空间数据库建库流程是数字地质调查系统总体技术流程的一个重要组成部分。
The process flow of building a spatial database is very vital to the general technical process of the digital geological survey system.
所设计的高性能的系统控制器硬件和实时变结构软件算法的实现，可以满足系统总体技术要求。
The designed high performance hardware and real time variable structure of software modules can meet the technical requirements of the system.
由于采用了分散式的总体结构，便于安装到现有设备上，对现有设备的测量系统进行技术改造。
Using distributed overall structure, this system can be easily installed to a device, of which the measuring system needed technical upgrading.
把光纤技术引入电流互感器的设计中，介绍了光电式电流互感器的优点和总体设计方案，详细论述了系统的研制。
Optical fiber technology is introduced to CT design, advantages and design scheme of OECT are presented, and development of system is particularly discussed.
文中提出了系统的总体结构，分析了数据库接口和访问优化技术，描述了船舶调度模型和其中关键问题的解决方法。
In the paper, the overall structure is presented, the database access interface and technicals are analyzed, the dispatching mode and solution of the key problems are described.
在此基础上提出了该系统的总体设计，包括功能体系结构，并对分布式网管系统的关键技术进行了研究。
And the overall design model of system based on this investigation put forward, including function architecture, and does research the key technique of the distributed NMS.
对于在分布计算环境中，利用分布式对象技术建立的分布式冗余服务系统的总体框架进行介绍。
Introduces the total frame of distributed redundant service system, which is built by use of distributed-object technology in distributed-computing environment.
详细分析了系统的设计目标、总体结构和实现的关键技术，并给出了数据转换构件和消息构件的设计。
The paper analyzes the final targets, whole structure and key technologies of system in detail, and gives design of the data conversion component and message component.
主要研究土地利用总体规划信息系统的设计、实现及相关的一些技术问题。
The design, implementation and its related technical issues of the overall land use planning information system are mainly researched.
结合国内外研究情况，分析了水火电竞价上网的区别和系统总体设计的技术要求和建设原则。
Unifying the domestic and foreign research situation, it has analyzed the water thermal power tendering surfer difference and the system design specification and the construction principle.
作者对其系统总体设计、具体模型、关键技术与问题进行了探讨。
This article discusses the overall design, specific model, key technologies and existing problems of the system.
在此基础上为建立测量基准的传递方法、形成系统的光电侦察平台总体检测技术提供必要的准备和基础。
To set up transmission measurement method datum to form general measurement technique of systemically photoelectric reconnaissance platform, the static and dynamic angles were measured.
重点介绍系统的总体结构、自动语音流程、功能设计、关键技术和应用效果等。
It was focused on the overall structure of the System, automatic voice processes, functional design, and applied effect of key technologies etc.
叙述了云南省环保热线系统的总体设计，集成的先进技术，预期目标和建设情况等。
The general design and integration advanced technology and prospected objectives and construction situation of reporting hotline system on environmental protection of Yunnan province are presented.
为此根据数据仓库系统总体框架，提出数据仓库系统中各主要组件的实现技术和方法。
So the implement technology of every main component of data warehouse was proposedbasedon the system collectivity architecture of data warehouse.
应用可靠性技术，完成了匹配台控制系统硬件软件总体设计、部分接口与保护电路设计。
Through applying reliability technology, completed the hardware & software scheme of match board control system and the design of part of interface and protection circuitry.
详细分析某型声纳目标模拟系统的技术指标，在此基础上提出该模拟系统的总体设计方案，并对设计方案进行了论证和性能分析。
Analyzing the technical parameters of the sonar target simulator, based on which proposing the whole design scheme with investigation and performance analysis.
介绍了一个工程制图组合体CAI系统设计思想、总体设计方案和技术实现的方法与手段。
The design ideas and schemes, technical ways and means during development of the CAI system (combination-solid part) are introduced in this paper.
提出了系统的目标、系统的设计与开发原理，包括系统规划、总体设计、关键技术等。
The aim , design and exploitation of system such as system layout, design as a whole and key techniques of the system is expressed.
通过分析城市新区需求，确定了城市新区网络综合服务系统的总体功能结构、技术架构和系统模块划分。
Confirm the general structure of function, technical framework and the modularization of system with the analysis of the request for the new city zone.
分析利用远程网络对机械臂进行远程控制的主要技术，并介绍远程控制系统的设计方法和总体结构。
Analyzed the technologies of remote control on the robot arm with the network, and introduced the design of network remote control system and the total structure.
介绍了基于BOM的产品成本计算方法的理论建模、系统的总体设计方案、功能设计以及系统实现的关键技术。
Introduces the theory modeling based on products cost computing method on the basis of BOM, overall plan of design, function designation and key technology of the system.
介绍了利用计算机技术开发管道焊接施工管理系统的设计思想、系统的总体构成和特点。
The design concept, overall configuration and features of pipeline welding management system developed by utilizing computer technology are introduced.
本文介绍了杭州汽轮机厂计算机集成制造系统HTW - CIMS的总体方案以及开发和应用该系统时遵循的技术路线。
In this pape, the overall plan of Hangzhou. Turbine Works Computer Integrated Manufacturing System (HTW-CIMS) and technical line in developing and applying HTW-CIMS is introduced.
从数字控制技术、测量技术和智能加工技术三方面论述了活塞外圆智能加工系统的总体规划和一些关键技术问题。
This paper presents the overall scheme of the intelligent machining system for pistons from digital control, measurement and intelligent machining techiques. Some of key technologies are discussed.
介绍了房屋管理信息系统建设总体应用规划、总体数据规划的思路，并针对具体技术问题提出了一些看法。
This paper introduces the overall application plan and overall data plan of the construction of the management information system, and puts forward some opinions about concrete technical problems.
并对平台的总体结构、设计思想、系统构建方式和实现技术途径进行了分析。
It also processes analysis of its collectivity structure, design thinking, construction mode and discusses the key technique of realization.
针对这种需要，提出了一种个性化信息过滤系统的模型，介绍了其总体结构，并深入分析了其关键技术。
To meet this need, this paper puts forward a model of the individualized information filtering system, introduces its framework, and elaborates its key technologies.
针对这种需要，提出了一种个性化信息过滤系统的模型，介绍了其总体结构，并深入分析了其关键技术。
To meet this need, this paper puts forward a model of the individualized information filtering system, introduces its framework, and elaborates its key technologies.
应用推荐