回顾了三十多年来蒙特-卡罗法计算黑体空腔发射率的基本思想和主要算法。
Monte-Carlo method using to calculate the effective emissivity of blackbody cavities in the last three decades was reviewed.
要做到这点，他们运行蒙特卡罗模拟法为成本和收益生成50,000个随机情境——每个是一个潜在的IS P结果。
To do so, they ran Monte Carlo Simulations to generate 50,000 random scenarios for cost and benefits — each a potential ISP outcome.
蒙特卡罗模拟法是一项涉及使用随机数和概率来寻找复杂问题的解决方案的技术。
Monte Carlo Simulation is a technique that involves using random Numbers and probability to find solutions to complex problems.
给定一个棋位，应用蒙特卡罗算法的程序预测每一步走法并进行大量随机走法将会带来什么结果。
Given a position, a program using a Monte Carlo algorithm contemplates every move and plays a large number of random games to see what happens.
使用最频繁的方法是蒙特卡罗模拟法(我将在后面讨论)。
The most frequently used method is the Monte Carlo Simulation (which I will discuss later).
使用标准的蒙特卡罗模拟法对从一项随机、对照的功效试验得到的数据进行了评估。
Evidence from a randomized controlled efficacy trial was evaluated using standard Monte Carlo simulation.
针对材料性能的随机性和裂缝分布的随机性，引入了随机性模型，采用蒙特卡罗法来模拟其随机性。
Aiming at the randomicity of concrete crack, the author adopt the randomicity finite element model and Monte-Carlomethod to simulate the randomicity of material character and crack distribution.
其次，采用应力与强度干涉模型和蒙特卡罗模拟法，解决了可靠度计算公式中复杂积分的计算问题。
Then, the complex integral calculation problem in the reliability model of stress and strength interference was simplified by using the Monte Carlo Simulation Method.
本文采用蒙特卡罗法可方便地解决这一问题，并结合工程实例予以说明。
This paper solves the problem by using Monte Carlo method, and illustrates it through practical engineering examples.
给出了PIC法的计算方法，指出PIC法必须与蒙特卡罗碰撞(MCC)模型和鞘层模型相结合，才能更准确地对ICPS进行模拟。
Calculation method of PIC is given. We suggest that only when PIC is combined with Monte Carlo collision (MCC) and sheath model, can it more precisely simulate ICPS.
概率模型和伪随机数发生器是蒙特卡罗法中两个很重要的组成部分，它们决定了蒙特卡罗法的正确性和计算精度。
Probability models and pseudorandom number generators are two important component part of Monte Carlo method, and they influence the accuracy and correctness of the calculation.
最后列举了不确定性分析的方法，即蒙特卡罗法、泰勒简化法、概率树法和专家判断法。
At last, some methods of uncertainty analysis are listed, such as Monte Carlo method, Taylor method, probability trees and expert judgement method.
本文建立了用改进的活化法与蒙特卡罗计算相结合测量中子反照率的方法。
A new method was developed to measure the neutron albedo by the Monte Carlo code and the activation method.
本文提出了一种用蒙特卡罗法对路面不平度函数进行抽样的方法，只对相位随机抽样。
In this paper, the Monte Carlo method which only samples the phase is used to produce road surface irregularity.
本工作研究放射性废物快速非破坏性检测装置的数据分析方法和检测装置探测效率的蒙特卡罗法计算。
The research concerns in the data analysis and detection efficiency calculation based on Monte-Carlo method for non-destructive assay radioactive waste measurement instrument.
采用均匀随机数蒙特卡罗法计算多重积分是一种简单而有效的方法，其程序结构简单，易于编制和调试。
Monte Carlo method by adopting uniform random number is a simple and effective way to calculate multiple integrals, its structure is simple and easy to program and debug.
按照试件的实际配比计算出各种粒径骨料的数目，采用蒙特卡罗法对混凝土骨料进行随机投放，生成试件的随机骨料模型。
The Monte Carlo method was used to generate the random aggregate model, and the number of aggregate of different sizes was determined according to the actual mix proportion.
采用蒙特卡罗法针对本文实验系统进行了流光电晕放电的模拟。
The streamer corona discharge in the experiment system was simulated with Monte Carlo simulation.
为了验证双向蒙特卡罗法模拟热辐射传递，与文献中其它方法计算结果进行了比较。
To validate the Bidirectional Monte-Carlo simulation for radiative heat transfer, the solution obtained from this method is compared with that from other methods.
在算法改进方面，提出了基于蒙特卡罗法的配电系统模糊可靠性评估方法。
In the part of improved algorithm, a Monte Carlo based approach for fuzzy reliability evaluation is presented.
建立了用蒙特卡罗和光线跟踪法计算高功率固体激光系统棒状放大器能量沉积分布的模拟程序。
The ray tracing and Monte Carlo method are applied to calculate the distribution of deposited pumping energy within a rod amplifier of the high power solid state laser system.
首先介绍了工程结构可靠度理论及分析计算的若干方法，重点阐述了FORM法和蒙特卡罗法。
First, the basic theory and several computation analysis methods of reliability are discussed, and the First Order reliability method (FORM) and Monte-Carlo method are emphasized.
针对换热器的失效分析，考虑几种主要参数的不确定性和随机性，应用蒙特卡罗模拟法抽样计算了服从某种特定分布的随机变量。
Through failure analysis of heat exchangers and in consideration of uncertainty and randomness of several main parameters, the random variables are calculated by Mote-Carlo modeling.
采用蒙特卡罗法设计车辆转弯行为仿真模型，并提出了局域路网交通量与OD矩阵估计的集成仿真方法。
Monte Carlo Stochastic Modeling Method is adopted to design vehicle turning behavior module, and a simulation model integrating link traffic flow and od matrix estimation is established.
在用蒙特卡罗法进行仿真研究(例如进行测量不确定度评定)时，常常需要发生多个非高斯型互相关的随机数。
In Monte Carlo simulation such as the measurement uncertainty evaluation, it is often necessary to generate correlated multi-non-Gaussian random observations.
为了减少随机抽样的次数并保证蒙特卡罗法的数值模拟精度，对比引入了重要抽样法和拉丁超立方体抽样方法；
To reduce sampling number and assure simulation precision, Importance Sampling method and Latin Hypercube Sampling method are coupled with Neumann expansion SFEM respectively.
将方差剖析法、归归剖析法、以及蒙特卡罗模拟工具试用于一个精心挑选的小型项目，并取得了幻想的结果。
ANOVA, regression analysis, as well as the Monte Carlo simulation tool are applied to a carefully selected small project with desirable results.
考虑随机波浪作用，应用蒙特卡罗模拟法和有限元方法对结构进行可靠性分析。
With the responses of the platform under random wave loadings, the structural reliability analysis using Monte Carlo Method and FEM were carried out.
不同于基于几何光学理论的闪光灯计算和设计方法，采用了蒙特卡罗光子追迹法来分析闪光灯的结构设计。
Instead of the geometrical optics approaches, the Monte Carlo photon tracing method was used to analyze the structure design of flashlight.
不同于基于几何光学理论的闪光灯计算和设计方法，采用了蒙特卡罗光子追迹法来分析闪光灯的结构设计。
Instead of the geometrical optics approaches, the Monte Carlo photon tracing method was used to analyze the structure design of flashlight.
应用推荐