继续调用键不安全的函数，使用所设置的连接寄存器，以便被调用的函数返回下面的下一个步骤。
Proceed to call the key-unsafe function, with the link register set, so that the called function returns to the next step below.
你也可以设置断点并检查特定内存地址或寄存器的内容。
You can also set breakpoints and examine the contents of specific memory locations and registers.
由于已经正确设置了(模拟)寄存器的值，IS r会正常进行处理，就仿佛它是一个真正的中断。
Since you have already set the (simulated) register values appropriately, the ISR will process normally as if it was a real interrupt.
如果内核编译期间设置了CONFIG_FRAME _ POINTER选项，那么就用帧指针寄存器来维护堆栈，从而就可以正确地执行堆栈回溯。
If the CONFIG_FRAME_POINTER option was set during kernel compilation, the frame pointer register is used to maintain stacks and, hence, the stack traceback can be performed correctly.
例如，通过调用一个可以为SESSION_USER特殊寄存器提供值的函数来设置变量，使用它取回当前用户的部门编号。
For example, a variable could be set by invoking a function that supplies the value of the SESSION_USER special register to fetch the department number for the current user.
很多设备都有配置寄存器，BIOS可以基于系统可写内存中的设置向其中写入合理或正确的值。
Many devices have configuration registers to which the BIOS can write reasonable or correct values, based on Settings located in the system's writeable memory.
存储过程需要将寄存器EXPLSNAP设置为ALL或YES，用以收集存取方案。
The stored procedure needs to set the EXPLSNAP register to ALL or YES in order to collect the access plans.
如果从堆栈或寄存器引用对象，则将dose d位设置为启用。
The dosed bit is set on if the object is referenced from the stack or registers.
[requestcommand]的长度也是一个字节，它的值基于正被寻址的寄存器的类型设置。
[Request command] is also 1 byte long, and its value is set based on the type of registers being addressed. For reading register values.
brsl代表“branch relative and setlink”，用来分支到函数的入口点并将链接寄存器(LR)设置为返回地址的下一个指令。
BRSL stands for "branch relative and set link." This branches to the function entry point and sets the link register (LR) to the next instruction for the return address.
你可以设置一些寄存器，并发出一个系统调用指令(或中断)，并由陷阱处理程序直接调用内核代码。
You set some registers and issue a system call instruction (or an interrupt) and have the kernel code called directly from the trap handler.
链接寄存器只在约定的意义上有一些特殊 ——SPU汇编语言允许在您所选择的任何 寄存器内设置链接。
The link register is only special by convention -- the SPU assembly language allows you to set the link in any register you choose.
链接寄存器只在约定的意义上有一些特殊——SPU汇编语言允许在您所选择的任何寄存器内设置链接。
The link register is only special by convention — the SPU assembly language allows you to set the link in any register you choose.
如果发出一条动态语句，并且设置了CURRENTFEDERATEDASYNCHRONY专用寄存器，那么这个专用寄存器的值就被用来优化查询。
If a dynamic statement is issued and the CURRENT FEDERATED ASYNCHRONY special register is set, the value of the special register is used to optimize the query.
将专用寄存器CURRENTEXPLAINSNAPSHOT 设置为YES以捕获动态SQL语句的快照。
Set the special register CURRENT EXPLAIN SNAPSHOT to YES to capture the snapshot for dynamic SQL statements.
软件上，通过设置相应寄存器的控制位，可以使单片机在不同的低功耗模式下工作。
For software, we can have the microprocessor to work with different low power modes by setting the controller bit of the corresponding register.
这个寄存器设置无线连接的接收频率。从频率表中选择所需的通道。
This register sets the operating Rx frequency for the wireless link Select the desired channel from the frequency table.
通过对SCSI控制器相关寄存器的设置和SCSI协议扩展消息的交互，实现了主机存储通道的数据传输速度达到160MB/s。
The speed of data transfer between SCSI devices is upto 160MB/s implemented by the setting of registers in the SCSI controller and the intercourse of expended SCSI protocol messages.
通过设置TMC428内部参数寄存器和片内ram的值，可使TMC428能够同时控制三个步进电机，实现三轴控制系统。
To set the proper parameter of register and on-chip ram of TMC428, it can make TMC428 control three stepper motor in the same time, and realize three-axis control system.
本文详细描述了MPC8260处理机芯片的FCC内环测试的原理和实现流程，并给出了所有的相关寄存器的设置。
This paper describes the principle and process about the local loop-back test on the FCC of MPC8260 microprocessor, including the setting of all the registers and the setup of FCC.
用LBA地址设置所有的特殊功能寄存器。
利用一个片内控制寄存器，用户可以设置不同的工作条件，包括模拟输入范围和配置、输出编码、功耗管理及通道序列化。
An on-chip control register allows the user to set up different operating conditions, including analog input range and configuration, output coding, power management, and channel sequencing.
功能寄存器的设计及使用是芯片设计的关键，必须正确设置各个功能寄存器的值，才能完成设计要求。
The key of the chip-design is the designing and using of the function register, so we must set the right figure of each function register to achieve the design-aim.
采样速率、滤波器转折频率和输出字速率由AD7763的外部时钟频率与配置寄存器共同设置。
The sample rate, filter corner frequencies and output word rate are set by a combination of the external clock frequency and the configuration registers of the AD7763.
采样速率、滤波器转折频率和输出字速率由ad7760的外部时钟频率与配置寄存器共同设置。
The sample rate, filter corner frequencies, and output word rate are set by a combination of the external clock frequency and the configuration registers of the AD7760.
采样速率、滤波器转折频率和输出字速率由ad7762的外部时钟频率与配置寄存器共同设置。
The sample rate, filter corner frequencies and output word rate are set by a combination of the external clock frequency and the configuration registers of the AD7762.
通过设置812IE寄存器、初始化CAN控制器并将其置为复位模式、配置控制器寄存器并置为正常工作模式等，可实现CAN通讯。
After configuring IE register in AduC812, initializing CAN Contrloller and configuring it into normal modes etc, The communication on CAN Bus began.
通过设置812IE寄存器、初始化CAN控制器并将其置为复位模式、配置控制器寄存器并置为正常工作模式等，可实现CAN通讯。
After configuring IE register in AduC812, initializing CAN Contrloller and configuring it into normal modes etc, The communication on CAN Bus began.
应用推荐