之后，一样的，会有为数众多的硫化剂和促进剂。
Then, too, there are numerous vulcanizing and accelerating agents.
不溶性硫(IS)是生产子午线轮胎的专用硫化剂。
Insoluble sulphur (is) is exclusively vulcanizing agent for production of radial ply tyre.
研究了硫化剂TCY对丙烯酸酯橡胶（ACM）的硫化特性。
The vulcanization behavior of acrylate rubber(ACM) cured with trithiocyanuric acid(TCY) was investigated.
研究了PDM和TAIC两种助硫化剂对共混胶性能的影响。
The effect of two kinds of additives(PDM, TAIC)on the properties of EPDM/MVQ blends was investigated.
研究了新型固体硫化剂硫代硫酸铵对加氢脱硫催化剂的预硫化。
Ammonium thiosulfate as a novel sulfiding agent was used for desulfidation of hydrodesulfurization ( HDS) catalysts.
对硫化剂双酚af，促进剂bpp在氟橡胶中的应用进行了研究。
The application of curing agent bisphenol-AF and accelerator BPP to fluorine rubber was investigated.
研究了硫化剂DTDM在载重斜交轮胎内外层胶料配方中的应用。
The application of curative DTDM to the ply compound of bias truck tire was investigated.
硫化时间、硫化剂含量以及硫化温度等因素影响着吸波材料的力学性能。
Mechanical characteristics are affected by some factors, for example, contents of sulfuration reagent and sulfuration time and temperature.
开发新型廉价的硫化剂或探索成本较低的补硫方法是目前亟待解决的问题。
The immediate task is to develop new types of cheap curing agents or to find a low-cost post-curing method.
结果表明，硫化剂TCY和硫黄用量对ACM 硫化胶的耐油性能影响不大；
The results showed that the addition level of TCY and sulfur had little effect on the oil resistance of ACM;
研究了硫化剂双酚AF、促进剂BPP用量及硫化温度对氟橡胶硫化特性的影响。
The effect of the levels of bisphenol AF and BPP and the cure temperature on the cure characteristic of fluorine rubber was investigated.
差示扫描量热法和动态力学分析测试结果均表明IIR和树脂硫化剂相容性较好。
It was found by DSC and DMA that IIR was quite compatible to resin curative.
通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM).
经分析，可尝试利用单质硫磺作为硫化剂，但其工业化可行性有待进一步研究探索。
Analysis suggests that sulfur can be used as curing agent. But its commercial viability is yet to be studied.
首先，用直链烯烃和单质硫为原料合成硫化剂，再将该硫化剂负载到耐硫变换催化剂中；
First, the use of straight-chain olefins and sulfur were synthesized as curing agent, then loaded the curing agent to the sulfur-tolerant shift catalyst;
不溶性硫磺是一种性能优异的橡胶硫化剂和硫化促进剂，主要用于钢丝子午线轮胎的生产。
Insoluble sulfur is a high performance vulcanizing agent of the rubber and vulcanizing accelerator, which is mainly used to produce steel radial-ply tire.
结果表明，通过改变聚合物组分的配比和硫化剂的用量，可得到力学性能较好的复合材料。
Tensile testing shows that broad mechanical properties could be obtained by varying the component ratio of polymer and vulcanizing system.
研究了双酚硫化体系的硫化剂双酚AF和促进剂BPP的变量对氟橡胶硫化特性和物理性能的影响。
This paper presents researches that AF and BPP's variables have impacts on F-rubber's sulfuration and physics properties.
在上述混炼胶中加入适量的柔软剂和硫化剂DCBP ，制得在室温下贮存稳定的单组分硅橡胶糊状物。
An one part silicone rubber paste was made by blending of suitable softening agent and DCBP vulcanizing agent in aforementioned rubber compounds.
考察了结构化控制剂种类、硫化剂种类及其用量对共聚氟硅橡胶SKTFT - 2 5耐油性能的影响。
The effects of the type of structurized control agent, type and content of curing agent on the oil resistance of the copolymerized fluorosilicone rubber SKTFT 25 were discussed.
介绍了硅橡胶发泡胶带的制备工艺，以及发泡剂、硫化剂用量的影响，确定了胶带的配方及其质量控制标准。
The technology of making the belt of foaming silica rubber, the level of foaming agent and vulcanizator were introduced, the formula and quality standard of the belt were also determined.
所采用的硫化剂可以使PP／EPDM共混物中的EPDM发生动态硫化作用，且使PP接枝于EPDM交联网络上。
The vulcanizing agent used could result a dynamic vulcanization to the EPDM in the PP/EPDM blend, and make PP graft onto the crosslinked network of EPDM.
研究了PPC的添加量、硫化剂的种类及用量、硫化时间、硫化温度和添加炭黑对共混弹性体的物理力学性能、交联度的影响。
The effects of PPC content, curing agent, curing temperature, curing time and adding carbon black on the mechanical properties of the blends were studied.
探讨促进剂NA 22硫化体系和三嗪硫醇（包括硫化剂AF和TCY）硫化体系对二元共聚氯醚橡胶（CHC）性能的影响。
The effects of the accelerator NA-22 curing system and triazine-mercaptan(including curatives AF and TCY) curing system on the properties of epichlorohydrin binary copolymer(CHC) were investigated.
研究国产乙丙橡胶EPDM 4045电缆料的配方，确定了填充剂、硫化剂、增塑剂等各组分的配比，简要阐述了胶料的加工工艺。
The formula of domestic EPDM 4045 compound for cable insulating material is introduced in this paper, After the selection of filler, vulcanization agent and plasticizer, the compound are determined.
研究国产乙丙橡胶EPDM 4045电缆料的配方，确定了填充剂、硫化剂、增塑剂等各组分的配比，简要阐述了胶料的加工工艺。
The formula of domestic EPDM 4045 compound for cable insulating material is introduced in this paper, After the selection of filler, vulcanization agent and plasticizer, the compound are determined.
应用推荐