在这副前盖模具设计方法上，有一些比较新颖的设计想法。
As for the design method of front cover mold, there are some quite novel design ideas.
1：模具名称：P-201包装用纸管（纸管本体，上盖，下盖，挤出嘴）。
Mould name: P - 201 packing paper tube（paper tube body，top cap，bottom cap and the extrusion nozzle）.
本次设计的是DVD遥控器前盖塑料模具，制件的结构决定了该模具必须同时使用侧抽芯。
This remote controler front cover of DVD molding die must include special slide pull structure because the structure of the product.
我有一些平板端盖焊接起来用腿和模具材料的淤塞。
I had some flat plate end caps welded up to use as legs and mold material blockages.
对两种尺寸范围的防尘盖的冷冲压工艺及模具进行了对比分析，对生产具有一定指导作用。
The cold stamping technology and die of two size range of dust cover were compared, there were some guidance roles on production.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了冰箱上铰链盖的结构特点，介绍了注射模结构。对该模具的结构特点及主要零部件设计进行了阐述。
Analyzed the structure characteristics of refrigerator hinge-led, introduced the structure of injection mold, the mold structure characteristics and mainly parts design were elaborated.
本文基于UG软件提出了一种复杂曲面覆盖件模具的分区加工方法，并以汽车前盖内板的凸模加工为例，详细介绍了基于该法的模具CAM过程。
The method of divided-area machining for complicated surface panel die based on UG software has been presented with introduction to such CAM process in details of production of an automotive panel.
分析了汽车连杆油封盖拉伸工艺及用冲压成形完成倒角的方法，介绍了关键工位的模具结构。
A drawing process for sealing cover of automobile connecting rod and a method of chamfering by punching were analyzed. The die structures designed for the key procedures were introduced.
通过对门体堵盖的结构和工艺性分析，介绍了该模具的结构设计、工作过程及关键零部件的设计。
Through the analysis of the structure and technological property of the of the doorknob, the mould structure, the working process of the mould, the design of the key part of the mould are introduced.
分析了手机盖零件的成型工艺性能，改进了模具的结构设计，解决了传统设计方法中存在的细小斜推杆强度太差问题。
The forming technology of the cell phone piece was analyzed. The structure of the mould was redesigned to improve the strength of the thin slanted ejector pin.
通过对影视盒面盖的结构及工艺分析，介绍了面盖注射成型模具的设计要点及模具的工作过程。
Based on the analysis of the structure and technological property of the surface lid, the main points of the design and the working process of the injection mould for the surface lid were introduced.
开展了新结构压塑成型模具的设计、制造工作，并在原制盖机上进行了长期试验。
New structure of compression molding mold was designed and manufactured, and the long term test was developed on the original cap making machine.
分析了螺纹盖的成型特点，设计了螺纹盖注射模具。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
此次毕业设计属于冷冲压模具，冲压模具课程设计设计课题为下端盖切口弯曲模具，模具工序由斜刃冲裁和弯曲组成。
Graduation is this cold stamping die design issues for the next Cover incision bending dies die processes by bevelled punching and bending components.
此次毕业设计属于冷冲压模具，冲压模具课程设计设计课题为下端盖切口弯曲模具，模具工序由斜刃冲裁和弯曲组成。
Graduation is this cold stamping die design issues for the next Cover incision bending dies die processes by bevelled punching and bending components.
应用推荐