根据处理器技术的不同，不同的风扇散热器有不同的设置温度。
Set points vary on various boxed fan heatsinks due to processor technology.
温度自动控制，设置温度，低于一个温度加热，高于一个温度风扇工作降温。
The temperature automatic control, the establishment temperature, is lower than a temperature to heat up, is higher than a temperature ventilator work temperature decrease.
如果环境空气温度不超过最低设置温度，风扇一直以设定温度转动(见表1)。
The fan operates at a set speed until the inlet air temperature exceeds the lower set point (see Table 1).
还能够设置温度预警值，当采集到地温度超越设置地预警值时，驱动蜂鸣器报警。
Can also set the warning temperature value, when the acquired temperature exceeds the warning set value, the drive buzzer alarm.
键盘输入实现设置温度值的大小调理，风扇电路实现新风功用，对室内空气停止改换。
Keyboard input realize temperature size adjustment, set up fresh function, realization fan circuit of indoor air for replacement.
本篇论文主要通过DS18B20做传感器来测量温度，以及通过它来设置温度的上下限。
This paper DS18B20 done mainly through sensors to measure temperature, and through it to set the temperature of the upper and lower limits.
找出空调器的设置温度与耗电量的关系，分析影响空调器耗电量的主要因素，从而通过空调设置温度达到节能。
Find out the relationship between the set temperature of air conditioner and the electric power consumption. Also, analyzed the main factor which influences the electricity power consumption.
注：再循环控制水温自动调节器的温度设置必须比系列N170-M2阀门的设置温度低5至10华氏度，否则，再循环器将会不断运行。
NOTE: Recirculating control aquastat must be set at least 5oF to 10oF lower than the temperature setting of the Series N170-M2 valve, otherwise the recirculator will run continually.
本系统可以实现多路温度信号采集与显示，可以使用按键来设置温度限定值，通过进行温度数据的运算处理，发出控制信号达到控制蜂鸣器和继电器的目的。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
该杂志发现不是全部但是是大多数的更新的冰箱都有很好的温度控制，尽管有数码控温设置的冰箱是最好的。
The magazine found that most but not all newer models had good temperature control, although models with digital temperature Settings typically were the best.
它考虑当前温度、当前湿度和当前季节，以便为所监视的区域确定供热或空调设置。
It takes into account current temperature, current humidity, and current season of the year in determining the heating or air conditioning setting for the area being monitored.
光线和温度传感器的输出可以设置成邮件提醒，甚至存入数据库，Morey说，但通过Twitter更有趣。
The output from the light and temperature sensors could have well gone into a E-mail alert or even a database, says Morey, but tweeting is a lot more fun.
可以将其设置为开机启动，并且在温度达到太高时拉响警报。
It can be set to run on startup and sound an alarm if the temperature gets too high.
超过半数的受访者认为减少使用是节能重点——例如关灯、调节温度器设置以及少开车。
More than half the participants focused on conservation by curtailment: switching off the lights, changing thermostat settings and driving less.
它可以自动上弦，具有三问报时、万年历、时差设置以及跳时功能，另外还配有动力储备指示器和双金属温度计——除了MMS彩信功能什么都有的。
It's self winding, has a minute repeater, perpetual calendar, equation of time, jumping hour, power reserve indicator, and a bimetallic thermometer - everything but MMS messaging.
在进行低于室温的试验时，打开制冷开关，仪器也同样进行自动控温并在设置的温度点范围内恒定。
In the below room temperature test, opening the refrigeration apparatus also switch, automatic temperature and the set temperature range constant.
如果它变软了，那表示温度至少是华氏八度，你需要调低温度设置。
If it feels soft, that means the temperature is at least 8 degrees Fahrenheit and you need to lower the setting.
伸缩缝由于铝合金温度变形较大，为使幕墙有足够的变形随动性，幕墙立柱需设置伸缩缝。
Expansion joints due to large aluminum alloy temperature deformation, to make the curtain wall has enough deformation servo, curtain wall pillar setting expansion joint.
我们这款旗舰温度检测仪可进行定制化的报警设置，以最大地满足各种在途以及存储应用。
Our flagship temperature monitor offers customizable alarm Settings to meet the widest array of in-transit and storage applications.
此外，必要时使用空调，我通常设置为一个适当的温度，这样我也能够使用更少的电力和省钱。
Also, when it is necessary to use air conditioner, I usually set it to a proper temperature so that I can use less electricity and save money as well.
全自动温度设置程序引导用户分阶程序，以更容易得获得沥青分阶。
A fully automatic temperature setting routine guides the user through the grading process, making asphalt grading as easy as possible.
在程序启动前后，可根据工艺要求随时对物料温度进行上下限设置。
Before and after the program is started, the upper and lower temperature limits of the material can be set at any time according to the technology requirements.
根据吸收液要求的温度，设置恒温温度。
Set the constant temperature according to the required temperature of absorption liquid.
要显示的压力和温度，传感器设置需要单独购买。
To display pressures and temperatures, sensor sets needs to be purchased separately.
传感器设置需要单独购买，以显示对压力和温度的信息。
Sensor sets need to be purchased separately to display the information on pressures and temperatures.
而且，对于恒定额定功率设置的PZT换能器系统，温度的改变导致PZT换能器实际加载的功率及阻抗的改变。
Moreover, for the fixed power setting of PZT transducer, the temperature change can lead to difference in actual power and impedance of PZT transducer.
开机时，设置高风，以最快达到控制目的；当温度适宜，改中、低风，减少能耗，降低噪音。
Boot, set high wind, with fastest control purpose; When the temperature is appropriate, reform, low wind, reducing energy consumption and reduce noise.
制冷时，不要设置过低温度，一般设定在26 - 27度空调冷负荷可减少8%以上。
Refrigeration, do not set too low temperature, generally set at 26-27 degree air conditioning cooling load can be reduced by more than 8%.
你可以运用这些设置来实验影响飞机飞行的环境因素，包括温度、压力、密度、粘滞度和重力。
You can use this to experiment with some of the environmental factors that affect an aircraft in flight, including temperature, pressure, density, viscosity and gravity.
你可以运用这些设置来实验影响飞机飞行的环境因素，包括温度、压力、密度、粘滞度和重力。
You can use this to experiment with some of the environmental factors that affect an aircraft in flight, including temperature, pressure, density, viscosity and gravity.
应用推荐