该系统利用微机控制，通过硬件控制系统设计和软件设计，实现了曲轴疲劳极限测试、数据处理等全过程的自动控制。
This testing system use microcomputer-control, by designing the hardware and software, to carry out the testing of fatigue-limit of crankshaft, and data process controled automatically.
在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。
On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
己完成了单片机通信控制系统硬件设计和软件编写与调试任务；
I have completed hardware design of micro-control system, software writing and debugging.
本文介绍了协同式三自由度运动平台计算机控制系统的硬件设计及实现方法。
This paper presents hardwares design and realization of computer control system of three degree - of - freedom motion platform.
本文还设计具体的硬件接口电路，说明其工作原理，给出应用于染色机喷头控制系统的程序流程。
The paper also design some specific hardware interface circuit to explain its word principle. And also explained program chart of dyeing machine blow head in the application.
采用开放式架构设计将重点从硬件设计转向以控制系统为中心的系统设计，同时也增加了软件设计的灵活性。
An open architecture design will add flexibility by shifting the focus of the control systems from being hardware-centric to more software-centric.
主要介绍了OMRON公司的CPM1A系列在太阳能热水器自动控制系统中的应用，重点阐述了系统的硬件构成及系统软件的设计过程。
Application of OMRON CPM1A series PLC in solar water heater automatic control system is mainly introduced, emphasises on the system hardware constitution and the system software design process.
在此基础上完成了电厂化学水处理控制系统硬件配置和软件设计。
On the basis, it completes hardware configuration and software design of chemical water treatment control system.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
基于CAN总线的飞行控制系统不仅可以节约硬件成本和设计、安装费用，同时还可以节约系统软硬件的后期维护费用。
The flight control system based on CAN bus does not only save hardware cost and installation cost, but also save its later maintenance cost.
本文详细叙述了快热式家用电热水器控制系统硬件电路和软件的设计。
This article details the rapid thermal control system for home electric water heater hardware circuit and software design.
在控制系统总体结构设计和硬件设计的基础上，详细论述了自动加煤和自动除灰的程序流程设计。
Based on the design of global structure and hardware of the control system, detailed program flow design of automatic coal stuffing and slag removing is presented.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
文章分析了这些要求，并提出了控制系统硬件和软件的设计。
Analyzation on those requirements is made and design of both hardware and software for the control subsystem is proposed.
同时给出了控制算法与控制系统的软、硬件设计。
The software and hardware of the control system and control algorithm based on DSP were designed.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
充分利用机电设备控制系统中plc的硬件资源，可简化诊断系统的硬件设计。
Making the most of electromechanical facility to control the hardware resource of PLC in the system can simplify the design of hardware in diagnosing system.
介绍了一个污水泵站的控制工艺和控制要求，阐述了泵站自动控制系统中plc的硬件、软件设计。
The technology process and the control demands of a waste water pump are presented, and the design of hardware and software based on PLC for the pump station automatic control are described.
介绍了检测台的工艺流程及控制要求，对PC自动控制系统的硬件及软件设计作了充分的讨论。
Introduces the process of the test and the control requirements and discusses the design for the hardware and software of the PC system.
用TMS320F 2407作为系统核心控制芯片，对控制系统的硬件电路和软件设计进行了研究。
Additionally the control system's hardware circuit and software design are studied with TMS320F2407 as its core chip.
介绍触摸屏和PLC在脉动真空灭菌器控制系统中的应用研究。重点介绍了控制系统的硬件配置以及软件设计。
This paper introduces the application study of touching screen and PLC in control system of the pulsant vacuum sterilizer. It mainly discusses the hardware configuration and software design.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
文章中对RTU控制器原理和系统结构进行详细论述，对控制系统的硬件和软件分别进行了设计实现。
This paper expounds the principle of the RTU controller and the structure of system, which designs the hardware and software for the controlled system.
文章中对RTU控制器原理和系统结构进行详细论述，对控制系统的硬件和软件分别进行了设计实现。
This paper expounds the principle of the RTU controller and the structure of system, which designs the hardware and software for the controlled system.
应用推荐