我打算用砂纸打磨这些椅子然后重新刷漆。
这木料上到处是凹坑，需用砂纸打磨一下。
用细粒度砂纸打磨，除去突起的木纹。
这木料上到处是凹坑，需用砂纸打磨一下。
喷完正色用2000号砂纸打磨，然后喷光油。
用砂纸打磨橱柜表面来帮旧橱柜“整容”，然后重新抛光或是上漆。
Give old cabinets a facelift by sanding them down and then refinishing or painting them.
有下陷或小点等瑕疵的地方应通过砂纸打磨去除瑕疵的方法来修补。
Defects from runs and sags shall be corrected by sanding to remove the defect.
修补处相邻的地方应该用砂纸打磨，磨光机或者其他业主认可方法打薄。
The adjacent coating shall be feathered by sanding, grinding, or other methods approved by the purchaser.
如果需要，使用细砂纸打磨或用适当的砂粒轻度喷吹所有的拟敷胶表面。
If required, rub with fine abrasive paper or lightly blast with suitable grit all the surface to which adhesive will be applied.
准备工作包括用砂纸打磨，除去油漆和锈迹，以使表面光滑但又不抛得很光。
This preparation consists of sanding away any paint or rust to obtain a smooth but not highly polished surface.
在环氧树脂底漆上经过补土程序，添加辅料、填补凹陷后用220号砂纸打磨。
This blended and filled the detail repairs as well as the 220 grit surface left in the epoxy primer coat by the blocking process.
选定材料后，要把象牙锯成片、锉成形，然后用砂纸打磨6遍，再用墨汁将象牙表面涂黑后晾干。
Selected material, to sawn ivory films, shape file, and then polished with sandpaper 6 times, and then the surface of ivory black ink will be dry after.
用砂纸打磨或研磨金属表面，准备涂层，并采用静电方法，喷枪或其他涂装设备，漆刷金属表面。
Sand or grind metal surfaces to prepare for coating, and paint metal surfaces using electrostatic method, spray gun or other painting equipment.
接合面必须清洁，干燥，无灰尘或油污，若是塑料物件，应先用砂纸打磨其表面，使之粗糙。
Surface must be completely cleam. dry and free of dust and oil. If applieed on plastic, polish the surface with sand paper to make it rough.
可以选择质量较好的品牌。目前市面上，进口樱花红石材允许用砂纸打磨表面的划痕，有了划痕用户自己处理一下就不见了。
Currently on the market, allowing the import cherry red stone with sandpaper scratches the surface, with the scratch the user's own handle it disappeared.
你可以用砂纸把棱角打磨光滑。
胶水干后准备一些砂纸，把封面的边缘稍稍打磨光滑。
Grab some sandpaper after the glue has dried, and wear down the edge on both sides.
要用砂纸进行手工打磨以除去这些不好清理的残留。 并用高压风进行细致吹尘。
To use sandpaper polished to remove these residuesthat hard to cleaning and use high pressure air to blow away the dustcarefully.
她用砂纸把桌角打磨光了。
他用砂纸把木结构的部分打磨光滑。
打磨：运用耐水砂纸蘸水打磨，这可有效避免铜版粉尘飞入肺中。
Sanding: use wet sandpaper with water, this avoids copper dust to fly straight to your lungs.
用砂纸把木料打磨光滑。
碳化硅涂层砂纸，具有极好的柔软性、耐水、耐酸、碱及各种溶剂，主要用于家具、木材、汽车、船体、机床腻子的打磨，精密仪器的抛光。
High quality, anti-clogging, good softness, water-resistance, acid-resistance. For polishing and finishing of ship, car, machine putty and finishing precision instrument.
基层处理：粘贴的聚苯板表面应尽量平整、坚固、清洁，必要时可用粗砂纸适当打磨。聚苯板间应压紧，可能出现的板缝须用保温材料或发泡胶填充。
Base treatment: clean and level the surface of EPS board substrate. Distance between EPS board should be filled with thermal insulation materials.
基层处理：粘贴的聚苯板表面应尽量平整、坚固、清洁，必要时可用粗砂纸适当打磨。聚苯板间应压紧，可能出现的板缝须用保温材料或发泡胶填充。
Base treatment: clean and level the surface of EPS board substrate. Distance between EPS board should be filled with thermal insulation materials.
应用推荐