本文列举了加工精度分析计算的实例。
An example of analytical calculation of machining precision is given in the paper.
格式精度分析采用泰勒级数展开的方法。
同时对系统在细分误差补偿前后作了精度分析。
Meanwhile the system precision has also been analyzed before and after the subdivision error was compensated.
介绍了干涉仪测向的基本原理，进行了精度分析。
The paper introduces the direction-finding fundamental of the interferometer, analyses the precision.
文中还分析了各种测试方法的应用场合及精度分析。
In this paper the applicability of various measuring methods and estimation of measuring precision are also discussed.
传统的齿轮精度分析及设计既耗时又难以保证设计的精度和质量。
The traditional gear precision analysis and design work is not only time-cost , but also hard to acquire higher precision and quality .
这要求我们更加依赖于对信号及电源问题的高速度高精度分析手段。
Now we depend on signal and power analytical method with high speed and high precision more and more.
空间数据的精度分析和质量控制是地理信息科学研究的主要内容之一。
The precision analysis and quality control of spatial data is one of the main contents of the research on geographic information science.
就工作原理、试验装置、量测方法及精度分析等方面作出了一些结论。
Finally, some conclusions are made on the experimental device, operation principle, method of measuring and accuracy analysis.
对组合定位中定位误差的分析和计算是夹具精度分析中的一项重要内容。
Analyzing and calculating location error is an important content of the fixture accuracy analysis.
介绍了该装置的测量原理、光学系统、电路设计、精度分析和性能特点。
The measuring principle, optical system, circuit design, error analysis and function features of the device are introduced.
将GPS卫星高度和方位角预报值与实际跟踪值比较，进行了精度分析。
To compare the elevation and azimuth predictions of GPS satellite with actual tracking data, the error analysis has been made.
并以某小型飞行器为例，分别给出了两种测距方法的设计原理及精度分析。
The principle of distance measurement and accuracy analyse are given by means of an example of the small aircraft.
由于此操作不依靠测试人员的调整，所以对焦精度分析一般是可重复和十分一致的。
The focusing accuracy analysis is repeatable and quite consistent, since it does not depend on the judgment of the tester.
介绍了这种传感器的设计思想、工作原理、波形分析、精度分析和样机试验效果等。
The design idea, the working principle, the wave analysis, the precision analysis and the experiment effect of the sensor are introduced.
通过对汽油机在不同控制方式下的控制精度分析，得出其相应的不确定度计算方法。
According to the different controlling precision, we can obtain the different calculation method of the precision analysis.
经试验和精度分析证实：该样机在动态时的测量精度能满足钢轨磨耗测量精度的要求。
Test and analysis prove that the prototype measurement accuracy under dynamic fulfills the accuracy requirement of the rail wear measurement.
通过精度分析，该方法可达到四等水准测量的精度，提出了提高观测精度的相应措施。
The method can achieve fourth-grade leveling survey precision demand by precision analysis, and then brings forward some measure to increase observation precision.
通过对比测量和精度分析表明该方法测量精度高，测量装置结构简单，具有实用价值。
By comparing measuring and analyzing precision, it proves that the measurement is of high precision, simple structure and practical value.
通过对比测量和精度分析表明该方法测量精度高，测量装置结构简单，具有实用价值。
By comparing measuring and analyzing precision, it proves that this method is of high precision, simple structure and practical value.
关于变轴数控机床精度研究，目前绝大多数工作集中在精度分析和静态运动学标定方面。
With regard to accuracy studies on the variable-axes numerical control machine tool, at present, the primary attempts have been focused on accuracy analysis and static kinematic calibration.
文中的精度分析和稳定性分析表明该差分格式在等步长条件下具有二阶精度、无条件稳定。
Accuracy analysis and stability analysis indicate that this scheme has two order accuracy and is unconditionally stable when grid size is constant.
经过模型计算、精度分析及地震信号处理中的若干运用，表明了该方法的有效性及可靠性。
From the results of model processing, precision analysis and seismic signal processing, it can be concluded that this algorithm is effective and dependable on seismic signal processing.
根据水下平台晃动的规律建立了晃动模型，对水下晃动平台姿态估计的精度分析展开研究。
The accuracy analysis of attitude estimation of underwater swaying platform is the main purpose in this paper.
介绍莲花水电站大坝面板及溢洪道外部变形自动化监测系统设计、测量精度分析及运行情况。
This paper introduced the design, measurement accuracy and operation of the automatic external deformation monitoring system for dam slab and spillway of Lianhua hydropower station.
本文论述了固体火箭发动机0.5%高精度测试系统的设计原则、结构特点和精度分析方法。
In this paper, the design principle, structure features and the accuracy analysis method of a test system with accuracy of 0.5% for solid rocket engines are introduced.
从理论精度分析入手，根据算例反映图形对精度的影响规律，探讨了观测误差最小时的图形位置。
On the basis of theoretical monitoring accuracy analysis and the influence rule which the example reflects on monitoring accuracy, this paper proposed the pattern of minimum surveying error.
接着指出并联机床精度分析的关键是建立刀具位姿误差模型，并提出并联机床误差模型的建立思想。
The key of the precision analysis of the PMT is to establish cutting tools pose error model, and put forward the establishing idea of error model of the PMT.
接着指出并联机床精度分析的关键是建立刀具位姿误差模型，并提出并联机床误差模型的建立思想。
The key of the precision analysis of the PMT is to establish cutting tools pose error model, and put forward the establishing idea of error model of the PMT.
应用推荐