目的：探讨和分析下颌角部骨折的相关因素。
Objective: to explore and analyse the relative factors of the mandibular Angle fracture.
脑室扩大：侧脑室体部31例，三角部扩大8例。
Ventricular enlarged: body of lateral ventricle 31 cases, triangular part 8 cases.
发现半月板前后角部及其周围组织血管血供丰富的特点。
Rich blood supply was observed in the anterior and posterior angular parts and the peripheral tissues of the meniscus.
角部应力符号沿对角线同号，不同对角线上应力符号相反；
Diagonal stress signs is sameness, but stress signs change along with different diagonal lines.
公知水箱模块都是预先在板材的角部剪掉一块，然后弯折、焊接。
Any water tank module in the prior art is processed through cutting a piece off the corner of a piece of sheet metal first, and then bending and welding.
盒形件拉深主要变形区集中在盒形件角部的法兰和凹模圆角部位。
The main deformation areas of the rectangular box in deep drawing were flanges and the circle-corners of female die in the corners.
结果表明，矩形软接触电磁连铸结晶器角部存在明显的磁场叠加现象；
The results show that the electromagnetic flux overlap aooears distinctly at the corner of rectangular soft-contact mold.
因此，查明角部横裂产生的原因并制定相应的防范措施是非常必要的。
So it is necessary and urgent to determine the reasons for cracking, and take relevant precautions.
通过合理的弯曲工艺，避免了角部过度减薄引起内高压成形过程中开裂。
The excessive thinning at the corners of the workpiece is avoided through a reasonable bending process and then the fracture during IHPF is avoided.
分析了济钢干熄焦焦罐存在的角部开裂、框架横梁和吊耳拉杆变形的原因。
The reasons of corner crack and deformation of frame beam and ear draft of the coke pot of CDQ at Jigang are analyzed.
经过几个月的实验，小方坯角部纵裂废品基本消失，取得了良好的冶金效果。
The longitudinal corner crack scrap of Billets disappeared almostly after four and half months test. Yielded the good metallurgical results.
分析了角部雨檐零件特点及其成形机理，将复合成形分解为简单的弯曲和翻边。
The characteristics of the corner rain eaves parts and their forming principle were analyzed. The compound forming was broken into simple bending and flanging.
本文通过对小方坯角部横裂纹的产生原因进行分析，并提出了相应的解决措施。
By analysing the causes of the transverse corner cracks of continuous casting billets, this article puts forward the relative measures to control the corner cracks.
采用金相显微镜和扫描电镜分析了含铌微合金化钢铸坯角部横裂纹的形成原因。
The optical microscope and SEM were applied to analyze the formation mechanism of transverse corner cracks of Nb microalloyed steel slab.
连铸过程中板坯角部可能出现横向裂纹，这些裂纹严重影响着连铸坯的质量和产量。
The transversal cracks might appear on slab corner positions during continuous casting, which severely affect the quality and quantity of products.
分析了影响板坯角部横裂的结晶器保护渣、二冷水、结晶器、浇注速度等工艺因素。
Factors influencing transverse corner cracks in continuously cast slab, such as mold powder, secondary cooling, processing parameters of the mold, casting speed, etc.
止挡件通过在质量体角部的上方延伸连接件层而形成，或者通过保留半导体层而形成。
Stopper is formed by extending the connector layer, or leaving the semiconductor layer, above the mass body corners.
结论：生物可吸收板双板固定在下颌骨角部和体部骨折早期时可以提供骨折愈合的条件。
Conclusion: Fixation with double bioabsorbable plates can provides enough health condition during the primary period of mandibular Angle and body fracture.
对10 8例患者利用特制钩形角部定位导丝行介入再通，插管成功率为10 0 %。
In 108 cases using the special preshaped guide wire, the success rate of catheterization was 100%.
方法：对21例下颌骨角部和升支骨折患者，经口内切口联合颊部小切口穿刺复位内固定。
Methods 21 cases of mandibular angle and ramus fractures were treated by screwed miniplates placed through an intraoral incision with transbuccal mini-incision.
此外，管线最大曲率、转角、最大应力和弯矩均发生在基坑端角部20%开挖长度的范围内。
Furthermore, the maximum value of curvature, Angle of rotation, stress and moment of flexure of pipeline all appear at the corner of pit with 20% excavation length.
方法对21例下颌骨角部和髁状突颈部骨折患者，采用微型侧壁螺丝刀，经口内微型钛板内固定。
Methods In 21 cases, internal fixations were performed at mandibular angle and condyle fractures with a micro-angular screwdriver through intraoral minimally invasions.
角部横向裂纹(简称角部横裂)是连铸板坯较严重的表面缺陷之一，其对铸坯的生产和质量影响很大。
Transverse corner crack is one of the most serious problems in continuous cast slab. With a great number of cracks the slab will witness serious defects and practical operation is badly influenced.
分析了角部横裂产生的原因，针对不同原因，制定相应的预防措施，可以使连铸板坯的角部横裂大幅度减少。
The paper analyzes the cracking reasons. According to the different reasons, relevant precautions are determined and carried out to significantly reduce the cracks.
西侧月牙状塔楼南北两侧的刀丸状建筑角部，打破了圆柱体的单调和乏味，产生出强烈的视觉冲击和心理震撼。
The bladed corners to the south side of the west crescent turret breaks the monotony and tedium, and brings about a strong visual impact and mental shock.
形状的体量固定在现存两个砖墙体块的端部，围绕院子形成了连续的环状，在它的角部倾斜，以免挡住建筑后面居民住宅的视野。
The L-shaped volume is fixed at either end to two existing brick blocks to form a continuous loop around a courtyard, and slopes down at its corner so as not to block views for residents to its rear.
结论采用微型侧壁螺丝刀经口腔内固定下颌骨角部和髁状突颈部骨折，完全避免了颌面部皮肤切口，尤其对患者的心理安慰，意义重大。
Conclusions Intraoral internal fixation on mandibular Angle and condyle fracture with a micro-angular screwdriver avoided facial incisions thoroughly it was of great significance to the patients.
前面板（120）形成有至少一个无缝角部，前 表面（125）和多个侧表面（126、127）中的两个侧表面在该无缝角部 处相接。
The front panel (120) is formed with at least one seamless corner where the front surface (125) and two of the plurality of side surfaces (126, 127) meet.
前面板（120）形成有至少一个无缝角部，前 表面（125）和多个侧表面（126、127）中的两个侧表面在该无缝角部 处相接。
The front panel (120) is formed with at least one seamless corner where the front surface (125) and two of the plurality of side surfaces (126, 127) meet.
应用推荐