多功能水泵综合试验台不仅可以进行水泵的内外特性试验，而且还可以进行水轮机试验和小水洞试验。
The multiple-function pump test-bed can not only test pump's inner and outer performance, but also carry out to test water turbine and small type of water hole.
试验台的建成将为我国盾构机的研制和盾构隧道工程提供关键的试验设备。
The accomplishment of the test bench has provided a key test equipment for the development of shields and shield tunneling projects.
通过理论计算和1：1制动试验台试验，证明该闸瓦完全能满足东风8B内燃机车的制动要求。
According to theoretical calculation and test results in 1: 1brake test rig, it proves that the brake shoes may meet the brake needs ofDF8B diesel locomotive.
介绍了用微机与金属管浮子传感器和单片机组成测定装置，代替用玻璃浮子量油的传统PT燃油泵试验台，解决了目前PT燃油泵试验台现存的量油系统误差大的问题。
This text researches the testing equipment with computer and metal pipe float sensor and SCM, so that it can replace the traditional PT fuel pump test-bed measuring the oil with the glass float.
阐述了在微缩试验台对轮轨蠕滑力进行的试验，重点介绍了试验设备、方法和试验结果。
The test for creep force between rail and wheel on the scaled test stand is expounded. The test equipment, method and test results are mainly described.
介绍了作者研制的摩托车离合器性能试验台的工作原理、离合器性能试验的原理和方法、试验台的功能及其实现方法。
The paper describes the development of the tester for motorcycle clutch performance, the mechanism and function. It gives the approach to design and manufacture the tester.
该试验台可以改变各输送参数和设备运转条件，还可以变换不同型号的设备，实现在一个试验台上完成多个工况的试验。
Such a test bench not only changes each conveying parameter and working conditions of the equipments, but also makes it possible for equipments with different sizes to be tested on it.
在甘蔗收割田间试验和螺旋式扶起机构扶起甘蔗运动过程观测的基础上，建立了螺旋式扶起机构模拟试验台。
Based on field experiments of sugarcane harvest and observation to the motion of sugarcane in lifting process, a spiral sugarcane-lifting simulation mechanism was manufactured.
依据冷态相似模化的原理搭建气固两相流冷态实验台，利用试验台分别对原有旋流燃烧器模型和3种改进的燃烧器模型进行气相试验。
According to the principle of cold conditions similar, air firm two-phase flow experiment of cold conditions is built, testing the original burner model and 3 kinds of improvement test model.
加载工程机械主要的两种加载模式正弦波载荷和阶跃载荷，试验台动态仿真的结果表明系统动态响应性能能够满足试验要求；
We put the two main engineering machine loading which are sinusoidal wave load and step load, and the results indicate that the dynamic responds are satisfied for the needs of the experiments.
本文应用相似理论，研究论述了竖井冻结过程和掘砌过程的模化原理，及模拟试验台的设计和试验。
Based on the similitude theory the paper discusses the modelling principle of shaft freezing and sinking. Also, the design of the model test rig is described.
本文介绍了一个全尺寸十级亚音速轴流压气机试验台，并给出了该实物压气机旋转失速和喘振的试验结果。
The present article describes the pilot stand of a full scale ten-stage subsonic axial-flow compressor and presents the test results of the rotating stall and surge obtained therefrom.
论文主要内容如下：对半喂入式花生摘果试验台的结构和工作原理进行了简要分析，总结了该试验台的主要性能特点。
The main contents are as follows: the structure and operating principle of the half feeding type peanut stripping tester are briefly analyzed, and primary capabilities of this test-bed are summarized.
在该试验台能进行静压和动静压轴承的静特性和动特性试验，并能进行实验数据的自动采集与处理。
It can be used to carry out the static and dynamic tests for middle sized slide bearings, and the data collection and processing can be taken automatically.
研制了一套多功能水模拟试验台，适用于重力铸造及低压铸造浇注系统和充型过程的水模拟试验。
Adapting to pouring system and filling mold water imitation of gravity cast and low pressure cast, the multi-purpose water imitation experiment set is studied.
基于SCHENCK整车道路模拟试验台，设计和实施了AD250铰接式自卸车整车道路模拟试验。
Road simulation experiment of AD250 articulated dump truck was designed and implemented on SCHENCK road simulation test bench.
系统地阐述了钻井泵泵阀试验台的设计指导思想和设计方案的确定依据，并介绍了试验台系统压力的调节方法和计算公式。
The guide rule and general plan to design a laboratorial test stand for drill pump valves are expounded, and the regulation and calculation of the system pressure of the stand are discussed.
采用模拟试验的方法，建立了模拟试验台，对齿轮电蚀问题进行了大量的模拟试验，试验结果证明了齿轮电蚀理论的正确性和试验方案的可行性。
A simulation test table is made by means of simulation test to carry out large Numbers of tests on the problem of electrical erosion of gears.
利用空气制动仿真软件仿真分析了120阀在705试验台和120阀试验台上的初充气试验过程。
The air braking simulation software is used to analyze the initial charging test process of the 120 valves on the 705 test stand and the 120 valve test stand.
泵阀试验台测控系统主要由试验台的数据采集处理系统和自动控制系统两部分组成。
The measurement and control system of pump-valve testing station is mainly composed of data acquisition, processing system and automatic control system.
通过现场的试验，证明了本课题设计的试验台的正确性和可行性，具有很强的可操作性。
Field test results show the correctness and feasibility of the test bed, and it is said to be operating easily by the users.
试验台由微型计算机，CRT显示器，打印机，盒式磁带机和放电柜组成。它能按照四种基本放电方式进行试验。
The set consists of a microcomputer, a CRT display, a printer, a cassette recorder and a discharge panel.
该试验台由台架系统、测试系统和动力系统三部分组成，可以完成主要机理的试验研究工作。
It is composed of a desk system, a test system and a power system and can carry out experimental research work.
本文在对增压器整体动平衡试验必要性论述的基础上，介绍了ZJ K型增压器整体动平衡试验台的设计方案、功能和特点，以及研制中一些技术问题的研究和解决。
The paper gives discussions on design plan, function and character ices of the ZJK Test Bench for turbocharger Dynamic Balance as well as on solving of technical issues.
所以对于摩托车研究人员和摩托车生产厂家来说，排除该试验台的故障和对试验件的性能分析就显得尤其重要。
As a result, it is very important to remove the fault of the test-bed and to analyze the performance of the tested to motorcycle researchers and motorcycle manufacturers.
飞机液压附件综合试验台是针对目前装备使用试验台技术水平落后、设计效率低下等问题和满足我国引进新一代先进飞机液压系统检测需求设计而成。
The test-bed is designed for the inspection of new plane hydraulic system and improves the old one's disadvantage such as that the technology level drops behind and the inspection efficiency is low.
飞机液压附件综合试验台是针对目前装备使用试验台技术水平落后、设计效率低下等问题和满足我国引进新一代先进飞机液压系统检测需求设计而成。
The test-bed is designed for the inspection of new plane hydraulic system and improves the old one's disadvantage such as that the technology level drops behind and the inspection efficiency is low.
应用推荐