本文基于线性兴波阻力理论，把控制尾流分离作为约束条件，利用优化计算方法对设计水线下船体外形进行优化研究。
Based on linear wave making resistance theory and on & technique of boundary layer separation control, the present paper gives an optimized study of hull form below the design water line.
继承和责任的流水线经过精心设计，就像苹果曾经设计过的任何一款硬件一样流畅。
The lines of succession and responsibility have been carefully crafted and are as sleek as any piece of hardware that Apple has ever designed.
本文结合实际工作，着重介绍滚镀锌生产流水线的微型机控制总体设计，以及某些设计技巧。
This paper mainly introduces the general microcomputer control design of the zincifying productive line and some problems about design skill.
制造企业是输送机械、生产流水线设计研发、生产、销售、安装等服务的专业化公司。
The the Haoyu conveyor manufacturing companies to transport machinery, production line design and development, production, sales, installation and other professional services companies.
本设计为兼顾模数转换器的速度和精度，采用数字校正技术，以每级1.5 位的9 级流水线结构实现。
The converter has a good tradeoff between conversion speed and conversion precision. It is a 1.5-bit per stage with 9 stage and digital correction technique.
服装生产流水线的优化编排是数字化服装工艺设计的重要内容之一。
Optimizing the arranging of garment procedure is one key part of digital garment design.
设计了一种新型的带有可运动人工水线的拉索模型，并进行了风洞试验。
A new cable model system with a movable artificial rivulet is designed and tested in a wind tunnel.
成衣流水线的设计改造、计算机辅助设计应用、作业程序标准化、车间工作效率改造以及企业网络组建等。
It includes the design of fashion production line, the application of computer assistant design, the standardization of task process, work efficiency and the establishment of corporation network.
而流水线技术是现代CPU设计的核心技术，是决定CPU运行效率的关键因素。
Pipeline technology is the kernel technology of modern CPU design. It's the key of the CPU efficiency.
其中，提出了流水线控制单元的优化设计，将控制状态机的状态数目从85个减少到23个，节省了电路面积，提高了速度。
The optimized design of pipeline control unit is also proposed, which greatly minimizes the FSM states from 85 down to 23, with improvement in circuit speed and area utilizing.
从机器人的喷房尺寸、动作方式、运枪速率、喷涂效率等参数设计方面讨论了机器人喷涂流水线上的工序能力设计。
Process parameters of robot spraying line are designed in terms of dimension of spraying booth, moving mode, moving speed of spraying gun, spraying efficiency, etc.
设备制造技术的提升将在改进服装企业产品设计、工艺再造、流水线安排等关键环节产生重大影响。
The improvement of equipment manufacturing technology will have a impact on enterprise product design, process reengineering and industry chain arrangement.
通过采用流水线技术和模块复用等优化设计，可以大大提高译码速度，减少资源消耗。
The design uses pipe-line and module reused technology, thus speeding up the decoding process and reducing the resource consumption significantly.
运用流水线技术对单精度浮点乘法和加法运算单元进行了优化设计。
For optimizing floating-point units, a design based on pipeline techniques is described in this paper.
设计主要考虑了流水线操作和并行度处理。
Pipelining and parallelism were main consideration of the design.
该文从消除时钟信号冗余跳变而致的无效功耗的要求出发，提出了应用并行技术和流水线技术，实现基于RTL级的双边沿触发计数器的设计。
To erase the bootless power dissipation of the redundant leap of the clock, this paper proposes the RTL design of double edge triggered counter using parallelism and pipeline technique.
该设计提出了一种将常用的并行SIMD结构与流水线MISD结构相结合的新颖并行视频处理体系结构形式。
In this process, a unique parallel video processing architecture combined with SIMD and pipeline MISD is proposed. Modules within the coprocessor are designed individually.
提出了一种应用于流水线型模数转换器(adc)的增益提高型套筒式全差分跨导放大器(OTA)的设计与分析方法。
This paper describes the design and analysis of a fully differential, gain-enhanced CMOS telescopic operational transconductance amplifier (OTA) used in a pipeline analog-to-digital converter (ADC).
文章介绍了基于FPGA的流水线RISC微处理器的设计，包括关键模块设计和流水线设计。
This paper introduces the design of RISC microprocessor with pipelining based on FPGA, which is included the design of key modules and pipelining.
该设计采用流水线处理结构，能达到非常快的处理速度，同时进行了功耗优化。
It is a very high speed VLSI Design through the pipeline architecture with power optimization.
文章基于FPGA采用流水线技术和优化设计，提出了一种更高效的AES算法IP核的设计方法。
This paper presents an efficient design of AES algorithm's IP core in FPGA using pipelining technique and optimized methods.
本文提供了小水线面双体船(SWATH)结构载荷的解析方法以及用于初步设计的简捷算法经验公式。
This paper present the analytical method for structural load calculation for SWATH ship, and the short cut method with empirical formula for preliminary design.
本文的设计着重从多个层次利用并行处理技术来提高环路滤波的速度，包括流水线设计、数据流驱动控制策略以及算法并行性设计。
Our design emphasizes on using parallel processing technology from multi-level to improve speed, including pipelining design, data-flow drive strategy and algorithmic parallelism design.
本文设计的FFT处理器采用流水线和并行处理技术，在64个时钟周期完成64点复数定点FFT运算，可以满足OFDM系统的需要。
The FFT processer adopts the pipeline and parallel technology and can complete 64 points FFT computation in 64 clocks. It is able to meet the need of OFDM system.
提出了一种基于IEEE754标准的双精度浮点乘法器的流水线设计方法。
A new design method of pipelined multiplier for double precision floating point data based on IEEE754 standard was proposed.
对于通信接口芯片设计，数据帧依照时间顺序依次到达，因此，采用流水线数据通道对帧数据进行处理是有效的优化方法。
Because data frames arrive in term of time slot for the communication interface integrated chips, the pipeline data path is an effective optimization method.
总装物料配送优化设计思想为汽车装配厂解决生产流水线的高效率和低效、繁杂的物流配送的矛盾提供了新的契机。
The optimized design for the main assembly materiel logistics provides a new chance for automobile assembly plant to overcome the problem between efficient pipelining and inefficient materiel freight.
总装物料配送优化设计思想为汽车装配厂解决生产流水线的高效率和低效、繁杂的物流配送的矛盾提供了新的契机。
The optimized design for the main assembly materiel logistics provides a new chance for automobile assembly plant to overcome the problem between efficient pipelining and inefficient materiel freight.
应用推荐