研制了一种铝蜂窝芯材拼接胶膜。
A film adhesive for bonding aluminum honeycomb core materials was develope.
常温连续发泡，无胶水复合技术，高强度芯材。
Continuous foaming at normal temperature, no glue compound technology, high-strength core material.
介绍不同芯材与不同板型的彩钢夹芯板的特点及应用。
The characteristics and application of colour steel sandwich panels with different core materials and different plate types are introduced.
主要用作微胶囊芯材、吸附剂，吸附各种功能性物质。
It may be used as the core of fine capsules, adsorbent for adsorbing different functional substances.
而泡沫铝的潜在用途之一是作为泡沫铝夹芯板的芯材使用。
One of the potential USES of foam aluminum is used as aluminum foam sandwich.
由于彩色钢板和芯材岩棉均为非燃烧体，帮其防火性能极佳。
Because both color steel plate and sandwich rockwool are non-combustible, its fireproof property is very good.
是聚苯乙烯的还有聚氨酯无法对比的，它的芯材是不可以燃烧的岩棉。
Is there a polyurethane polystyrene core material can not be compared, it is not burning rock wool.
芯材可采用无机质（玻镁板、石膏板）、岩棉、硅酸铝棉或玻镁棉。
The core can adopts inorganic substance (magnesium, plasterboard), rock wool, aluminum silicate wool or magnesium.
保温芯材不仅起到保温节能的作用，而且由于轻质，可降低屋面重量。
The insulation material core plays a part in heat insulation and energy saving, and reduces roof weight due to its lightweight.
以螺恶嗪为芯材，用原位聚合法制备了蜜胺脂为壁材的光致变色微胶囊。
The photochromic microcapsules with melamine resin as wall material and spirooxazine as core material were prepared by situ polymerization.
现存的泡沫铝夹心板的制备方法很多，但均为先制备芯材再进行连接的方法。
There are lots of manufacture methods, but all these methods are to prepare core material first and then join them to skins.
研究一种新型复合夹芯结构，即低密度泡沫芯材与菱苦土柱状结构复合芯材。
This paper discussed a new structure of compound samdwich which is composed of foam with lower density and columned magnesite.
随着壁材总浓度的增大，芯材乙酸油酯包覆率呈现先上升后下降的变化趋势。
It was found that the encapsulation rate increased with decrease in concentration of wall material.
制备了用于聚氨酯真空隔热板的开孔硬泡芯材，该泡沫芯材的开孔率达95%。
A open cell polyurethane rigid foam for vacuum panel core material was prepared. The open cell percent of the core material is about 95%.
采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。
This feature makes it possible to produce the filler by isometric transformation of thin sheet through local bending without material stretching.
复合材料界面结构由芯材扩散层、激冷凝固层、方向性生长层和胞状晶粒层组成。
The interface structure of composite consists of core material diffusion layer, chilling solidified layer, directional growth layer, and cellular granular layer.
介绍了以乙基纤维素为壁材，无机变色材料为芯材，油相分离法制备微胶囊技术。
The technology of microcapsule preparation by oil phase isolation method was introduced, where ethyl cellulose was used as wall material and inorganic thermochromism material as core material.
以己二酰氯-三乙烯四胺为壁材，四氯乙烯为芯材，通过界面聚合法制备微胶囊。
Microcapsules were prepared by interfacial polymerization, with adipoyl chloride-triethylenetetramine as wall material, and tetrachloroethylene as core material.
由泡沫铝芯材与金属面板构成的夹心结构具有轻质、高强度、良好的减震性等优点。
Metal skin-Al-foam core sandwich panels have unique characteristics such as light weight, high stiffness and well damping properties.
将PPI制成小丸形式的芯材，小丸尤其用延释改进层和滞后时间控制层的组合包衣。
The PPI is formulated into a core material in the form of pellets, which are coated i. a. with a combination of a delayed release modifying layer and a lag time controlling layer.
以明胶和阿拉伯树胶为微胶囊的壁材，玫瑰香精为芯材，采用复凝聚法制备香精微胶囊。
The fragrant microcapsule was prepared with gelatin and Arabic gum as the wall material and rose essence as core by compounding and coagulation.
研究采用了以三聚氰胺-甲醛为壁材，正十四烷为芯材原位聚合法制备微胶囊相变材料。
Microcapsules loaded with tetradecane as the core material are prepared by in-situ polymerization methods.
其原理是铝材(板)芯材与高分子膜在连续高热高压作用下牢固的粘合，形成平整板面。
It can form a plain panel by biding aluminum material and high polymer film together under constantly high temperature ang pressure.
介绍复合板的种类、结构型式、性能、所用芯材性能、胶粘剂种类和性能，及其制造工艺。
The sort, fram type, performances, properties of core mater ia ls, kind and properties of used adhesives and fabrication process for the composite sandwich panels were introduced.
本文探讨了以玫瑰-龙涎-檀香复合香精为芯材的壳聚糖纳米胶囊在纺织品上的应用性能。
The application performance of chitosan rose-amber-sandal nano-capsules was discussed in this paper.
它是采用复凝聚法，以稀禾定为芯材、以明胶和阿拉伯胶为壁材的缓释型微胶囊水悬剂。
The slow-release microcapsule water suspension agent uses the sethoxydim as core material by complex coacervation method and uses the gelatin and the arabic gum as wall material.
以尿素-甲醛为壁材，四氯乙烯为芯材，通过两步原位聚合法和一步原位聚合法制备微胶囊。
Microcapsules were prepared through two-step and one-step in situ polymerization method, with urea-formaldehyde as wall material, and tetrachloroethylene as core material.
以密胺树脂及改性密胺树脂为壁材，正十四烷为芯材，制备一种具有复合结构壁材的相变微胶囊。
The pure cotton fabrics finished by perfume compound microencapsulation with melamine resin as shell material were described.
以辣椒红色素为芯材，变性淀粉和明胶为壁材，糊精为填充剂，研究微胶囊化辣椒红色素的制备工艺。
Microcapsules of paprika oleoresin were prepared by spray-drying technology using paprika oleoresin as the core material, modified starch and gelatin as the wall materials, dextrin as the filler.
预测典型缝纫泡沫芯材的面内剪切模量，进行夹层结构的面内剪切试验，试验结果与预估结果吻合较好。
The prediction result of the in plane shear modulus of a typical stitching foam-core sandwich composite was found good agree with the experimental results.
应用推荐