
The scene CAN bus communication and its application to excitation system of synchronous generator was introduced, and the use of SBC AT89C52 and controller SJA1000 to realize junction communication.
方法：应用蓝牙模块、80c 552微控制器和RS- 232接口组成了医院导诊服务机器人的通讯系统。
Method: the communication system in the service robot side includes80C552micro-controller, bluetooth module and RS-232interface.
在该生产线的控制系统中，控制计算机与可编程控制器的通讯具有非常重要的作用。
Communication between computer and programmable controller plays a very import role in the control system of Product Line.
本文介绍了由可编程序控制器（EX—100）和IBM系列微机经通讯联网所构成的小型集散控制系统的设计。
The design of a small distributed control system , which consists of programmable controller (EX-100)and IBM series microcomputer by commnucation and network has been introduced.
该接口也可以用于和其他控制器的快速通讯(同步串行)。
This interface can be also be used for a fast communication (synchronous serial) with other controllers.
这种通讯协议和电容式触摸控制器的整合也使得电子工程师非常容易建立一个集成的控制面板。
Such integration of communication protocols with capacitive touch controllers also enables electronic engineers to easily create an integrated control panel.
本文介绍了变频空调控制器遥控系统的设计，通过有效的编码方式及接收滤波使红外通讯准确无误。
In this paper, a remote control system for DC-INVERTER air conditioner is introduced. By means of efficient coding and filtering, the infrared communication is robust.
设计了一种带有RS- 485接口的交流变频控制器，它硬件接口简单，通讯可靠性高。
A variable frequency inverter with a RS-485bus communication interface is designed. It has the advantages of simple hardware interface and high reliability of communication.
如果您要尝试使用测试控制器、测试代理程序或用户端搭配与通讯埠设定冲突的其他某些软体，这可能就是必要的动作。
This might be necessary if you are trying to use the test controller, the test agent, or the client together with some other software that conflicts with the port Settings.
本设计实现了在MIC总线冗余系统中主控制器与从控制器间的数据通讯。
This design realizes the data communication between the main controller and accessary controller in MIC bus redundancy system.
介绍了以太网控制器芯片RTL8019AS，并给出了单片机控制RTL8019AS实现以太网通讯硬件电路的实现方法；
Ethernet controller RTL8019AS is introduced, and a method of single-chip computer controlling RTL8019AS to achieve ethernet communication is gived;
无线收发模块是实现信息无线传输的关键部件，通过AT指令与计算机和微控制器通讯，电表数据以短信息方式传输。
Mscomm Control of Microsoft is used to perform serial communication and PDU(Protrocol pescription unit) model short message is sent based on AT instruction.
典型产品有：智能广播服务器、智能数字控制器、数字音视频处理设备、无线通讯模块、人体检测系统等。
The typical products are: server of intelligent broadcasting, intelligent digital controller, digital audio processing units, wireless communication parts, human inspection system.
该总线桥是某型协调控制器系统的通讯核心，实现了系统下层的背板总线、背板总线管理器与上位机epp并口之间的协议转换以及通讯仲裁功能。
This bridge is the core of communication of the controller system, it connects the bottom level backplane bus, backplane bus controller, and PC EPP parallel port.
该总线桥是某型协调控制器系统的通讯核心，实现了系统下层的背板总线、背板总线管理器与上位机epp并口之间的协议转换以及通讯仲裁功能。
This bridge is the core of communication of the controller system, it connects the bottom level backplane bus, backplane bus controller, and PC EPP parallel port.
应用推荐