该武器能在很短时间内产生高能脉冲，并进而产生瞬间数千伏电压聚增以破坏半导体设备。
This weapon generates a very short, intense energy pulse producing a transient surge of thousands of volts that kills semiconductor devices.
本文研究了聚丙烯酸丁酯／聚甲基丙烯酸乙酯核／壳结构弹性体粒子对HIPS的增韧作用，提出了一个新的增韧机理。
The toughening of HIPS is studied by blending it with a polybutylacrylate/polyethylmethacrylate core/shell structure elastomer particles, an a new mechanism of toughening isproposed.
环氧树脂是聚硫密封胶常用的增粘剂，在聚硫密封胶中加入环氧树脂可以起到明显的增粘作用。
Epoxy resin is the common tackifier for polysulfide sealant. Adding epoxy resin into polysulfide sealant can exert an auxiliary effect on viscosity increasing.
以液体聚硫聚脲齐聚物来增韧环氧-聚酰胺体系，用DMTA和SEM研究了固化后环氧树脂的形态结构、相分离程度和增韧效果。
The measurement of DMTA and SEM was used to study the morphology and structure of the cured epoxy, identifying the degree of phase segregation and the effect of toughening in the cured epoxy.
对聚氧化乙烯(peo)为粘合剂硝酸酯增塑的高能推进剂配方力学性能进行了研究。
The mechanical properties of propellants formulation, which contains PEO binder and is plasticized by nitrate ester were studied.
液态聚硫橡胶增韧的环氧树脂胶表现出良好的抗冲击性能和抗弯曲性能；
Epoxy resin toughened by liquid polysulfide rubber exhibits good anti-impact performance and anti-bend performance.
目的探讨脂肪醇聚氧乙烯醚(aeo)9水溶液增稠条件。
Objective To study the conditions of thickening AEO 9 solution.
合成了以羟基封端的脂肪族聚碳酸酯-聚乙基醚碳酸酯二醇（PEECD），并用于环氧（EP）树脂的增韧。
One kind of hydroxyl - terminated aliphatic polycarbonate, i. e. poly(ethylene ether carbonate) diol(PEECD) was synthesized and used to toughen epoxy resin (EP) .
研究了题述增稠剂(M - CMHPC)在聚醋酸乙烯乳液(PVA)中的增稠效应。
The thickening effect of the title thickener (M-CMHPC) in polyvinyl acetate emulsion (PVA) has been studied.
采用配比合适的均聚和共聚pp为基础树脂，以EPDM为增韧剂，自制无机填充料a为填料制得性能符合要求的保险杠料。
With proper homopolymerized and copolymerized PP as base resins, EPDM as toughener, self-made inorganic filler a as filler, compounds for bumper with desirable properties were prepared.
用液体丁腈橡胶、聚丁二烯、聚醚、硅橡胶、不饱和聚酯和多种乙烯基酯树脂为改性剂，研究了它们对DAIP树脂的增韧作用。
The toughening of DAIP resin with liquid nitrile-butadiene rubber, polybutadiene, polyether, silicone rubber, unsaturated polyester and vinyl resins was investigated.
研究了反式-1,4 -聚异戊二烯(TPI)的力学性能与交联的关系及不同交联度的TPI对PP的增韧效果。
Relationship of cross linking and mechanical properties of trans 1, 4 polyisoprene (TPI) and toughening effects of TRI on PP were studied.
我想创造一个真正的高聚模式，我需要使用边缘增厚，以使我的边轮，好看。
I wanted to create a really high poly model so I need to use edge thickening in order to make my edges round and nice looking.
其复合材料的冲击强度明显提高，经聚砜增韧后提高了90%。
The impact strength of their composites increases obviously and, being toughened with PSF, by a factor of 90%.
热塑性塑料阀门。压力试验方法和要求。第2部分：聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门试验条件和。
Thermoplastics valves - Pressure test methods and requirements - Part 2: test conditions and basic requirements for PE, PP, PVC-U and PVDF valves.
本文制备湿固型MDI- 聚醚基聚氨酯热熔胶，研究了MDI-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。
The hot-melt moisture cure PU adhesives have been prepared. The effects of the structure of the MDI-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.
制备了一种以聚丙二醇增韧改性的环氧树脂为母体，接枝丙烯酸单体所形成主体树脂，经离子化反应得到阴极电泳涂料。
A cathodic electrodeposition coatings was prepared employing a polypropylene glycol toughness-enhanced epoxy resin as matrix and acrylic monomers as grafted copolymer.
一种高强度管道，由聚丁烯材料组成，聚丁烯材料中添加有添加剂，添加剂为增韧剂、或者光稳定剂、或者抗氧化剂、或者颜料。
A high strength pipeline is formed by polybutylene material, wherein the polybutylene material is added with additive, and the additive is toughening agent, light stabilizer, antioxidant or pigment.
因此，迫切需要对海上注聚井的欠注、堵塞机理以及解堵增注技术进行研究。
Therefore, there is an urgent need of the survey on offshore injection well plugging, less injection mechanism and Broken Down injection technology.
冲击实验结果表明二种PU预聚物均能提高PF的冲击强度，增韧效果与PU质量分数WPU有关；
The results of impact experiments show that impact strength of PF is improved and improvement lever is related to WPU;
采用就地聚合工艺所得的补强胶乳克服了预聚并用工艺所容易造成的增稠现象；采用预备并用工艺所得的补强胶乳仍具有良好的成膜效果。
The results showed that NR latex could be reinforced by PS resin emulsion effectively, the reinforced NR latex which used in situ polymerization technology overcomed the densification phenomenon whi…
采用就地聚合工艺所得的补强胶乳克服了预聚并用工艺所容易造成的增稠现象；采用预备并用工艺所得的补强胶乳仍具有良好的成膜效果。
The results showed that NR latex could be reinforced by PS resin emulsion effectively, the reinforced NR latex which used in situ polymerization technology overcomed the densification phenomenon whi…
应用推荐