介绍了硅钢片冲模热处理工艺的改进。
The improvement in the heat treatment technology of the stamping die for the silicon steel sheet was introduced.
烫辊是热轧硅钢片生产不可避免的环节。
Roasting roller is an unavoidable part in the production of hot rolled silicon steel.
适用于冷轧钢片、硅钢片等材料的冲压。
Suitable for punching cold-rolled steel, silicon steel sheet etc.
烫辊是热轧硅钢片生产不可避免的环节。
The cold rolling oil of silicon steel with high detergency was developed.
硅钢片按其含硅量不同可分为低硅和高硅两种。
Silicon steel sheet according to their silicon content can be divided into different low silicon and high silicon two.
探讨了热处理工艺参数对硅钢片电磁性能的影响。
The influence of the parameter of heat treatment technique on electromagnetic property of silicon steel slice is inquired into here.
用它可代替硅钢片制做小型电机中的定子和转子。
It may replace silicon steel sheet as the stator and rotator of small mo-tor.
研究了硅钢片表面形貌与迭装摇片性能之间的关系。
Relationship between the surface and assembling properties of silicon sheets are investigated.
热轧硅钢片在生产过程中不可避免地会产生氧化铁皮。
It's inevitable for-hot-rolled silicon steel sheets to produce oxidized scale in the process.
以硅钢片片为例，如今硅钢片市场已形成了高度过头垄断局面。
Such as silicon steel-for, silicon steel market has now formed a highly excessive monopoly.
主变压器采用进口优质冷扎硅钢片铁芯，其功耗少，空载电流小。
The main transformer uses imported quality cool - rolled silicon - steel plate cores , less power loss and small idle current.
主变压器采用进口优质冷扎硅钢片铁芯，其功耗少，空载电流小。
The main transformer USES imported quality cool-rolled silicon-steel plate cores less power loss and small idle current.
主变压器采用进口优质冷扎硅钢片铁芯，其功耗少，空载电流小。
The main transformer USES imported quality cool-rolled silicon-steel plate cores, less power loss and small idle current.
本文对取向硅钢片降低铁损的激光加工过程进行了热弹塑性分析。
The thermal and elastoplastic analysis in laser processing for lowering the core loss of the grain-oriented silicon steel sheets has been conducted in the paper.
针对电工硅钢片的特点，将磁化曲线简化为两条具有不同斜率的折线。
The magnetizing curve of silicon steel sheets is approximated with two-section line and the saturation degree is defined.
介绍了硅钢片硬质合金复合冲模与凸模、凹模、凸凹模等的制造方法。
The processing methods of compound punching die convex die concave die and die of convex and concave for silicon steel piece cemented carbide are provided.
实验研究了取向硅钢片压磁式测力器的交流工作特性和直流磁化规律。
The alternate-current work characteristic and the direct-current magnetization of the magneto-elastic transducer with the transformer steel have been studied experimentally.
其电磁系统无需采用硅钢片。简化了制造工艺，成本明显地有所降低。
It is unnecessary to use silicon steel sheet in its electromagnetic system, so simplifying manufacture technology and obviously lowering cost.
介绍了硅钢片硬质合金复合冲模与凸模、凹模、凸凹模等的制造方法。
The design method of faceplate oblique edge blanking die, die structure, punch structure and matrix structure were introduced in detail.
通过选择合适的板材尺寸，可以明显提高电机铁心用硅钢片的下料利用率。
Selection of reasonable dimensions of silicon sheet can significantly improve the material utilization of motor core.
本文对激光辐照的软磁材料—Z10硅钢片进行了细致的穆斯堡尔谱研究。
The research is done in details on M ssbauer spectrum of soft-magnetic material silicon steel tape Z10 treated with laser radiation.
通过选择合适的板材尺寸，可以明显提高电机铁心用硅钢片的下料利用率。
Selecting proper sheet sizes can improve material utilization in the manufacturing of electrical machines.
二合一卷料校平装置主要用于电焊机变压器及电抗器硅钢片、铁芯片的加工。
Two-in-one uncoiling and leveling machine processes the silicon-steel sheet and iron slug used in welding machine and potential transformer.
磁选机中电机的定、转子都是由相互绝缘的硅钢片叠成，是电动机的磁路部分。
Separators of motor stator and rotor are made of mutual insulation of silicon steel folded, is the motor magnetic circuit parts.
所谓铁心电感，泛指电感元件磁路介质为电工软铁、硅钢片等铁心介质的电感线圈。
The so-called iron-core inductor, inductance refers to media for the electrical circuit components of soft iron, steel and other iron core inductor coil media.
本横剪线是机光电一体的高科技产品，代表了国内硅钢片铁芯横剪线的较高制造水平。
The device is a mechanic photoelectric hi-tech product, representing the high standard of domestic silicon steel sheet Traverse Cutting Devices.
本文介绍硅钢片剪切自动控制系统的组成、硬软件的设计，并简述了系统的控制特点。
This paper introduces the constitution, the hardware design and software design of automatic control system for silicon-steel piece's cutting.
对于不能直观检查的缺陷（如定子铁芯、硅钢片短路现象），需要借助仪器、仪表检测。
The apparatus and meters can be used to check it, as to the defect of failing to check directly, such as stator armature, the short circuit of silicon steel slice.
聚酯亚胺硅钢片漆具有良好的电气性能、耐热性、附着性、耐辐照性、耐化学腐蚀性等。
The polyesterimide steel sheet vanish has good electrical, heat resisting, adhesive properties and high radiation resistance.
该系列点焊机，主变压器均为进口冷轨硅钢片，因此，主变压器功耗小，各型空载电流小。
Its main transformer is made of imported cold rolled silicon steel, So its power loss is little with low no-load current.
应用推荐