使用计算流体力学的方法，计算增加压力平衡槽后间隙密封中的流场分布。
The distribution of flow field in clearance seal with balanced-pressure grooves is calculated by using the method of computing fluid mechanics.
以计算流体力学(CFD)为基础，采用有限容积法模拟计算了轿车车身的外部流场。
On the basis of computational fluid dynamics (CFD), adopting limited volume method, the external flow field of a car body is simulated.
应用计算流体力学(CFD)方法对转动坐标系下的三维环形密封流场进行了准稳态数值模拟，在此基础上进行了转子动力系数的计算。
Three dimensional annular seal flow field was simulated quasi-steadily with computational fluid dynamics (CFD) method in a rotating reference frame. The Rotordynamic coefficients were calculated.
随着计算机工业的飞速发展，数值计算方法在计算流体力学中得到了广泛的应用。
Along with the development of the computer industry, numerical calculation is widely used in the computation hydrodynamics.
用通用计算流体力学程序FLUENT计算了中国氦冷固体增殖实验包层模块（TBM）冷却剂丧失事故中的冷却剂排放瞬态过程。
The general-purpose CFD code FLUENT is used to calculate the transient process of China helium-cooled solid breeder test blanket module (TBM) under loss of coolant accident (LOCA) scenario.
应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。
The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.
为了预报毂帽鳍的水动力性能，采用计算流体力学软件对粘性流场中毂帽鳍的敞水性能进行计算研究。
In order to predict the hydrodynamic performance of propeller with boss cap fins, CFD software was used to calculate the its open water performance.
基于经典波浪理论，以大型商业计算流体力学软件CFX为平台，可以实现数值造波及波物作用的模拟计算。
Based on the principle of wave, the simulation of wave generator and wave or wave-current forces on circular cylinder is presented by using CFX.
应用计算流体力学理论，给出了长输管线气体泄漏率新的计算方法。
A mathematical model for accidental gas release in long transmission pipeline was given, on the basis of computational fluid mechanics.
这方面的研究是所谓的计算流体动力学或计算流体力学。
This area of study is called Computational Fluid Dynamics or CFD.
以计算流体力学为工具，详细分析计算了流体流过孔板的层流流场分布以及压力降。
Based on computational fluid dynamics, the distribution of laminar flow-field and pressure difference are obtained by numerical simulation on flow through orifice plate in detail.
应用计算流体力学理论给出了长输管道稳态气体泄漏率的计算方法。
A mathematical model of steady state gas release flow rate in long distance pipeline is given by use of computational fluid mechanics.
计算传质学模型由浓度输运方程及其封闭方程和相应的计算流体力学模型组成。
The Computational Mass Transfer(CMT) model is composed of the basic differential mass transfer equation, closing with auxiliary equations and the appropriate accompanying CFD formulation.
分析了计算流体力学的应用前景和应用中的关键问题，并结合具体实例讨论了近年来计算流体力学的进展和计算流体力学在汽车及其零部件设计中的应用。
Trends in CFD application and key points of application are analyzed. Development of CFD in recent years and its application to vehicle design are discussed with some examples.
本文联合使用计算流体力学软件FLUENT和可以计算表面反应的化学反应动力学软件DETCHEM对有逆流换热的微尺度燃烧器进行了数值计算。
In this paper was preformed numerical simulation for micro-scale combustor with counterflow heat exchanger using both CFD FLUENT and surface chemistry subroutine DETCHEM.
笔者在给定加热功率下，利用计算流体力学（简称CFD）和传热学相结合的方法计算了风速管的表面温度。
Surface temperature of an anemometer heated by a given power was calculated by CFD and heat flux analysis.
通过计算流体力学课程的学习，提高研究生对流体力学问题的研究和计算能力，提供一种研究和解决流体力学问题的手段。
By learning the course, the computing capability of postgraduate students could be increased on the fluid mechanics problem and the tools could be provided to research and settle the problem.
用计算流体力学方法计算了芯部压缩气体湍流流动的速度、压力和换热系数的分布。
The velocity, the pressure and the heat transfer coefficient distribution of the compressed gas turbulence flow in the core are calculated by CFD.
随着船舶计算流体力学（CFD）和计算机技术的飞速发展，船舶尾浪的试验与数值研究已经取得一定的进展。
With the development of computational fluid dynamics (CFD) and computer technology, the experimental and numerical researches about ship wake-waves have made some progress.
计算流动显示是近年来在流体力学领域出现的一个新的研究方向，是计算流体力学、实验流体力学和科学计算可视化等领域的结合。
Computational flow imaging (CFI) is a new field of research in computational flow dynamics. It combines computational and experimental flow dynamics, together with visualization techniques.
基于非结构化网格开发了流体力学数值计算平台，在此平台上对一些经典的算例进行了验算，计算结果与理论和实验吻合很好。
The solver is validated in a number of classical flow problems and the results agree well with other experimental data in literature.
运用流体力学的计算理论，论述了在气膜 调偏机中形成均匀稳定的气膜的主要参数的确定和计算方法。
Depending on the theory of hydraulics, this paper describes the method for calculation and determination of the main parameters for establishing smooth and steady air cushion in air-cushion rugulator.
论述了托卡马克等离子体磁流体力学平衡位形重建与计算、不稳定性计算与分析模拟研究中的主要技术。
The main techniques of the simulation of the magnetohydrodynamic equilibrium configures and instabilities in Tokamak plasmas are presented.
论述了托卡马克等离子体磁流体力学平衡位形重建与计算、不稳定性计算与分析模拟研究中的主要技术。
The main techniques of the simulation of the magnetohydrodynamic equilibrium configures and instabilities in Tokamak plasmas are presented.
应用推荐