在参数设计中，质量特性的波动性(或稳健性)分析处于极其重要的地位，是试验设计与分析的重点。
The analysis of the variation (or robustness) of produces quality performance is the key of robust parameter designing, and is the focus of experimental planning and analysis.
她认为，设计一项对照试验与仅仅分析统计数据相比，将更有助于研究人员了解影响IVF成功率的因素。
She thinks that designing a controlled experiment will give researchers a better understanding of the factors affecting IVF outcome, rather than just analyzing statistics.
从混凝土路面与基层接触界面的破坏试验入手，分析基层对面板的约束状况，从而为水泥混凝土面板的设计提供参考。
This paper proceeds from the destruction test of the contact interface, and then analyzed the restraint state so as to offer designing consultation for cement concrete face plate.
试验与数值对比分析表明该方法合理有效，可作为桥梁加固的设计计算依据。
The results show that this method is rational and effective, it can provide a basis for bridge strengthening practice.
为狮子滩电厂水轮机增容改造研制和设计的模型转轮及模型机的主要参数分析与设计思路和试验研究结果。
The main parameters of model runner and model machine designed and developed for turbines transformation at Shizitan Power plant are analyzed. Design Considerations and test results are presented.
本文在线性二次最优控制设计中关于权矩阵的选取问题作了大量的试验与仿真分析，得到了关于权矩阵选取的一些基本规律。
With a lot of tests and simulation analyses from the weight matrix selection of quadratic optimum control design, the principles of selecting weight matrix are summed up.
与传统的样车试验和单纯的有限元分析相比，可大大提高新车开发和旧车改型的设计效率。
The design efficiency is greatly improved in developing new car or remodeling old product compared with the traditional physical experiment and finite element analysis.
文中介绍了PVRC“里程碑”试验结果，并分析了其与法兰设计的关系。
The results of so-called PVRC "Milestone" experiments and the analysis of their relations with gasket design are shown in this paper.
理论计算结果得到了试验结果的验证，可用于车辆乘坐室内饰吸声的动态设计与分析。
The result of the theoretic calculation has got test verification so that it may be used in dynamic state design and analysis of internal trimming sound absorbing of motor vehicle passenger housing.
与试验设计方法相结合，提出了一个用于集成电路工艺实时统计分析的方法。
A real time statistical analysis methodology of IC manufacturing process in combination with an experimental design is presented.
有限元分析与实际试验结果具有很好的一致性，为该壳体结构的设计改进提供了理论依据。
The analysis agrees quite well with the results of real test, which provides theory support for improving of case design.
通过仿真与试验，设计了脉冲固体激光掩膜加工器的电源电路及控制系统，并详细地分析了它的工作原理。
Then the pulsed solid state laser power and mask machining system is designed through simulations and experiments. And the system working theory is also analyzed.
文章对正交试验进行了分析，并将其与软件测试理论相结合，提出了测试用例的正交设计方法。
Through analyzing the orthogonal test and incorporating it with the software testing theory, this paper puts forward an orthogonal method to design test cases.
飞机结构强度和刚度的试验与分析研究是飞机设计的重要环节。
The test and analysis about intension and stiffness of airplane structure is a important part of airplane design.
理论计算公式与试验分析方法为同类包装筒设计提供了参考。
Formulas of calculation and method of analysis in this article offer reference for design of the same kind of packing box.
在理论模态分析的基础上，根据现有的试验设备设计了合理的试验方案，为下步的振动与噪声的试验做了必要的理论准备。
Finally, Based the analysis of theory modal, a modal testing program has been designed according to the existing test equipments, which prepares for the next testing of the vibration and noise.
应用可靠性设计方法，对超高压圆筒耐压试验压力进行探讨，定量分析试验压力与影响因素之间的关系。
In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied.
分析了高空模拟试验舱的传热与舱压分布，并提出了计算方法，为高模试验舱的结构设计提供了参考。
This paper analyzed the heat transfer and the distribution of pressure in the high-altitude simulated test module, and proposed the methods of calculation.
本文通过对飞机主起落架的车轴的应力分析与试验研究，能够对飞机起落架的设计研究有一定的参考价值。
By doing stress analysis of a axle airplane's main landing gear and experiment studying, the paper can provide some useful value to the design and study of airplane's landing gear.
三牙轮钻头地面台架试验与井底模式的分析是对牙轮钻头设计的合理性进行检验与改进的最简便又较真实的方法。
The bench test of three-cone bits and analysis of their bottom hole patterns are the simplest and useful means of checking and improving their design.
本文主要介绍国内外关于FRP片材加固混凝土构件疲劳性能的试验研究、仿真分析与设计建议等方面的最新研究进展。
Latest studies on fatigue behaviors of concrete members strengthened with FRP sheets are introduced in this paper, including experiments, simulation analysis and design Suggestions, etc.
应用可靠性设计方法，对钢制外压圆筒形容器压力试验进行了研究，定量分析试验压力与影响因素之间的关系。
The test of external pressure is studied for steel-walled pressure cylinder by using reliability method. The relation of external pressure test and influencing factor is analyzed.
在对辐射、对流以及物料特征全面分析的基础上，设计制作了红外辐射与对流联合干燥试验装置。
Based on analyzing the general property of radiation, convection and material, an experimental equipment was designed and manufactured.
根据控制系统试验与调试的需要，设计了一套基于DCS的控制系统试验与分析软件。
The control system testing and analysis software based on DCS is designed to meet the needs of the control system testing and debugging.
在可调减振器的设计基础上，分别对车辆阻尼优化前后进行了试验，分析了车身与驾驶员座椅处的振动特性，计算与试验基本吻合。
A turnable damping was designed, and based on these, the road tests were done, analytical study on vibration performances of passenger seat were carried out, and the results were accordant.
采用理论分析、试验制品设计与实验结合的研究方法，研究卡车翼子板旋转模塑成型试验制品设计问题。
The experimental part design of rotationally molded truck fender was studied by combining theory analysis, experimental part design and experiment.
方法：采用均匀设计与正交试验法，以外观评分和包封率评分为指标，综合分析试验结果来确定制备工艺条件。
METHODS: Taking the score of appearance and the score of drug embedding ratio as indexes, the technical conditions were determined by uniform design and orthogonal test.
本文所作的分析、计算、设计与试验，均与工程实践紧密结合，对地形跟随雷达的工程化研制有一定的参考意义。
The analysis, computation, designs and experiments made in this paper are important for implementation of Terrain Follow Radar.
因此对砌块式挡土结构的受力特点、设计计算理论及施工要点进行理论分析及试验研究，具有一定的理论与工程实际意义。
Thus the research on stress trait, design calculation theory and construction principal point of block retaining structure has certain significance in theory and practical engineering.
因此对砌块式挡土结构的受力特点、设计计算理论及施工要点进行理论分析及试验研究，具有一定的理论与工程实际意义。
Thus the research on stress trait, design calculation theory and construction principal point of block retaining structure has certain significance in theory and practical engineering.
应用推荐