给出开关磁阻调速电机的优点。
The advantages of the switched reluctance variable speed machine is given.
采用可调速电机,自动摆线。
采用调速电机和调速器,调速范围大。
Using speed adjustable motor and speed adjustor, and speed range.
收卷采用调速电机中心卷取,收卷平整密实。
Winding adopts center winding with speed regulating motor and the winding is leveling &compaction.
介绍了用开关磁阻调速电机驱动挤出机的方法。
A driven method of extruders by variable speed switched reluctance motor drive is put forward.
介绍了一种以微机控制变频调速电机驱动电缆卷筒的装置。
This paper describes a device of cable reel which is driven by computer controlled frequency-changing motor whose velocity can be regulated.
包覆速度使用电磁调速电机控制,可在较大的范围内调整。
The wrapping speed is controlled by the engine with electrical magnetism timing. It can regulate in a large scale.
针对串电阻调速电机车存在的弊端,提出进行斩波调速改造。
In view of the drawbacks existed in speed regulation of electrical locomotive with series resistance, the transformation of chopping speed regulation is put forward.
D1采用电子调速电机及微电脑控制自动剪线机构,具有自动剪线功能。
GC0618-1-D1 is used with electric speed adjusting motor and micro control box for thread trimming.
烘干机采用石英玻璃加热管加热,采用无级调速电机,输送带运转平稳。
The dryer USES the quartz preheated pipe to heat up, the machine USES the staples governor, the conveyor belt revolution is steady.
无换向器电动机是一种新型的可调速电机,其调速性能优于直流调速系统。
No commutator motor is a new variable-speed motor, its adjustable-speed performance is more advantage than dc system.
在长距离输油(气)管道工程中,大部分泵站内的主泵采用调速电机驱动。
Most of main pump in pump stations driven by variable speed motor for long distance transport petroleum engineering.
电磁调速电机在低冲次、低产量油井中的高能耗、低效率问题已被逐渐重视。
The problem of electromagnetism governing-speed motors higher-consuming energy and lower frequency on low yield oil well through some contrast experiments is confirmed.
介绍了一种新型的可替代进口的调速电机,分析了采用两种制动结构对设备的影响。
A new type adjustable speed motors are introduced instead of imports, the effects of two braking structures to the motor are respectively analysed.
本文根据变频调速集成系统的特点,提出具有针对性的变频调速电机优化设计策略。
Based on the characteristics of adjustable speed with variable frequency systems, the paper presents an optimal design strategy.
整粒部分由变频调速电机拖动整粒刀旋转将片状物料整形成所需的颗粒在网孔中排出。
The whole granules are discharged from mesh holes by frequency conversion motor which drives whole granulation knife to rotate and transform materials into the desired granule particles.
牵引电机采用电磁调速电机,无级连续可调,收卷机采用单轴收卷,由力矩电机带动。
Traction roll is made with fire resistant rubber. tractive motor USES electromagnetism adjusting speed, freely adjusting speed continue, reel motor use single shaft, momental motor drives it.
本机配机械无级调速电机、驱动转盘旋转,转盘的转速可在工作时间任意调速,调速平稳。
A mechanical stepless speed regulator is adopted to make the curbing work. The speed can be regulated when the curbing work and can be slewed steadily.
而变频调速电机的设计重点是在调速范围内的效率、功率因数、温升,以及动态响应性能等。
But the emphases of the design for an inverter-driven induction motor are the efficiency, power factor, elevated temperature in the variable speed range, and dynamic response.
磁辊通过调速电机拖动,转速的快慢通过调速表来进行调节,可控制磁选机的产量和精矿品位。
Magnetic roller through rotational speed motor that responds to adjust speed table by separators, can control the output and concentrate grade.
本机适用于各种材质皮料切削工艺。送料有单独调速电机控制,根据工艺要求可自由调节送料速度。
This machine is suitabw for skiving leather of various materials , Feed is controlled by an indiviual motor , which can adjust the feed speed according to the required tecchnology.
分析了异步电动机串级调速的工作原理与性能特点,介绍了内反馈串级调速电机及其装置的系统结构。
The working principle and performance characteristic of asynchronous motor cascade velocity modulation are analyzed, and the inner feedback cascade velocity modulation is introduced systematically.
分析了异步电动机串级调速的工作原理与性能特点,介绍了内反馈串级调速电机及其装置的系统结构。
The paper introduced the application of internal feedback cascade speed control system on boiler fans in Yancheng Plant.
QABP系列变频调速电机吸收了德国、日本等先进国家产品之优点,应用计算机辅助设计技术进行设计。
Adopted the advantages of the same-type motors of industry-advanced countries such as German and Japen, QABP Series motors are designed with computer assistant technology.
最后,对变频调速电机的实际低频与中频电压、电流信号进行了分析,得出了正确结果,验证了该方法的有效性。
In the final, process the actual test low frequency and middle-frequency electric voltage and current data, attains the accurate result and verifies the accuracy of the method.
本文中,我们采用了一个简单的控制方法及系统设计,通过对一交流调速电机驱动器的原型实验,验证了该方法的有效性。
A case study for an adjustable-speed AC motor drive is demonstrated by means of a prototype experiment to prove its performance and effectiveness.
介绍磁补偿霍尔传感器的工作原理及其优点,讨论了它在变频调速电机、不间断电源(ups)及直流驱动控制方面的应用。
Magnetic Compensated Hall Sensors' theory and merits are introduced in this paper. The application in variable frequency machines, UPS and direct-current drive controller is also given.
第一次在切菜机上运用施奈德PLC和TDA1085C来控制两个调速电机以及一个调节长度电机,实现了速度和长度的精确控制。
Used Schneider PLC and TDA1085C to control two adjustable speed motors and one adjustable length motor in cutters for the first time.
文中讨论了一种以最少参数确定一条圆弧轨迹的插补方法和步进电机变频调速的方法。
This paper discusses a minimum of parameters to determine the trajectory of a circular interpolation method and the method of frequency control stepper motor.
文中讨论了一种以最少参数确定一条圆弧轨迹的插补方法和步进电机变频调速的方法。
This paper discusses a minimum of parameters to determine the trajectory of a circular interpolation method and the method of frequency control stepper motor.
应用推荐