进行钢管舞的课程不仅可以增进你的健康，但同时你真的能从自己的世界走出来。
Not only do pole dancing classes improve your fitness, but you really come out of your shell.
在浅覆盖层花岗岩地区进行钢管桩施工，存在易偏位、桩尖易卷口和进度慢等技术难题。
When installing steel tubular piles in regions where granite is shallowly overburdened, the piles are easy to deviate and the pile tip is easy to warp, resulting in slow driving.
文章简要介绍了钢管的腐蚀损失和采用非金属材料涂层来进行钢管的腐蚀控制以及涂层钢管的迅速发展趋势。
The paper briefly introduces the corrosion loss of steel pipes, how to use nonmetallic coating materials to control the corrosion of pipes and the rapid development tendency of coated steel pipes.
结果表明， 基于人工 神经 网络进行钢管销售预测，可以较好反应出销售量的变化趋势，得到更为精确的预测结果。
The findings show that the ANN based sales forecasting can satisfactorily capture fluctuations in the sales volume and achieve higher accuracy in forecasting results.
为使厂内制作的钢管桁架各构件满足设计要求，保证现场顺利拼接，借助计算机模型进行钢管桁架空间圆弧的放样和大直径钢管的火焰加工、厂内预组装；
Following sequences were done by SCK in order to keep shop fabricated steel tube trusses and other parts meet with the requirement of design and site assembly.
来自波斯湾底部的甲烷气体在未完全燃烧后，经过那些像意大利面缠绕在一起的钢管来进行过滤。
Methane from the bottom of the Persian Gulf is part-combusted and filtered in a spaghetti-like tangle of steel pipes.
资深无缝钢管专家指出，铁矿石进口资质的颁发可用公开透明的方式进行，比如竞拍。
Seamless steel pipe, senior experts have pointed out that iron ore import qualified awarded can be used to conduct open and transparent manner, such as auction.
本文对扣件式钢管脚手架杆件接头型式问题，从承载能力，受荷变形方面进行了试验和分析。
This article discusses the joint-types of buckle-type steel tubular scaffold, and analyzes the experiments with load-bearing capacity and load deformation.
介绍了钢管接触法超声波探伤缺陷定位方法——手指蘸油触摸法，分析了利用此种方法进行缺陷定位的理论依据。
The author introduces a pipe defect locating method by contact type ultrasonic detection — finger oil dipping touching method and analyses the theoretical basis of defect locating by this method.
采用空间杆系计算模型对包括单根钢管拱肋吊装合龙在内的施工和运营阶段进行稳定性分析。
D FEM analysis model is adopted for the stability analysis in construction including hoisting and closing single steel tubular arch rib and service stages respectively.
介绍了电站锅炉用钢管进行性能评定的必要性及评定情况，并指出今后的任务是积极开发新的锅炉管品种。
The necessity of evaluating the properties of power plant boiler tubes is explained, and the results obtained, simultaneously stressing that the job ahead is to develop new types of boiler tubes.
对X65钢级板卷以及其制成钢管的同方向拉伸性能进行了试验。
A test was made of the concurrent tension performance of X65 rolled sheet and the pipe made of it.
本文结合上海宝钢景点创作，对钢管与钢板两种材料的艺术造型进行了探讨。
This pa-per is investig ted into the plastic art from both steel tubes and plates in the creation ofBaoShan steel plant scenic sports.
应用该方法，以长细比、偏心率和初应力度为主要参数对有初应力的钢管混凝土偏压构件进行了受力性能分析。
This finite element method is employed to analyze the behavior of eccentrically loaded CFST columns, taking initial stress degree, slenderness ratio, and eccentric ratio as the parameters.
沿着砖墙的承重钢管结构被重新粉刷，冷阴极照明系统也被进行了改造。
The supporting tubular steel frame was repainted, along with the brick walls, and the cold-cathode lighting system was revamped.
为了建立钢管混凝土叠合柱的轴压计算公式，进行了18个叠合柱试件的轴压试验。
In order to establish the axial compressive strength formula for CFST composite columns, axial compressive loading tests of 18 specimens have been carried out.
其基本建筑构件为镀锌钢管、墙体、楼板、屋面的结构隔热金属板，可与传统的内外饰面进行定制。
The basic building components are galvanized tube steel for the base, structural insulated metal panel for walls, floor and roof and can be customized with conventional interior and exterior finishes.
因此，对钢管桩的沉桩施工工艺进行分析和研究就有了现实意义。
Therefore, the pile of steel pipe piles of construction technology and research have a practical significance.
进行了钢管混凝土格构柱偏心受压试验，试验参数为长细比。
Eccentrically loaded concrete filled steel tubular (CFST) laced columns were tested with slenderness ratio as main experimental parameter.
倒棱机是一种专用机床，主要用于对钢管端部进行平头及倒棱加工处理。
The Chamfering machine is a kind of special machine that mainly used to chamfer the end of pipe & tube.
本文阐述了用电磁超声技术探测钢管两端盲区进行的试验，并作了分析与探讨。
This article introduces, discusses and analyzes the test of Elaectro-magnetic technology for the inspection of the pipe end blind area.
对利用外粘钢板加固的钢管柱承载力进行试验研究，测定了不同加固方法对其承载力的影响。
The influence on the bearing capacity of steel pipe column reinforced by different method with sticking steel plate is investigated by test.
在垂直开挖地段布置了微型钢管桩进行超前支护。
Minitype steel pipe piles are installed for advance support in vertical digging segment.
在地下向上进行竖向钢管顶升，其顶升反力对支座加强提出了较高的要求，出土、止水也是难题。
When steel pipe is vertically jacking from underground, its counteraction requires more on the strengthening of bearing support.
利用落锤式冲击试验机对两端固定不同壁厚钢管混凝土构件进行了侧向冲击实验。
The impact experiments of concrete filled steel tubes with fixed-ends were carried out on the drop hammer test machine.
通过对某建筑物不均匀沉降原因的分析，采用微型钢管桩进行桩基础加固，效果较好。
Base on the analysis of reason for differential settlement of certain building, the micro steel tube piles are used to consolidate it, and the result is fine.
对钢管柱节点的设计进行了讨论，使其在实际施工中更具可实施性。
The design of the steel tubular column joints is also discussed, which makes it more operable in actual construction.
建于深厚软土上的某铁塔因基础周边不均匀填土后产生了严重的不均匀沉降，经采用顶压法和掏土法对构筑物进行综合促沉纠偏，同时采用钢管桩法加固处理，实践表明效果良好。
Using the method of top pressure and out soil promoted a comprehensive rectifying deviation to the structure, and using of steel pipe pile method reinforced the base of the tower.
建于深厚软土上的某铁塔因基础周边不均匀填土后产生了严重的不均匀沉降，经采用顶压法和掏土法对构筑物进行综合促沉纠偏，同时采用钢管桩法加固处理，实践表明效果良好。
Using the method of top pressure and out soil promoted a comprehensive rectifying deviation to the structure, and using of steel pipe pile method reinforced the base of the tower.
应用推荐