带钢经脱脂处理其表面油杂质去除率达98%、铁杂质去除率达95%。
Through degrease disposing, 98% of greasy impurity and 95% of iron impurity attached on the surface of steel strip can be removed.
冶金系统中的氧气管路系统中，宜选用经过严格脱脂处理，法兰连接的针型阀。
Metallurgical oxygen system pipe system, should use strict degreasing treatment, needle valve flange J29 Angle Pressure Gauge valve connection.
脱脂及酸洗处理欠好会形成镀层附着力欠好，镀不上锌或锌层掉落。
Degreasing and pickling treatment will lead to the formation of good adhesion of the coating is not good, not on the zinc or zinc coating layer.
表面处理：脱脂，酸洗，磷化，静电，喷塑。
Surface processing: degreasing, acid washing, phosphating, Static, powder coating.
被排放的废水中仍然含有大量脱脂剂，如果直接排放将造成试剂的浪费，同时也为水处理增加了负担。
Since the wastewater contains large amount of degreasing cleaners, directly dispose will lead to the waste of detergent and the overburden of water treatment.
材料采用优质冷轧钢板，表面处理采用脱脂、酸洗、磷化、静电喷塑。
The material are the high quality cold steeling rolling plate, surface processing with degrease, acid washing, phosphating, static spraying plastic.
本研究以低温脱脂豆粕为原料，利用微波对其进行前处理，以提高浸提效率。
The research takes the defatted soybean meal as raw material, pre treatment by microwave to improve the extracting efficiency.
研究了处理时间和组成对脱脂奶粉抗结块性能的影响。
The effects of treatment time and compositions on the caking-resistant characteristics are studied.
马尾松板材经脱脂保色处理后，基本保持了原有色泽，改善了木材干燥性能、加工性能、油漆性能、增加了木材的稳定性。
After degreasing and colour retaining process, the masson pine panel will keep its original colour. The performances of drying, machining and painting, and panel stability were also be improved.
竹纤维经过了彻底的脱脂、脱糖、脱蛋白处理。
Bamboo fibre after thorough degreasing, take off sugar, to take off the protein processing.
本文将就轿车预处理工艺中应用的脱脂、表调、磷化、钝化等材料的最新情况和未来发展趋势进行概述。
The present situation and future trend about degreasing, surface conditioning, phosphorizing, passivating in car pretreatment are outlined in this paper.
通过干热处理对脱脂豆粕中脂肪氧合酶进行灭活。
Lipoxygenase in defatted soybean meal was denatured by dry heating treatment.
提出了一种适用于各种金属板贴塑的前处理工艺，着重介绍了脱脂和磷化的工艺配方、特点及槽液的维护。
Pretreatment process for PVC laminating on different thin metal sheets was introduced. Formula, strengths and maintenance of degreasing and phosphating process were emphasized.
预处理采用电解脱脂、电解酸洗、直线溢流漂洗工艺。
Electrolysis degreasing, electrolysis pickling and straight line flooding fulling process are adopted while pre-treatment.
表面处理：脱脂，除锈，防锈磷化，喷塑。
Surface finish: Degreasing, rust, rust phosphating, powder coating.
BJ- 1001系金属表面处理用的强碱性脱脂剂。
BJ-1001 is alkali degreaser used for surface of metal treatment.
在喷涂前，对基本表面进行清洗、脱脂和表面粗糙化等预处理是喷涂工艺中一个重要工序。
Spraying at the former, the basic surface cleaning, degreasing and surface roughness, such as spraying pretreatment process are an important process.
介绍了锌合金压铸零件的前处理工序及钝化工艺，前处理工艺包括抛光、脱脂除油、活化等。
The pretreatment and passivation of zinc alloy parts were introduced. The pretreatment process includes polishing, degreasing and cleaning, activation and so on.
简要介绍了汽车用铝板的涂装前处理工序，如脱脂、表面调整、化成(磷酸盐处理)等，并对其工序的处理要点作了分析。
This paper presents process of pretreatment such as degrease, surface adjustment, phosphating, and analyses the essentials of the working procedure.
本文主要研究马尾松板材的脱脂工艺、脱脂后马尾松板材的干燥工艺以及处理材和素材的材性对比。
The process of the Deresination, Drying and Properties Contrast of Masson's Pine Boards were studied in the paper.
该方法以茶渣为原料，经过干燥、粗粉碎、酸处理、碱处理、脱脂、脱色、干燥后并粉碎，制得不溶性茶渣膳食纤维。
The insoluble tea-leaf dietary fiber is prepared from tea leaves serving as raw materials by drying, coarse grinding, acid treating, alkali treating, degreasing, decoloring, drying and crushing.
磁粉芯经脱脂、热处理后纳米晶粉颗粒的间隙减小，使得磁粉芯涡流损耗上升和磁粉芯中心频率下移。
Degreasing and heat treatment can reduce the gap among nano-crystalline core particles, increase the vortex flowing loss and move down the frequency of core's center.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
应用推荐