依据简化的力学模型，按照结构动力学原理和方法计算其反应。
According to the simplified mechanical model, it can be calculated by the principle of structure dynamics and methods.
在此基础上提出了一个简化的力学模型，并进行了弹性力学和有限元分析。
One simple model was put forward and elasticity and FEA (finite elementary analyzing) analysis were provided.
本文首次提出一个简化的力学模型，试图探讨细胞挤入二维狭缝的运动特性。
This paper proposes, for the first time, a simplified mechanical model in an attempt to treat the motion of a cell sliding into a two-dimensional slit.
本文首次提出一个简化的力学模型，试图探讨细胞挤入圆孔的轴对称运动特性。
This paper proposes, for the first time, a simplified mechanical model in an attempt to treat the axisymmetric motion of a cell sliding into a circular pore.
本文用简化的力学模型对龙门起重机和装卸桥小车撞击缓冲器时的动力响应进行理论分析。
Resorting to a simplified mechanical model, this paper makes a theoretical analysis of the dynamic response of the gantry crane and loading bridge when their their trolleys collide with buffers.
将铰接式车辆简化成六自由度的动力学系统，建立了能反映率体平面运动和横向摆动的动态数学模型。
In this paper, the articulated vehicle is simplified to a six-free-degree system in dynamics, and a dynamic mathematical model was derived and established.
建立链子崖软弱层变形的简化力学模型。
The simplified mechanics model of soft stratum deformation is built up.
首先，基于简化的软着陆动力学模型，通过求解特殊两点边值问题，给出了一种实时显式制导方法。
Firstly, based on simplified dynamics of lunar soft landing, an explicit guidance law was induced by solving the special two-point boundary value problem.
本文考虑一类振动落砂机简化力学模型的次谐运动、稳定性与分叉问题。
The subharmonic motions, stabilities and bifurcation problems for a simplified model of shaker are considered.
将该系统简化为单自由度分段线性恢复力，含平方阻尼的运动学分析模型，建立了铰接装载塔系统的分段非线性动力学方程。
The system is simplified into a single degree of freedom model with piecewise linear restoring force and square damping, the piecewise nonlinear motion equation is established.
同时根据溶洞顶板的特征和边界条件，将其简化为椭圆形和圆形顶板两种力学模型。
According to the characteristic and the boundary conditions, the cavity roof is respectively simplified as two kinds of mechanical models (round model and ellipse model).
本文将高匹配焊缝或热影响区(haz)淬硬层中含纵向裂纹的焊接接头简化为硬夹层含平行裂纹的力学不均匀体模型。
In the paper welded joints with a crack in transverse overmatched weld or HAZ were simplified into a model in which a transverse hard layer contains a crack parallel to the interfaces.
针对旧污水沉降罐在安装刮泥机后的受力可靠性问题，建立了简化力学模型和三维弹塑性有限元模型。
The simplified mechanical model and three-dimensional elastic-plastic finite element models was found to analyze the reliability of sewage settling tanks equipped with scraping sludge machine.
运用拉格朗日动力学方程对简化的机器人模型分别在单、双脚支撑期进行了动力学建模，得到了一个便于控制的动力学模型。
By Lagrange dynamic equations, the dynamic model of the simplified biped is given respectively in the period of single-foot support and double - foot support, and this model is easy to control.
将该系统简化为单自由度分段线性恢复刚度，含平方阻尼的动力学分析模型，建立了铰接装载塔的分段非线性运动方程。
The system is simplified into single degree of freedom dynamics model with piecewise linear restoring forces and square damping, then the piecewise nonlinear motion equation of ALT is established.
在忽略大气扰动情况下，简化出无大气扰动情况下的动力学模型。
And in the condition of ignoring atmospheric disturbance, the dynamic model is predigested.
根据简化的动力学模型，提出了相对间隙变化规律的计算和程序。
Bated on a simplified dynamic model a computer program of the relative clearance variation is presented.
发动机机匣上安装凸台结构，可简化为机匣壳体开孔后用围壁和加强板组合补强的力学模型。
On engine cases, installation base can be simplified by a mechanics model, which is case shell with hole and a complex of enclosing wall and reinforcing plate for increase strength.
简述了已知的粒子质量公式，由动力学的对称性自发破缺机制导出粒子的动力学模型和振动-转动模型，其简化形式是谐振子模型。
The dynamical model and the oscillation-rotation model of particle are derived from the dynamical mechanism of spontaneously break symmetry, and its simplified form is a harmonic oscillator model.
该文通过对带铝套管的分段弹侵彻半无限钢靶的研究分析，以流体动力学和侵彻力学为基础，提出了一个分段弹垂直侵彻半无限厚靶的简化模型。
In study of the penetration of a segmented rod with aluminum carrier tube into semi infinite steel target, we present a simplified model of based on hydrodynamics and penetrating mechanics.
针对粘性土壤提出了一个简化力学模型，数值模拟了具有一定粘性的土壤与波纹型推土板之间的作用力。
A simplified mechanical model of sticky soil with certain viscosity was proposed for simulating the force between the soil and corrugated bulldozing plates.
实现六足并联机构高速，高加速运动控制的关键在于所建动力学模型的准确表达、适当简化以及实时计算速度的满足。
The motion control of the hexapod parallel mechanism with high speed and high acceleration depends on the accurate dynamics model, proper simplification and real-time computing.
为了深入研究阵列的动力学行为，提出了一种简化的阵列相位连续模型并通过傅立叶级数法求得了解。
To intuitively understand the dynamic behavior of the array, a simplified phase continuum model was proposed and solved via Fourier series.
为了简化吸收循环热力学分析方法，通过吸收循环和压缩式循环的对比，提出吸收循环卡诺模型分析方法。
The Carnot analysis method was proposed for the simplification of the thermodynamic analysis of the absorption cycle, by the comparison of the absorption cycle and the compression cycle.
将透气阀圆形弹性阀片的应用结构简化为了环形结构，建立了阀片受均布载荷时的力学模型，并研究了阀片的弯曲变形。
The circular elastic slice of degassing valve was simplified as ring mechanics and the mechanic model of the slice under uniformly distributed load was established to investigate its deformation.
介绍了床身有限元分析的力学模型简化方法，结合实例对床身的应力场和位移场进行分析。
In this paper the mechanics model simplification for finite element analysis was illustrated with several practical examples.
在分析了外设动力式采煤机锚链牵引特性的基础上，将其动力学模型简化为具有质量的弹簧—质量系统。
On the basis of analyzing traction property of anchor chain of the shearer operated by outside power, the kinetic model is simplified as spring_mass system with mass.
最后，用简化的对接动力学模型计算出一些模拟结果。
Finally, some simulation examples with the simplified docking model are presented.
针对多孔介质特殊的孔隙结构特征，建立了一个新的简化孔隙力学模型，并由该模型导出了渗透率与有效应力的二次多项式关系。
A new simple pore mechanics model is established based the pore structure of low permeability reservoir rock, from which the quadratic equation of effective stress and permeability can be educed.
针对多孔介质特殊的孔隙结构特征，建立了一个新的简化孔隙力学模型，并由该模型导出了渗透率与有效应力的二次多项式关系。
A new simple pore mechanics model is established based the pore structure of low permeability reservoir rock, from which the quadratic equation of effective stress and permeability can be educed.
应用推荐