也进一步的分析也是在高温环境下的低精度因素。
Further analysis also suggested this was also the cause for low accuracy under high temperature environments.
在影响测量数据精度因素中，折射误差是主要误差源之一。
The refraction error is main error source among the factors effecting measure data accuracy.
通过对影响配料精度因素的分析，设计了一种基于动态神经网络的配料控制系统。
A kind of mixture control system, based on dynamic neural network, is designed through analyzing the influence precision factors of mixture.
最后，还对影响系统控温精度因素、初始化对控温稳定性影响等问题进行了详细的分析并指出了下一步努力的方向。
At last, we analyze the factors which affect the control precision and the question of initialization affecting the stability of control. We also point out the direction we will try hard to.
本文从工程实际出发，分析了影响电液位置伺服系统精度误差的来源，并对各主要因素作了定量的分析计算。
This paper analyzes the sources of effecting the error of the accuracy in electrohydraulic position servo system, and carries out quantitative analysis and calculation to main factors.
本文主要就采用这一方法测光速时，对影响测量精度的主要因素进行了分析。
This paper mainly on the speed meter of this approach, the main factors affecting measurement accuracy are analyzed.
在影响平衡精度的因素中，软、硬支承只是一个微不足道的因素。
Soft and hard bearing is only a minor factor in the factors that affect the balance precision.
如果发现一台传动轴平衡机的精度不能满足要求，那一定是其它因素造成的结果。
If it is found that the accuracy of a drive shaft balancing machine can not meet the requirements, it must be the result of other factors.
在钻孔加工过程中，存在许多影响孔的精度的因素。
In the course of drilling, there are many facts effecting hole's accuracy.
这个领域里的现象之所以在精度预测的范围之外，是因为起作用的因素的庞杂，而不是自然界中没有什么秩序可言。
Occurrences in this domain are beyond the reach of exact prediction because of the variety of factors in operation, not because of any lack of order in nature.
分析了测试精度及其影响因素。
The measurement precision and its effect factors are analysed.
由于电容式粮食水分检测中影响检测的因素较多，检测精度很难取得令人满意的测量效果。
Difficulty was known to get satisfactory measurement effect on precision in capacitive grain's moisture measurement due to many influencing factors.
本文从控制理论的角度出发分析了影响微机控制的中型绘图机精度的各种因素。
Factors affecting the precisions of a microcomputer-controlled platform draughter are discussed in the view of the control Theory in this paper.
当然，这一方法在实践中的运用还会受到环境因素、仪器精度等的限制。
Of course, the method is limited by environmental factor and precision of instrument when used in practice.
由于阻抗法易受过渡电阻、互感器误差、线路结构不对称等因素的影响，所以测距精度不高。
Because the impedance fault location method is easily influenced by the factor such as fault resistance, transformer error and asymmetrical line configuration, the fault location accuracy is lower.
阐述了金属反射镜的设计，包括反射镜材料的选择，反射镜结构的选择，分析了影响金属反射镜面型精度的因素。
The design of metallic mirrors which including materials selecting and structure designing as well as factors of influencing surface for metallic mirrors are discussed.
文章重点论证和提出了影响因素筛选、多边形网格单元划分的原则及预测精度评价的原理方法。
The paper was emphasized to demonstrate and present influencing factors sifting method, principles to divide polygon mesh units and to check predicted exactitude evaluation.
最后，讨论了影响测试精度的因素。
At last, the factors which can effect the testing accuracy are discussed.
同时也讨论了影响表层测定精度的两个特殊因素。
Two special factors which influence the accuracy of calibration for top soil have been discussed also in this paper.
利用仿真模型分析了间隙、死区等非线性因素对系统精度的影响，并给出了提高传动系统性能的措施。
According to simulation model, the effect of backlash and dead zone nonlinear factors on systematic performances was analyzed, and the measures of improving the systematic performances were given.
从理论和试验两个方面分析和研究噪声对识别精度的影响，影响识别精度的因素，以及部分模态成分的模态参数不能够被识别的原因。
The influence of noise on identification precision, the effect factor of the computing precision and the reason of missing estimation some modes were analyzed and discussed.
棒材热连轧生产过程中，影响产品最终尺寸精度和性能的因素较多。
In multi pass hot bar rolling, there are many complicated influences which may affect the final dimensional precision and mechanical properties.
最后通过对实验结果的分析，探讨了影响电梯平层精度的因素并提出了相应的改进措施。
Through the analysis of the experiment results, discusses the factors affecting the layer precision of the elevator, and finally presents, the improving measures.
介绍了基于CCD齿轮参数测量系统的组成及其测量方法，并对影响测量精度的因素进行了分析。
The measurement system and measurement method of gear parameters based on CCD were introduced, and then influence factors of measurement precision were analysed.
本文主要分析影响某弹道测量与修正雷达系统测角精度的误差因素。
This paper analyzes the impact of a radar system trajectory measurement and correction of error Angle measurement accuracy factor.
如实时设定的实际采样率和压力传感器零点、对传感器校准与标定的正确性等诸因素均可影响实测数据的精度。
Important factors include the sampling rate, the zero point of pressure sensor, and the correct calibration of sensor, the revised program and algorism may improve the precision of measurement.
如实时设定的实际采样率和压力传感器零点、对传感器校准与标定的正确性等诸因素均可影响实测数据的精度。
Important factors include the sampling rate, the zero point of pressure sensor, and the correct calibration of sensor, the revised program and algorism may improve the precision of measurement.
应用推荐