这些层的对齐优选在不必沉积超尺寸的对齐结构的情况下实现。
Alignment of such layers is preferably accomplished without having to deposit oversized alignment features.
滤液回收水以及旋流器分离下来超尺寸的物流也进入磨机系统，研碎的石灰石和回收水一起混合成新鲜浆液。
Reclaim water and oversize slurry particles from the classifiers are also fed into the ball mill. In the mill, the crushed limestone and reclaim water mix together to form fresh limestone slurry.
今年在CES展会上看到的超微投影仪是种小尺寸的便携投影仪，肯定将创造新的移动应用。
Pico projectors - the tiny portable projectors we saw being introduced at this year's CES - will enable new mobile use cases.
修复：能被肉眼观察到的或尺寸超差但能被修复的产品。
Repair: Product that is either visually or dimensionally out of tolerance but which can be repaired.
废品：目测不合格或尺寸超差并且无法修复的产品；无法达到图纸公差要求的产品。
SCRAP : When product that is either visually or dimensionally out of tolerance and can not be repaired; product that does not conform to blueprint tolerances.
连系起来。根据辐射场在晶体中分布与超快脉冲群速度失配，还给出了探测器制作的尺寸要求。
Taking into account of the distribution of the field and group velocity mismatch we also give the optimized size of the new detector.
马丁：嗯，如果你是模特儿，超小尺寸就是我们最大的尺码。如果不是，那么加大尺寸就是最大的尺码。
Marty: Well if you were a model extra-small is as big as we go. If not, then extra large is the biggest size.
分析了在横列式轧机轧制大规格热轧带肋钢筋时头部葫芦状尺寸超差的产生原因，通过改进轴承座结构，有效地解决了这一问题。
The causes of the head size over tolerance of large size hot rolled ribbed bars are analyzed. By improving the structure bearing bracket, this problem was resolved well.
介绍了半导体超细粒子的概念、结构及特性，主要是包括量子尺寸效应、体积效应、表面效应；
This thesis introduces the concept, structure and properties of semiconductor ultrafine particle (SUFP), including quantum-size effect, surface effect and volume effect et, al.
在超小功率金卤灯生产中，由于受其体积限制，各种尺寸尤其是电弧管泡壳两侧缩颈处的内径测量一直是比较困难的。
On the producing process of the miniature metal halide lamp, due to its bulk, the measurement of its dimensions especially the inside diameter of the necks of the electric arc tube is very difficult.
超细材料所具有的表面效应、小尺寸效应、量子效应等独特性能使其在许多方面有着广阔的应用前景。
The unique characteristics of micro-size materials such as surface trait, the little size and quantum effects, make them have a wide application prospect in many aspects.
本部分主要介绍表面皱皮（积碳）、呛火、气孔、尺寸超差及变形等缺陷的产生原因和防止方法。
The reason and prevention of four kinds defects including surface wrinkled skin (carbon built-up), chock, blow hole, deformation, was introduced in this part of the article.
介绍了金属筛超大网孔尺寸及超差比例的激光在线检测方法。
A laser on-line measuring method for over-size and over-percentage apertures of wire sieves is described.
结果表明，BP神经网络用于材料超塑性变形后的力学性能及晶粒尺寸预测是可行的，其预测误差小于7%。
The results show that BP artificial neural network can be used in predicting mechanical properties and grain size of materials after superplastic forming and its predicting error is less than 7%.
介绍了江南牌HN710型超微型汽车的主要尺寸、参数、性能及结构特点。
The principal dimentions, parameters, performance, and structural features of the Jiang Nan model HN710 minicar are outlined in this paper.
本文分析了由于温度的波动及初始晶粒尺寸差异对超塑性拉伸过程的影响。
In this paper, the effects of the temperature fluctuation and the initial grain size inhomogeneity on the deformation process in a superplastic tensile test have been analysed.
多微型蜘蛛的独特定位为需要快速移动，最低功耗和超小外形尺寸，从可穿戴设备到无人机应用。
The Multi Micro Spider is uniquely positioned for applications that require quick movement, minimal power consumption and ultra-small form factors, ranging from wearables to drones.
从压力试验，塑性失效理论和自增强处理的角度提出以同尺寸单层容器的初始屈服压力作为超压处理压力。
Initial yield pressure of monolayered cylinder with the same size was considered as the SPT pressure, based on the analysis among pressure test, plastic fault theory and self enhancement treatment.
组委会有权拒绝与作品信息不符，如超尺寸及重量、有噪音、散发有害气体、漏液、无法运输、无法布展等，或被认为对观众有危险的作品。
Organizing Committee have the right to refuse the works which information not match, such as super-size and weight, noisy, harmful gases, leakage or any considered dangerous to the audience.
而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。
Other causes include the out - of - tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non - working side.
行星式球磨机可以用于超细磨矿。磨机的结构尺寸一旦确定，磨球脱离筒壁的临界转速脱离点位置则不会改变。
The planetary mill can be used for the ultrafine comminution, when the mechanism size of the mill is determined, the escaping position of the critical speed of the grinding ball will not be changed.
厚度可控。可用于修复零件表面和工模具因磨削加工或磨损而引起的尺寸超差，使报废零件复用。
Thickness could be controlled, it can beused to repair parts for the surface and tool grinding or wear caused by thedimension tolerance, so that can make the scrapped parts reuse.
使用机械 -化学抛光法加工大尺寸单晶硅可获超光滑表面 ，但很难保证良好的面型。
In Chemical-Mechanical polishing experiments we produced optical quality super smooth surfaces on single-crystal silicon, but cannot insure the surface figure.
厚度可控。可用于修复零件表面和工模具因磨削加工或磨损而引起的尺寸超差，使报废零件复用。
Thickness could be controlled, it can be used to repair parts for the surface and tool grinding or wear caused by the dimension tolerance, so that can make the scrapped parts reuse.
实验结果表明，采用概率统计分析实现金属丝网超差尺寸检测的检测方法是较为有效的。
It is verified through the experiments. The experimental results show that the method is applicable.
针对热轧带钢粗轧头尾宽度尺寸精度低的现状，分析了带钢头尾宽度超差的原因。
For the present situation of rough rolling strip head and tail low width precision on hot strip mill, analysis the cause of strip head and tail width tolerance.
本发明利用工具和工艺装 备将弹簧的尺寸超差部位持续加力使其固定到公差范围内；
The method utilizes tools and technique equipment to apply force continuously on the parts size of which is out-of-tolerance so as to fix the size to the tolerance limits;
本发明利用工具和工艺装 备将弹簧的尺寸超差部位持续加力使其固定到公差范围内；
The method utilizes tools and technique equipment to apply force continuously on the parts size of which is out-of-tolerance so as to fix the size to the tolerance limits;
应用推荐