提高尺寸稳定性。良好的耐磨性。
在这种情况下，现代性明确的意思耐磨性。
上述所有，耐磨性的因素是证明了迪奥的结果。
Above all, the wearability factor is proven by Dior's results.
具有很好的耐磨性、弹性、扯断强度及伸长率。
Has good abrasion resistance, elasticity, tensile strength and elongation.
这些材料主要的特点是：绝缘性好，耐磨性强。
Such materials are chiefly characterized by good insulation and high resistance to wear.
坚韧的PVC 基材，高耐磨性和耐化学腐蚀性。
Strong PVC based material, good wearproof and chemical erode resistant property.
研究了加热温度对高合金耐磨铸铁耐磨性的影响。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
它提供了更高的耐磨性比钨在硬质合金牺牲一些韧性。
It provides higher abrasion resistance compared to tungsten carbide at the expense of some toughness.
钨能进步钢的红硬性和热强性，并能进步钢的耐磨性。
Tungsten can improve the hardness and thermal strength of steel, and can improve the wear resistance of steel.
选择性使用和布局调质结构钢获得了极优的耐磨性和强度。
Selective use and placement of quench and tempered construction steels provide excellent wear and strength properties.
对影响漆膜耐磨性测定的因素进行了探讨，并提出了相应的对策。
This paper discussed the factors influencing abrasion resistance of film, and gave corresponding countermeasure.
研究了石墨粒子的大小、分布、含量对机械性能及耐磨性的影响。
The effects of the size, distribution and content of graphite particle upon mechanical properties and wear resistance are studied.
钨铬钴合金面耐磨性优于13CR楔板，而且更易于维修和更换。
Stellite face will wear less than the 13 CR wedge, which can easily be repaired or replaced.
这表面有极高的硬度（60局。），耐磨性和耐腐蚀性，低摩擦系数。
This surface has extreme hardness (60 RC. ), excellent wear and corrosion resistance, and low coefficient of friction.
表示，水溶性漆的环保性确实很高，但其耐磨性、抗污性能相对较弱。
Said really high environmental protection water soluble paint, but its wear resistance, anti pollution performance of relatively weak.
然而，在某些应用条件下，钛合金的硬度低，摩擦系数大，耐磨性差。
However, in some application conditions, low hardness, big friction coefficient and poor wear resistance confine its extensive application in engineering.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
For carbide, glass, ceramics, stone, precious stones and other heavy-load cutting, grinding wear resistance.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
For carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance.
同样，整个带只能作为其最薄弱的部分，因此足够的耐磨性也必须被要求联合。
Again, the whole belt can only be as good as its weakest part, so adequate abrasion resistance must also be asked of the joint.
介绍了生物几何非光滑理论及激光毛化技术在提高轧辊耐磨性方面的应用情况；
Organism unsmooth theory in geometrical morphology is introduced first, and laser texturing techniques applied in increasing roll surface wearability is also described.
齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
文件的硬(60rc)高强度铝合金管提供了一个平稳无腐蚀密封面和良好的耐磨性。
The file hard (60rc) high strength aluminum alloy tube provides a smooth corrosion free sealing surface and excellent abrasion resistance.
丝素整理能够改善棉织物的尺寸稳定性、耐磨性、 抗折皱回复性、抗弯刚度等性能。
The finishing can improve the shrinking rate, wearability, crease - resistant and bend - resistant of the cotton fabric.
合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。
The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
低碳钢适用于以下情况：工具机身，把手，模座及其它不要求强度和耐磨性的类似情况。
Low carbon steels are well suited for the following applications: tool bodies, handles, die shoes, and similar situations where strength and wear resistance are not required.
作为合金元素加入钢中可使钢合金化，增加钢的强度、硬度、延展性、韧性和耐磨性等。
As an alloy element, silicon manganese can alloy the steel, strengthen the intensity, hardness, malleability toughness and wearability of the steel.
作为合金元素加入钢中可使钢合金化，增加钢的强度、硬度、延展性、韧性和耐磨性等。
As an alloy element, silicon manganese can alloy the steel, strengthen the intensity, hardness, malleability toughness and wearability of the steel.
应用推荐