描述了系统的硬件构成和软件实现。
It is described that the configuration of the hardware and the development of the system software.
论文讨论了系统的总体构成方案，确定了系统的硬件构成。
This paper discussed the overall composition scheme of the system and confirmed the systematic hardware.
一个控制系统设计的核心是控制系统的硬件构成与软件实现。
The key parts of the control system design are the hardware composition and the software realization.
本文讨论了空间电源配电部分监测系统的硬件构成和软件设计。
The paper presents hardware platform and software of the monitor system of power distributed system used for space station.
详细阐述了系统的硬件构成和软件设计以及生命参数信号的采集与处理。
The hardware structure and software design are discussed. The life parameters signal sampling and processing are also analyzed.
阐述了系统的硬件构成和软件模块的设计及CAN总线网络接口的实现。
The composition of the system hardware and the design of software blocks and the achievement of CAN interface are described.
重点阐述了系统的硬件构成、各部分的主要作用及系统软件的设计过程。
The hardware structure of the system, the main function, and the process of the system software design are expounded emphatically.
分析了该系统的硬件构成和基本原理，并对其标定和测量原理进行了讨论。
Then the hardware and common principle of the system are analyzed, the demarcating and measuring principle of the system are discussed.
本方案对该系统的硬件构成、软件技术、接口、联网等方面作了总体设计。
The hardware structure, software technology, interface, and network connection of the road monitoring system were designed in the scheme.
介绍了整个系统的硬件构成和软件设计流程，并详细阐述了直线插补算法。
The hardware structure and the software design were introduced, and the straightline interpolation algorithm was described in detail.
介绍了电台电性能自动测试系统的硬件构成及软件程序设计与实现的方法。
Design of automatic test system to test the radio, including the hardware and software, is introduced.
系统的硬件构成，主要有显微镜成像系统、数字摄像机、三维自动载物台。
The hardware of system includes microscope system, digital camera and 3d automatic objective table.
本文介绍了试验台的工作原理，并详细论述了该测试系统的硬件构成和软件设计。
The operational principal of the test-bed was introduced and the hardware structure and software design of the testing system was discussed.
介绍基于AD 7755芯片的学生公寓电能计量管理系统的硬件构成和软件设计。
The hardware and software design of electricity power measure and management system based on AD7755 were introduced in detail.
该文研究了可重写光盘机DSP数字伺服控制的问题，给出了数字控制系统的硬件构成。
The problems are studied about the digital servo using Digital Signal Processor (DSP)for rewritable optical disk drives, and the system scheme is presented.
鉴于以上分析，文章给出了基于空间域数字图像处理的煤岩分析系统的硬件构成，软件介绍。
Based on the above analysis, the article gives coal analysis system's hardware structure and software algorithm, and this system is based on spatial digital image processing.
研制开发了高真空排气过程微机实时控制系统，并对该系统的硬件构成和软件开发作了介绍。
Constant POwer control rule is also presented. The hardware and software in the microcomputer real-time high-vacuum exhausting system is introduced.
介绍了离子膜烧碱工艺中紧急停车控制系统的硬件构成及组态软件，并阐述了其运行调试方法。
The hardware components and software configuration for emergency shut-down control device in ion-exchange membrane caustic soda production are introduced, and the debugging modes are described.
重点阐述了系统的硬件构成及软件设计流程，并简单介绍了基于此系统的用水管理系统的设计。
Focuses on the system's hardware and software design processes, and gives a brief introduction about the design of the management system of water charges.
介绍了其焊接原理及整机的构造设计方案，并给出了焊接过程控制系统的硬件构成和软件结构。
The elements and the whole sets of construction design of the automatic steel-pipe electric welding machine were introduced. The composition of hardware and software of the systems were also designed.
本文详细介绍了智能设备这方诊断系统的硬件构成及软件，并介绍了增强系统抗干扰能力的方法。
This paper gives the hardware structure of remote diagnosing system and software, and it produces the method of enhancing reinforcing capacity.
分析和讨论了该系统的硬件构成、基本工作原理、软件编程和在实验中遇到的一些问题及解决方案。
Analyze and discuss the hardware structure, the basic operational principle, the software program of the system and the problems in the experiment, including their resolutions.
本文首先介绍精密热压焊系统的组成结构及工作原理，然后阐述了控制系统的硬件构成及软件系统。
Firstly, this paper introduces the structure and working principle of precision hot pressure welding system, then the hardware and software of control system is introduced.
介绍了基于PMAC的开放式数控系统在栽剪机中的应用，论述了数控系统的硬件构成和工作原理。
This paper introduces the application of PMAC numerical control system in clothes cutter machine. Hie hardware structure and working principal of the numerical control system is described.
介绍了一种薄壁管件快速切割机的结构和工作原理，分析了相应控制系统的硬件构成及软件实现方案。
The structure and principle of a Rapid Auto-Cutter of thin tube is introduced, the relevant hardware and software of the control system are analyzed.
讨论了GPS和航位推算系统两种定位技术，给出了基于这两种定位技术的车辆定位系统的硬件构成。
Two kinds of position technologies such as GPS and dead reckoning system are discussed, The hardware frame of vehicle position system based on two position technologies is proposed.
介绍了线结构光测量系统的数学模型，以及测量系统的硬件构成，论述了线结构光传感器的标定方法和步聚。
The math model and the hardware structure of the Structrued light 3-D profile measurement system are introduced, and the methods and the steps of calibration for camera are domonstrated.
介绍了磁悬浮飞轮的测试系统的硬件构成和软件实现。介绍了CPCI的工业控制计算机以及数据采集的硬件。
This paper introduces magnetic suspension flywheel's hardware configuration and software realization, and introduces CPCI industrial control computer, data acquisition CARDS.
本文开发了基于工控机和步进电机运动控制器的经济型数控火焰切割机系统，介绍了系统的硬件构成和软件开发。
This paper introduces the NC system of a flame cutting machine based on the industry personal computer and the stepping motor.
介绍了系统的硬件构成及工作原理，详细分析了S3924- 512 Q图像传感器的结构、工作原理和特点。
The hardware and operating principle of this system are introduced, and the structure, principle and characteristics of S3924-512Q image sensor are analyzed in detail.
应用推荐