数字主控制器数字主控制器是用于控制设备电力系统的装置。在康明斯开关柜中数字主控制器是选配件。
Digital Master control (DMC) This device is designed to control the power systems in a facility. It is offered as an option on Cummins switchgear.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
该系统由前端传感器、电压匹配电路、主控制器和事故后处理软件组成。
The system is composed of sensor, the circuit of voltage matching, main controller and dealing software.
本系统由CONFIDENT定位系统、GPS定位系统和主控制器系统组成。
This system is composed of GPS orientation system and CONFIDENT orientation system and main controller system.
智能涡街流量计系统由涡街传感器、温度传感器、压力传感器、液晶显示模块、主控制器等几个部分组成。
The intelligence vortex flowmeter system is consisted of vortex sensor, temperature sensor, pressure sensor, LCD module and master controller, etc.
介绍了多深度深海浮游微生物浓缩取样器的工作原理，确定了由便携式输入装置和主控制器构成的控制系统结构。
The working principle of multi - depth deepsea microplankton sampler is introduced. The control system is composed of portable input device and main controller.
提出一种新型的过热汽温控制方案，主控制器基于自适应神经网络模糊推理系统(ANFIS)进行设计。
A new superheated steam temperature control system design scheme is proposed, the main controller design is based on Adaptive Network-based Fuzzy Inference system (ANFIS).
介绍力-位置型力感觉系统的基本工作原理，阐述以8031单片机为主控制器的系统构成。
The basic operational principle of the force-position type sensing system is introduced and the composition of the system with 8031 single chip computer as the main controller is described.
其中系统的组网研究与主控制器的软硬件研制是本文讨论的重点。
And, the research of establishing system's net and the design of Main Controller's hardware and software are the keystone of this paper.
系统中采用了AT 89 C 2051型单片机作为主控制器。
The system utilizes AT89C2051 microcomputer as major controller.
本设计实现了在MIC总线冗余系统中主控制器与从控制器间的数据通讯。
This design realizes the data communication between the main controller and accessary controller in MIC bus redundancy system.
USB技术在嵌入式系统中有两种主要的应用方式：即作为USB总线设备的USB设备方式和作为USB主控制器的嵌入式USB主机。
There are generally two modes of USB technology could be used in embedded systems, one is the USB device mode using as USB Devices and the other is USB host mode using as USB Host Controllers.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该系统基于80C31单片机为主控制器，采用了混合式稀土永磁步进电机为执行部件，并以双通道旋转变压器为天线位置传感器。
The system adopts 80C31 MCU as the main controller, hybrid Rare-Earth permanent magnet stepper motor as the execution component, bio-passage rotary transformer as antenna position sensor.
设计了以TMS320 LF 2407为主控制器，电动汽车用开关磁阻电动机数字化驱动系统。
A switched reluctance motor (SRM) drive system used in electric vehicles was designed, which utilized TMS320LF2407 as main controller.
采用受限单极模式P WM系统作为全数字化控制器主控通道，是实现控制器快速可靠设计的关键技术。
The key technology of realization of quick and reliable design of controller is to apply the limited unipolar pattern PWM system as the primary channel of the fully-digitized controller.
介绍了系统PLC主控制器I/O端口设计，系统硬件组成和系统软件中主程序及自动加工子程序设计；
The I/O design of PLC controller, the hardware configuration and the main routine and auto-machining subroutine of software program are presented.
该主控制器通过电磁兼容测试、高低温及振动测试后，系统工作正常。
The main controller passed the electro-magnetic compatibility tests, high and low temperature tests and vibration tests and presented a normal working condition.
研究利用PIC 16c54单片机作为主控制器的低成本家用空调电话远程控制系统。
This article is about a low-cost telephone remote control system of the domestic air-conditioner based on PIC16C54 MCU.
采用MCS-51单片机为主控制器，用于步进式冷床同轴的直流调速系统，比较成功地解决了强力矩耦合情况下的双机转矩平衡问题。
MCS - 51 computer on slice is used as the main CPU in the step DC governor system for cold bed solving problems of two unit torque equilibrium under heavy moment coupling.
本文介绍一种以8098单片机为主控制器的数字PID控制系统。
A numerical PID control system which USES 8098 single chip microcomputer as its main controller is introduced in this paper.
在制冷空调综合系统的设计建设中，采用S7- 200型PLC作为系统的主控制器，对能实现制冷和中央空调实验实训的综合实验室进行全自动控制。
In the design and construction of refrigeration and air-conditioning synthesis system, the full automatic control is done by adopting S7-200 PLC as main controller.
冷辗机控制系统以工业PC为主控制器，通过相应的功能模块实现对冷辗进程的实时监控。
Industrial PC is the master processor of the cold rolling machine. The process of cold rolling monitored by the corresponding functional component real-timely.
底层主控制器与上位机之间采用以太网进行通信，实现了对系统的远程控制。
Ethernet communication is used for communication between the host computer and bottom controller to implement remote control of the system.
介绍以omron C2 0 0 H可编程控制器为主控机，配有上位计算机的啤酒糖化工艺计算机控制系统。
A computer control system for beer saccharification process is introduced which is equiped with a superior computer and takes an OMRON C200H as its programmable controller.
采用西门子s7- 200PLC为主控制器，配以人机界面TD 400c和通信模块EM277，设计了某除湿机控制系统。
This paper USES S7-200 PLC as main controller to design a dehumidifier control system, which is equipped with HMI TD400C and communication module EM277.
系统采用SPCE061 A微控制器为主控单元，特别指出了软件设计中需注意的几个问题，最后利用软件对实验数据进行误差修正。
SPCE061A MCU is adopted as central control unit. Especially, we point out several problems which must be paid attention to in the program, and correct the error of experiment data in the end.
本文介绍一种以可编程控制器为主控单元的脉动真空蒸汽灭菌器的电气控制系统。
This paper introduces an automatic control system with PLC for pulse vacuum steam sterilizer.
该系统主要由主控制器模块、超声波发射模块、超声波接收模块和显示模块等四个模块构成。
The system primarily composed by the four modules: the controller module, ultrasonic launch module, ultrasound receiving module and display modular.
该系统主要由主控制器模块、超声波发射模块、超声波接收模块和显示模块等四个模块构成。
The system primarily composed by the four modules: the controller module, ultrasonic launch module, ultrasound receiving module and display modular.
应用推荐