模拟试验及工程实用证明，该方法可行、准确、实用，对于指导辊锻工艺与工装设计具有重要意义。
Proved by simulated test and engineering practice, this method is feasible, accurate and useful and has great significance to direct roll forging technology and tool design.
通过正交原理设计试验及优化方法寻找最佳参数，对陶瓷表面化学镀工艺进行了研究。
This paper, with orthogonality designing the experiment and finding the parameters through optimizing method as well, mainly discusses the chemical plating technology on the ceramics.
介绍了某型号运载火箭二级燃料箱后底顶盖成形方法改进及工艺试验过程。
The paper introduces the shaping method improvement and technological trial course of bottom cap of certain model of carrier rocket's fuel tank.
介绍了车用空调压缩机罩体支架的冷挤压成形工艺及冷挤压模具设计，采用工艺试验的方法确定挤压坯料尺寸。
The forming process by cold extrusion for the hood pedestal of the auto air_conditioner compressor and the design of the cold extruding die were introduced.
阐述内锥面刃磨麻花钻原理及在工具磨床上进行磨削工艺试验的方法和机床的调整。
Illustrates the principle of the inner cone grinding twist drills, the process of grinding experiments on the tool grinder and the adjustment of the tool grinder.
对醇酸树脂合成方法及影响因素进行了试验和分析，确定了改进合成工艺条件、提高醇酸树脂质量的方法。
Some experiments are made so as to change the process parameters for processing alkyd resin and then, to improve the quality of the resin.
通过试验，探讨了四面弹力网花边的定形工艺及调节方法。
Based on production experiments, the heat setting process of two-way elastic lace and its adjustment are analyzed.
方法：采用正交试验的方法，选择最佳处方及工艺，并考察其室温条件下和加速试验后其质量稳定性。
Method: To choose best recipe and craft by doing experiment of face junction and survey its quality stability under the condition of chamber temperature and hasten experiment.
介绍了玻璃钢供水管道现场压力试验的试验条件，试验工艺及试验方法，供同行参考。
This paper introduces the experiment condition of pressure experiment for water supplying pipeline of glass steel, experiment technology and method.
对复合材料蜂窝夹芯结构受损伤之后的几种典型修理方法及修理材料、修理工艺等内容进行了试验研究。
A few methods, materials and techniques of repair on composite honeycomb sandwich structures after damages are investigated experimentally in this paper.
在多次试验的基础上，用回归分析的方法，找到了浆纱工艺中伸长的规律及控制的方法。
Based on experiments and by means of regression analysis, the regularity and the control method of the extension rate in sizing process are presented.
介绍日本有关超高压薄膜电容器产品标准、试验方法、材料要求、产品设计原理及工艺方法等。
This paper presents an overview of related Japanese product standard, testing method, requirement for material, design theory and technological process for very high voltage film capacitor.
试验结果表明，稳定伞的材料、设计及工艺是可行的，试验方法是成功的。
The test results show that the material, design and craft of the stabilizing parachute are applicable and the test method is successful.
因此，提出了研制和开发高性能水基降粘剂的思路及方法，并结合油田矿场试验实际情况，指出了改善工艺条件的方向。
Therefore, the thought and method of developing high performance water - based viscosity reducer are proposed. According to field test, the orientation of improving process conditions is also Po...
本文介绍了对铝及铝合金零件进行彩色化学转化处理的HY—200法的工艺及质量控制的试验方法。
HY-200 process procedure for colour chemical conversion coating of al and its alloys parts and the test method for quality control are introduced in this paper.
介绍了油泵油嘴针阀体的楔横轧工艺试验，以及在试验中遇到的问题及解决方法。
Technological experimental research for cross wedge rolling technology of pin valve of oil pump has been introduced with problems and relevant solutions during the process.
本文针对铝及铝合金铬酸阳极氧化工艺中出现的问题，论述并分析了除油、水洗、铬酸阳极氧化、封闭等工艺方法和试验结果。
In view of the problems in chromate anodizing process of aluminium alloy, this paper analysed the process of degreasing, rinsing, chromate anodizing, sealing and the experiment results.
试验采用前置厌氧池的DAT - IAT工艺方法，以城市污水为处理对象研究工艺的生物降解过程及除磷效果。
By means of setting up an anaerobic tank in front of DAT-IAT, biological degradation performance and phosphorus removal efficiencies are studied with municipal sewage.
方法：对该制剂的处方组成、制备工艺、质量控制及临床应用进行试验和总结。
Methods: it was examined and summarized that composition, technology, quality control and clinical application of the viscoelastic agent hydroxy-propyl-methylcellulose.
方法采用单因素考察及正交试验设计，以白芍总苷的含量为考察指标优选提取工艺。
Methods Using single factor and orthogonal design to determine the content of total glucosides of paeony as the index of evaluation and to optimize the extraction technology.
运用正交试验方法，优选最佳配方方案，研制出低热能面包，论述了制作工艺、流程及配方。
It also expounds the baking techniques, procedures as well as recipe of the bread with low calorie after adopting orthogonal experimentation and selecting the best recipe.
利用正交试验设计及模糊综合评价等方法对北方馒头的速冻生产工艺进行研究。
The quick-frozen production technology of Chinese northern steamed bread was investigated by orthogonal array design and fuzzy comprehensive evaluation.
以气门的离子轰击热处理为研究对象，通过对装炉形式、处理温度及工艺方法等试验，探讨了尺寸精度要求较高的细长杆件的离子热处理工艺。
An process of ion bombardment heat treatment for high dimension precision slender rods was discussed through treating the valves with different loading ways, heating temperature, and heating ways.
并通过一系列焊接工艺试验，确定采用管子内缩管板和高铬镍焊材及自动脉冲钨极氩弧焊方法，提高了管子管板的焊接质量和可靠性。
A series of welding process testing showed that using recessed tube-tube sheet, high Cr-Ni welding materials and automatic TIG welding technology could improve the welding quality of tube-tube...
方法：以栀子苷转移率及固含物转移率为指标，确定最佳萃取方法，并采用正交试验优选最佳工艺条件。
Methods: The orthogonal test was used to optimize the process conditions with the transfer rates of geniposide and solid material as the indexes.
方法 采用单因素及正交试验设计，以浸膏率为考察指标优选乌鸦果提取工艺。
Methods Single factor and orthogonal experiments were designed to determine the extractive rate as the index of evaluation and to optimize the extraction technology.
本文介绍有关注空气的室内试验、数值模拟及现场应用与先导试验设计，同时探讨这种工艺方法在提高采收率方面的效果。
This paper gives an introduction on indoor testing, numerical simulation, field application and pilot test design of air injection, and discusses its effectiveness in enhancing oil rec...
利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ，研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ，探讨了添加稀土提高玻璃涂层耐蚀性的机理。
The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ，研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ，探讨了添加稀土提高玻璃涂层耐蚀性的机理。
The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
应用推荐